The (partial) fills from this sub are most indicative of clears (also
says support) whereas the msgs in the `ownTrades` sub are only emitted
after the entire order request has completed - there is no size-vlm
remaining.
Further enhancements:
- this also includes proper subscription-syncing inside `subscribe()` with
a small pre-msg-loop which waits on ack-msgs for each sub and raises any
errors. This approach should probably be implemented for the data feed
streams as well.
- configure the `ownTrades` sub to not bother sending historical data on
startup.
- make the `openOrders` sub include rate limit counters.
- handle the rare case where the ems is trying to cancel an order which
was just edited and hasn't yet had it's new `txid` registered.
Since we figured out how to pass through ems dialog ids to the
`openOrders` sub we don't really need to do much with status updates
other then error handling. This drops `process_status()` and moves the
error handling logic into a status handler sub-block; we now just
info-log status updates for troubleshooting purposes.
Why we need so many fields to accomplish passing through a dialog key to
orders is beyond me but this is how they do it with edits..
Allows not having to handle `editOrderStatus` msgs to update the dialog
key table and instead just do it in the `openOrders` sub by checking the
canceled msg for a 'cancel_reason' of 'Order replaced', in which case we
just pop the txid and wait for the new order the kraken backend engine
will submit automatically, which will now have the correct 'userref'
value we passed in via the `newuserref`, and then we add that new `txid`
to our table.
Turns out you can pass both thus making mapping an ems `oid` to
a brokerd-side `reqid` much more simple. This allows us to avoid keeping
as much local dialog state but with still the following caveats:
- ok `editOrder` msgs must update the reqid<->txid map
- only pop `reqids2txids` entries inside the `cancelOrderStatus` handler
If we don't have a pos table built out already (in mem) we can't figure
out the likely dst asset (since there's no pair entry to guide us) that
we should use to search for withdrawal transactions; so move it later.
Further this ports to the new api changes in `piker.pp`` that will land
with #365.
This ended up driving the rework of the `piker.pp` apis to use context
manager + table style which resulted in a much easier to follow
state/update system B). Also added is a flag to do a manual simulation
of a "fill triggered rt pp msg" which requires the user to delete the
last ledgered trade entry from config files and then allowing that trade
to emit through the `openOrders` sub and update client shortly after
order mode boot; this is how the rt updates were verified to work
without doing even more live orders 😂.
Patch details:
- open both `open_trade_ledger()` and `open_pps()` inside the trade
dialog startup and conduct a "pp state sync" logic phase where we now
pull the account balances and incrementally load pp data (in order,
from `pps.toml`, ledger, api) until we can generate the asset balance
by reverse incrementing through trade history eventually erroring out
if we can't reproduce the balance value.
- rework the `trade2pps()` to take in the `PpTable` and generate new
ems msgs from table updates.
- return the new `dict[str, Transaction]` expected from
`norm_trade_records()`
- only update pp config and ledger on dialog exit.
Since our ems doesn't actually do blocking style client-side submission
updates, thus resulting in the client being able to update an existing
order's state before knowing its current state, we can run into race
conditions where for some backends an order is updated using the wrong
order id. For kraken we manually implement detecting this race (lol, for
now anyway) such that when a new client side edit comes in before the
new `txid` is known, we simply expect the handler loop to cancel the
order. Further this adds cancellation on arbitrary status errors, like
rate limits.
Also this adds 2 leg (ems <-> brokerd <-> kraken) msg tracing using
a `collections.ChainMap` which is likely going to end up being the POC
for a more general data structure recommended for backends that need to
trace msg flow for translation with the ems.
Turns out the `openOrders` and `ownTrades` subs always return a `reqid`
value (the one brokerd sends to the kraken api in order requests) is
always set to zero, which seems to be a bug? So this includes patches to
work around that as well reliance on the `openOrders` sub to do most
`BrokerdStatus` updates since `XOrderStatus` events don't seem to have
much data in them at all (they almost look like pure ack events so maybe
they aren't affirmative of final state changes anyway..).
Other fixes:
- respond with a `BrokerdOrderAck` immediