Solve this by always scaling the y-range for the major/target curve
*before* the final overlay scaling loop; this implicitly always solve
the case where the major series is the only one in view.
Tidy up debug print formatting and add some loop-end demarcation comment
lines.
This is particularly more "good looking" when we boot with a pair that
doesn't have historical 1s OHLC and thus the fast chart is empty from
outset. In this case it's a lot nicer to be already zoomed to
a comfortable preset number of "datums in view" even when the history
isn't yet filled in.
Adjusts the chart display `Viz.default_view()` startup to explicitly
ensure this happens via the `do_min_bars=True` flag B)
For the purposes of eventually trying to resolve last-step indexing
synchronization (an intermittent but still existing) issue(s) that can
happen due to races during history frame query and shm writing during
startup. In fact, here we drop all `hist_viz` info queries from the main
display loop for now anticipating that this code will either be removed
or improved later.
Again, as per the signature change, never expect implicit time step
calcs from overlay processing/machinery code. Also, extend the debug
printing (yet again) to include better details around
"rescale-due-to-minor-range-out-of-view" cases and a detailed msg for
the transform/scaling calculation (inputs/outputs), particularly for the
cases when one of the curves has a lesser support.
As per the change to `slice_from_time()` this ensures this `Viz` always
passes its self-calculated time indexing step size to the time slicing
routine(s).
Further this contains a slight impl tweak to `.scalars_from_index()` to
slice the actual view range from `xref` to `Viz.ViewState.xrange[1]` and
then reading the corresponding `yref` from the first entry in that
array; this should be no slower in theory and makes way for further
caching of x-read-range to `ViewState` opportunities later.
When the target pinning curve (by default, the dispersion major) is
shorter then the pinned curve, we need to make sure we find still find
the x-intersect for computing returns scalars! Use `Viz.i_from_t()` to
accomplish this as well and, augment that method with a `return_y: bool`
to allow the caller to also retrieve the equivalent y-value at the
requested input time `t: float` for convenience.
Also tweak a few more internals around the 'loglin_ref_to_curve'
method:
- only solve / adjust for the above case when the major's xref is
detected as being "earlier" in time the current minor's.
- pop the major viz entry from the overlay table ahead of time to avoid
a needless iteration and simplify the transform calc phase loop to
avoid handling that needless cycle B)
- add much better "organized" debug printing with more clear headers
around which "phase"/loop the message pertains and well as more
explicit details in terms of x and y-range values on each cycle of
each loop.
Previously when very zoomed out and using the `'r'` hotkey the
interaction handler loop wouldn't trigger a re-(up)sampling to get
a more detailed curve graphic and instead the previous downsampled
(under-detailed) graphic would show. Fix that by ensuring we yield back
to the Qt event loop and do at least a couple render cycles with paired
`.interact_graphics_cycle()` calls.
Further this flips the `.start/signal_ic()` methods to use the new
`.reset_graphics_caches()` ctr-mngr method.
Instead delegate directly to `Viz.default_view()` throughout charting
startup and interaction handlers.
Also add a `ChartPlotWidget.reset_graphics_caches()` context mngr which
resets all managed graphics object's cacheing modes on enter and
restores them on exit for simplified use in interaction handling code.
This finally seems to mitigate all the "smearing" and "jitter" artifacts
when using Qt's "coordinate cache" graphics-mode:
- whenever we're in a mouse interaction (as per calls to
`ChartView.start/signal_ic()`) we simply disable the caching mode (set
`.NoCache` until the interaction is complete.
- only do this (for now) during a pan since it doesn't seem to be an
issue when zooming?
- ensure disabling all `Viz.graphics` and `.ds_graphics` to be agnostic
to any case where there's both a zoom and a pan simultaneously (not
that it's easy to do manually XD) as well as solving the problem
whenever an OHLC series is in traced-and-downsampled mode (during low
zoom).
Impl deatz:
- rename `ChartView._ic` -> `._in_interact: trio.Event`
- add `.ChartView._interact_stack: ExitStack` which we use to open.
and close the `FlowGraphics.reset_cache()` mngrs from mouse handlers.
- drop all the commented per-subtype overrides for `.cache_mode: int`.
- write up much better doc strings for `FlattenedOHLC` and `StepCurve`
including some very basic ASCII-art diagrams.
When the minor has the same scaling as the major in a given direction we
should still do back-scaling against the major-target and previous
minors to avoid strange edge cases where only the target-major might not
be shifted correctly to show an matched intersect point? More or less
this just meant making the y-mxmn checks interval-inclusive with
`>=`/`<=` operators.
Also adds a shite ton of detailed comments throughout the pin-to-target
method blocks and moves the final major y-range call outside the final
`scaled: dict` loop.
For the "pin to target major/target curve" overlay method, this finally
solves the longstanding issue of ensuring that any new minor curve,
which requires and increase in the major/target curve y-range, also
re-scales all previously scaled minor curves retroactively. Thus we now
guarantee that all minor curves are correctly "pinned" to their
target/major on their earliest available datum **and** are all kept in
view.
Yah yah, i know it's the same as before (the N > 2 curves case with
out-of-range-minor rescaling the previously scaled curves isn't fixed
yet...) but, this is a much better and optional implementation in less
code. Further we're now better leveraging various new cached properties
and methods on `Viz`.
We now handle different `overlay_technique: str` options using `match:`
syntax in the 2ndary scaling loop, stash the returns scalars per curve
in `overlay_table`, and store and iterate the curves by dispersion
measure sort order.
Further wrt "pin-to-target-curve" mode, which currently still pins to
the largest measured dispersion curve in the overlay set:
- pop major Ci overlay table entries at start for sub-calcs usage when
handling the "minor requires major rescale after pin" case.
- (finally) correctly rescale the major curve y-mxmn to whatever the
latest minor overlay curve by calcing the inverse transform from the
minor *at that point*:
- the intersect point being that which the minor has starts support on
the major's x-domain* using the new `Viz.scalars_from_index()` and,
- checking that the minor is not out of range (versus what the major's
transform calcs it to be, in which case,
- calc the inverse transform from the current out-of-range minor and
use it to project the new y-mxmn for the major/target based on the
same intersect-reference point in the x-domain used by the minor.
- always handle the target-major Ci specially by only setting the
`mx_ymn` / `mx_ymn` value when iterating that entry in the overlay
table.
- add todos around also doing the last sub-sub bullet for all previously
major-transform scaled minor overlays (this is coming next..i hope).
- add a final 3rd overlay loop which goes through a final `scaled: dict`
to apply all range values to each view; this is where we will
eventually solve that last edge case of an out-of-range minor's
scaling needing to be used to rescale already scaled minors XD
In an effort to make overlay calcs cleaner and leverage caching of view
range -> dispersion measures, this adds the following new methods:
- `._dispersion()` an lru cached returns scalar calculator given input
y-range and y-ref values.
- `.disp_from_range()` which calls the above method and returns variable
output depending on requested calc `method: str`.
- `.i_from_t()` a currently unused cached method for slicing the
in-view's array index from time stamp (though not working yet due to
needing to parameterize the cache by the input `.vs.xrange`).
Further refinements/adjustments:
- rename `.view_state: ViewState` -> `.vs`.
- drop the `.bars_range()` method as it's no longer used anywhere else
in the code base.
- always set the `ViewState.in_view: np.ndarray` inside `.read()`.
- return the start array index (from slice) and `yref` value @ `xref`
from `.scalars_from_index()` to aid with "pin to curve" rescaling
caused by out-of-range pinned-minor curves.
Adds a small struct which is used to track the most recently viewed
data's x/y ranges as well as the last `Viz.read()` "in view" array data
for fast access by chart related graphics processing code, namely view
mode overlay handling.
Also adds new `Viz` interfaces:
- `Viz.ds_yrange: tuple[float, float]' which replaces the previous
`.yrange` (now set by `.datums_range()` on manual y-range calcs) so
that the m4 downsampler can set this field specifically and then it
get used (when available) by `Viz.maxmin()`.
- `Viz.scalars_from_index()` a new returns-scalar generator which can be
used to calc the up and down returns values (used for scaling overlay
y-ranges) from an input `xref` x-domain index which maps to some
`Ci(xref) = yref`.
It was getting waayy to long to be jammed in a method XD
This moves all the chart-viz iteration and transform logic into a new
`piker.ui.view_mode.overlay_viewlists()` core routine which will make it
a lot nicer for,
- AOT compilation via `numba` / `cython` / `mypyc`.
- decoupling from the `pyqtgraph.ViewBox` APIs if we ever decide to get
crazy and go without another graphics engine.
- keeping your head clear when trying to rework the code B)
As part of solving a final bullet-issue in #455, which is specifically
a case:
- with N > 2 curves, one of which is the "major" dispersion curve" and
the others are "minors",
- we can run into a scenario where some minor curve which gets pinned to
the major (due to the original "pinning technique" -> "align to
major") at some `P(t)` which is *not* the major's minimum / maximum
due to the minor having a smaller/shorter support and thus,
- requires that in order to show then max/min on the minor curve we have
to expand the range of the major curve as well but,
- that also means any previously scaled (to the major) minor curves need
to be adjusted as well or they'll not be pinned to the major the same
way!
I originally was trying to avoid doing the recursive iteration back
through all previously scaled minor curves and instead decided to try
implementing the "per side" curve dispersion detection (as was
originally attempted when first starting this work). The idea is to
decide which curve's up or down "swing in % returns" would determine the
global y-range *on that side*. Turns out I stumbled on the "align to
first" technique in the process: "for each overlay curve we align its
earliest sample (in time) to the same level of the earliest such sample
for whatever is deemed the major (directionally disperse) curve in
view".
I decided (with help) that this "pin to first" approach/style is equally
as useful and maybe often more so when wanting to view support-disjoint
time series:
- instead of compressing the y-range on "longer series which have lesser
sigma" to make whatever "shorter but larger-sigma series" pin to it at
an intersect time step, this instead will expand the price ranges
based on the earliest time step in each series.
- the output global-returns-overlay-range for any N-set of series is equal to
the same in the previous "pin to intersect time" technique.
- the only time this technique seems less useful is for overlaying
market feeds which have the same destination asset but different
source assets (eg. btceur and btcusd on the same chart since if one
of the series is shorter it will always be aligned to the earliest
datum on the longer instead of more naturally to the intersect sample
level as was in the previous approach).
As such I'm going to keep this technique as discovered and will later
add back optional support for the "align to intersect" approach from
previous (which will again require detecting the highest dispersion
curve direction-agnostic) and pin all minors to the price level at which
they start on the major.
Further details of the implementation rework in
`.interact_graphics_cycle()` include:
- add `intersect_from_longer()` to detect and deliver a common datum
from 2 series which are different in length: the first time-index
sample in the longer.
- Rewrite the drafted `OverlayT` to only compute (inversed log-returns)
transforms for a single direction and use 2 instances, one for each
direction inside the `Viz`-overlay iteration loop.
- do all dispersion-per-side major curve detection in the first pass of
all `Viz`s on a plot, instead updating the `OverlayT` instances for
each side and compensating for any length mismatch and
rescale-to-minor cases in each loop cycle.
Previously we were aligning the child's `PlotItem` to the "root" (top
most) overlays `ViewBox`..smh. This is why there was a weird gap on the
LHS next to the 'left' price axes: something weird in the implied axes
offsets was getting jammed in that rect.
Also comments out "the-skipping-of" moving axes from the overlay's
`PlotItem.layout` to the root's linear layout(s) when an overlay's axis
is read as not visible; this isn't really necessary nor useful and if we
want to remove the axes entirely we should do it explicitly and/or
provide a way through the `ComposeGridLayout` API.
Despite there being artifacts when interacting, the speedups when
cross-hair-ing are just too good to ignore. We can always play with
disabling caches when interaction takes place much like we do with feed
pausing.
When zoomed in alot, and thus a quote driven y-range resize takes place,
it makes more sense to increase the `range_margin: float` input to
`._set_yrange()` to ensure all L1 labels stay in view; generally the
more zoomed in,
- the smaller the y-range is and thus the larger the needed margin (on
that range's dispersion diff) would be,
- it's more likely to get a last datum move outside the previous range.
Also, always do overlayT style scaling on the slow chart whenever it
treads.
Since it can be desirable to dynamically adjust inputs to the y-ranging
method (such as in the display loop when a chart is very zoomed in), this
adds such support through a new `yrange_kwargs: dict[Viz, dict]` which
replaces the `yrange` tuple we were passing through prior. Also, adjusts
the y-range margin back to the original 0.09 of the diff now that we can
support dynamic control.
If there is a common `PlotItem` used for a set of `Viz`/curves (on
a given view) we don't need to do overlay scaling and thus can also
short circuit the viz iteration loop early.
Somewhat of a facepalm but, for incremental update of the auto-yrange
from quotes in the display loop obviously we only want to update the
associated `Viz`/viewbox for *that* fqsn. Further we don't need to worry
about the whole "tick margin" stuff since `._set_yrange()` already adds
margin to the yrange by default; thus we remove all of that.
When the caller passes `do_overlay_scaling=False` we skip the given
chart's `Viz` iteration loop, and set the yrange immediately, then
continue to the next chart (if `do_linked_charts` is set) instead of
a `continue` short circuit within the viz sub-loop.
Deats:
- add a `_maybe_calc_yrange()` helper which makes the `yranges`
provided-or-not case logic more terse (factored).
- add a `do_linked_charts=False` short circuit.
- drop the legacy commented swing % calcs stuff.
- use the `ChartView._viz` when `do_overlay_scaling=False` thus
presuming that we want to handle the viz mapped to *this* view box.
- add a `._yrange` "last set yrange" tracking var which keeps record of
the last ymn/ymx value set in `._set_yrange()` BEFORE doing range
margins; this will be used for incremental update in the display loop.
Since each symbol's feed is multiplexed by quote key (an fqsn), we can
avoid scaling overlay curves on any single update, presuming each quote
driven cycle will trigger **only** the specific symbol's curve.
Also disables fsp `.interact_graphics_cycle()` calls for now since it
seems they aren't really that critical to and we should be using the
same technique as above (doing incremental y-range checks/updates) for
FSPs as well.
The reason (fsp) subcharts were not linked-updating correctly was
because of the early termination of the interact update loop when only
one "overlay" (aka no other overlays then the main curve) is detected.
Obviously in this case we still need to iterate all linked charts in the
set (presuming the user doesn't disable this).
Also tweaks a few internals:
- rename `start_datums: dict` -> `overlay_table`.
- compact all "single curve" checks to one logic block.
- don't collect curve info into the `overlay_table: dict` when
`do_overlay_scaling=True`.
Such that we still y-range auto-sort inside
`ChartView.interact_graphics_cycle()` still runs on the unit vlm axis
and we always size such that the y-label stays in view.
Since we pretty much always want the 'bottom' and any side that is not
declared by the caller move the axis hides into this method. Lets us
drop the same calls in `.ui._fsp` and `._display`.
This also disables the auto-ranging back-linking for now since it
doesn't seem to be working quite yet?
This was a subtle logic error when building the `plots: dict` we weren't
adding the "main (ohlc or other source) chart" from the `LinkedSplits`
set when interacting with some sub-chart from `.subplots`..
Further this tries out bypassing `numpy.median()` altogether by just
using `median = (ymx - ymn) / 2` which should be nearly the same?
In the (incrementally updated) display loop we have range logic that is
incrementally updated in real-time by streams, as such we don't really
need to update all linked chart's (for any given, currently updated
chart) y-ranges on calls of each separate (sub-)chart's
`ChartView.interact_graphics_cycle()`. In practise there are plenty of
cases where resizing in one chart (say the vlm fsps sub-plot) requires
a y-range re-calc but not in the OHLC price chart. Therefore
we always avoid doing more resizing then necessary despite it resulting
in potentially more method call overhead (which will later be justified
by better leveraging incrementally updated `Viz.maxmin()` and
`media_from_range()` calcs).
A super snappy `numpy.median()` calculator (per input range) which we
slap an `lru_cache` on thanks to handy dunder method hacks for such
things on mutable types XD
use the new `do_overlay_scaling: bool` since we know each feed will have
its own updates (cuz multiplexed by feed..) and we can avoid
ranging/scaling overlays that will make their own calls.
Also, pass in the last datum "brighter" color for ohlc curves as it was
originally (and now that we can pass that styling bit through).
Facepalm, obviously absolute array indexes are not going to necessarily
align vs. time over multiple feeds/history. Instead use
`np.searchsorted()` on whatever curve has the smallest support and find
the appropriate index of intersection in time so that alignment always
starts at a sensible reference.
Also adds a `debug_print: bool` input arg which can enable all the
prints when working on this.
We can determine the major curve (in view) in the first pass of all
`Viz`s so drop the 2nd loop and thus the `mxmn_groups: dict`. Also
simplifies logic for the case of only one (the major) curve in view.
Turns out this is a limitation of the `ViewBox.setYRange()` api: you
can't call it more then once and expect anything but the first call to
be applied without letting a render cycle run. As such, we wait until
the end of the log-linear scaling loop to finally apply the major curves
y-mx/mn after all minor curves have been evaluated.
This also drops all the debug prints (for now) to get a feel for latency
in production mode.
We ended up doing groups maxmin sorting at the interaction layer (new
the view box) and thus this method is no longer needed, though it was
the reference for the code now in `ChartView.interact_graphics_cycle()`.
Further this adds a `remove_axes: bool` arg to `.insert_plotitem()`
which can be used to drop axis entries from the inserted pi (though it
doesn't seem like we really ever need that?) and does the removal in
a separate loop to avoid removing axes before they are registered in
`ComposedGridLayout._pi2axes`.
When there are `N`-curves we need to consider the smallest
x-data-support subset when figuring out for each major-minor pair such
that the "shorter" series is always returns aligned to the longer one.
This makes the var naming more explicit with `major/minor_i_start` as
well as clarifies more stringently a bunch of other variables and
explicitly uses the `minor_y_intersect` y value in the scaling transform
calcs. Also fixes some debug prints.
In very close manner to the original (gut instinct) attempt, this
properly (y-axis-vertically) aligns and scales overlaid curves according
to what we are calling a "log-linearized y-range multi-plot" B)
The basic idea is that a simple returns measure (eg. `R = (p1 - p0)
/ p0`) applied to all curves gives a constant output `R` no matter the
price co-domain in use and thus gives a constant returns over all assets
in view styled scaling; a intuitive visual of returns correlation. The
reference point is for now the left-most point in view (or highest
common index available to all curves), though we can make this
a parameter based on user needs.
A slew of debug `print()`s are left in for now until we iron out the
remaining edge cases to do with re-scaling a major (dispersion) curve
based on a minor now requiring a larger log-linear y-range from that
previous major' range.
In the dispersion swing calcs, use the series median from the in-view
data to determine swing proportions to apply on each "minor curve"
(series with lesser dispersion the one with the greatest). Track the
major `Viz` as before by max dispersion. Apply the dispersion swing
proportions to each minor curve-series in a third loop/pass of all
overlay groups: this ensures all overlays are dispersion normalized in
their ranges but, minor curves are currently (vertically) centered (vs.
the major) via their medians.
There is a ton of commented code from attempts to try and vertically
align minor curves to the major via the "first datum" in-view/available.
This still needs work and we may want to offer it as optional.
Also adds logic to allow skipping margin adjustments in `._set_yrange()`
if you pass `range_margin=None`.
On overlaid ohlc vizs we compute the largest max/min spread and
apply that maxmimum "up and down swing" proportion to each `Viz`'s
viewbox in the group.
We obviously still need to clip to the shortest x-range so that
it doesn't look exactly the same as before XD
We were hacking this before using the whole `ChartView._maxmin()`
setting stuff since in some cases you might want similarly ranged paths
on the same view, but of course you need to max/min them together..
This adds that group sorting by using a table of `dict[PlotItem,
tuple[float, float]` and taking the abs highest/lowest value for each
plot in the viz interaction update loop.
Also removes the now commented signal registry calls and thus
`._yranger`, drops the `set_range: bool` from `._set_yrange` and adds
and extra `.maybe_downsample_graphics()` to the mouse wheel handler to
avoid a weird slow debounce where ds-ing is delayed until a further
interaction.
It's kind of hard to understand with the C++ fan-out to multiple views
(imo a cluster-f#$*&) and seems honestly just plain faster to loop (in
python) through all the linked view handlers XD
Core adjustments:
- make the panning and wheel-scroll handlers just call
`.maybe_downsample_graphics()` directly; drop all signal emissions.
- make `.maybe_downsample_graphics()` loop through all vizs per subchart
and use the new pipeline-style call sequence of:
- `Viz.update_graphics() -> <read_slc>: tuple`
- `Viz.maxmin(i_read_range=<read_slc>) -> yrange: tuple`
- `Viz.plot.vb._set_yrange(yrange=yrange)`
which inlines all the necessary calls in the most efficient way whilst
leveraging `.maxmin()` caching and ymxmn-from-m4-during-render to
boot.
- drop registering `._set_yrange()` for handling `.sigRangeChangedManually`.
Computes the maxmin values for each underlying plot's in-view range as
well as the max up/down swing (in percentage terms) from the plot with
most dispersion and returns a all these values plus a `dict` of plots to
their ranges as part of output.
This broke non-disti-mode actor tree spawn / runtime, seemingly because
the cli entrypoint for a `piker chart` also sends these values down
through the call stack independently? Pretty sure we don't need to send
the `enable_modules` from the chart actor anyway.
Curve-path colouring and cache mode settings are used (and can thus be
factored out of) all child types; this moves them into the parent type's
`.__init__()` and adjusts all sub-types match:
- the bulk was moved out of the `Curve.__init__()` including all
previous commentary around cache settings.
- adjust `BarItems` to use a `NoCache` mode and instead use the
`last_step_pen: pg.Pen` and `._pen` inside it's `.pain()` instead of
defining functionally duplicate vars.
- adjust all (transitive) calls to `BarItems` to use the new kwargs
names.
Allows callers to know if they should care about a particular viz
rendering call by immediately knowing if the graphics are in view. This
turns out super useful particularly when doing dynamic y-ranging overlay
calcs.
First, we rename what was `chart_maxmin()` -> `multi_maxmin()` and don't
`partial` it in to the `DisplayState`, just call it with correct `Viz`
ref inputs.
Second, as we've done with `ChartView.maybe_downsample_graphics()` use
the output from the main `Viz.update_graphics()` and feed it to the
`.maxmin()` calls for the ohlc and vlm chart but still deliver the same
output signature as prior. Also accept and use an optional profiler
input, drop `DisplayState.maxmin()` and add `.vlm_viz`.
Further perf related tweak to do with more efficient incremental
updates:
- only call `multi_maxmin()` if the main fast chart viz does a pixel
column step.
- mask out hist viz and vlm viz and all linked fsp `._set_yrange()`
calls for now until we figure out how to best optimize these updates
when considering the new group-scaled-by-% style for multicharts.
- drop `.enable_auto_yrange()` calls during startup.
Acts as short cut when pipe-lining from `Viz.update_graphics()` (which
now returns the needed in-view array-relative-read-slice as output) such
that `Viz.read()` and `.datums_range()` doesn't need to be called
internally multiple times. In this case where `i_read_range` is provided
we of course skip doing time index translations and consequently lookup
the appropriate (epoch-time) index indices for caching.
Removes the multi-maxmin usage as well as ensures appropriate `Viz` refs
are passed into the view methods now requiring it. Also drops the "back
linking" of the vlm chart view to the source OHLC chart since we're
going to add this as a default to the charting API.
The max min for a given data range is defined on the lowest level
through the `Viz` api intermingling it with the view is a layering
issue. Instead make `._set_yrange()` call the appropriate view's viz
(since they should be one-to-one) directly and thus avoid any callback
monkey patching nonsense.
Requires that we now make `._set_yrange()` require either one of an
explicit `yrange: tuple[float, float]` min/max pair or the `Viz` ref (so
that maxmin can be called) as input. Adjust
`enable/disable_auto_yrange()` to bind in a new `._yranger()` partial
that's (solely) needed for signal reg/unreg which binds in the now
required input `Viz` to these methods.
Comment the `autoscale_overlays` block in `.maybe_downsample_graphics()`
for now until we figure out the most sane way to auto-range all linked
overlays and subplots (with their own overlays).
In an effort to ensure uniform and uppx-optimized last datum graphics
updates call this method directly instead of the equivalent graphics
object thus ensuring we only update the last pixel column according with
the appropriate max/min computed from the last uppx's worth of data.
Fixes / improvements to enable `.draw_last()` usage include,
- change `Viz._render_table` -> `._alt_r: tuple[Renderer, pg.GraphicsItem] | None`
which holds an alternative (usually downsampled) render and graphics
obj.
- extend the `.draw_last()` signature to include:
- `last_read` to allow passing in the already read data from
`.update_graphics()`, if it isn't passed then a manual read is done
internally.
- `reset_cache: bool` which is passed through to the graphics obj.
- use the new `Formatter.flat_index_ratio: float` when indexing into xy
1d data to compute the max/min for that px column.
Other,
- drop `bars_range` input from `maxmin()` since it's unused.
When a new tick comes in but no new time step / bar is yet needed (to be
appended) we can simply adjust **only** the last bar datum
lines-graphic(s) to avoid a redraw of the preceding `QPainterPath` on
every tick. Do this by calling `Viz.draw_last()` on the fast and slow
chart and adjusting the guards around calls to `Viz.update_graphics()`
(which *does* update paths) to only enter when there's a `do_px_step`
condition. We can stop calling `main_viz.plot.vb._set_yrange()` on view
treading cases since the range should have already been adjusted by the
clearing-tick processing mxmn updates.
Further this changes,
- the `chart_maxmin()` helper (which we should eventually just get rid
of) to take bound in `Viz`s for the ohlc and vlm chart instead of the
chart widget handles.
- extend the guard around hist viz yranging to only enter when not in
"axis mode" - the same as for the fast viz.
Since we removed the `Viz.update_graphics()` call from the main rt loop
we have to be sure to call it in the history chart incr-loop to avoid
a gap between the last bar and prior history since startup. We only
need to update on tread since that should be the only time a full redraw
is ever necessary, ow only the last datum is needed.
Further this moves the graphics cycle func's profiler init to the top in
an effort to get more correct latency measures.
Since `ChartPlotWidget.update_graphics_from_flow()` is more or less just
a call to `Viz.update_graphics()` try to call that directly where
possible.
Changes include:
- calling the viz in the display state specific `maxmin()`.
- passing a viz instance to each `ChartView._set_yrange()` call (in prep
of explicit group auto-ranging); not that this input is unused in the
method for now.
- drop `bars_range` var passing since we don't use it.
Inside `._interaction` routines we need access to `Viz` instances.
Instead of doing `CharPlotWidget._vizs: dict` lookups this ensures each
plot can lookup it's (parent) viz without error.
Also, adjusts `Viz.maxmin()` output parsing to new signature.
Move the `Viz.datums_range()` call into `Viz.maxmin()` itself thus
minimizing the chart `.maxmin()` method to an ultra light wrapper around
the viz call. Also move all profiling into the `Viz` method.
Adjust `Viz.maxmin()` to return both the (rounded) x-range values which
correspond to the range containing the y-domain min and max so that
it can be used for up and coming overlay group maxmin calcs.
This should never really happen but when it does it appears to be a race
with writing startup pre-graphics-formatter array data where we get
`x_end` epoch value subtracting some really small offset value (like
`-/+0.5`) or the opposite where the `x_start` is epoch and `x_end` is
small.
This adds a warning msg and `breakpoint()` as well as guards around the
entire code downsampling code path so that when resumed the downsampling
cycle should just be skipped and avoid a crash.
This attempt was unsuccessful since trying to (re)select the last
highlighted item on both an "enter" or "click" of that item causes
a hang and then segfault in `Qt`; no clue why..
Adds a `keep_current_item_selected: bool` flag to
`CompleterView.show_cache_entries()` but using it seems to always cause
a hang and crash; we keep all potential use spots commented for now
obviously to avoid this. Also included is a bunch of tidying to logic
blocks in the kb-control loop for readability.
- adjust zoom focal to be min of the view-right coord or the right-most
point on the flow graphic in view and drop all the legacy l1-in-view
focal point cruft.
- flip to not auto-scaling overlays by default.
- change the `._set_yrange()` margin to `0.09`.
- drop `use_vr: bool` usage.
Before this axes were being stacked from the outside in (for `'right'`
and 'bottom'` axes) which is somewhat non-intuitive for an `.append()`
operation. As such this change makes a symbol list stack a set of
`'right'` axes from left-to-right.
Details:
- rename `ComposeGridLayout.items` -> `.pitems`
- return `(int, list[AxisItem])` pairs from `.insert/append_plotitem()`
and the down stream `PlotItemOverlay.add_plotitem()`.
- drop `PlotItemOverlay.overlays` and add it back as `@property` around
the underlying `.layout.pitems`.
Tyler Goodlet
Guillermo Rodriguez
goodboy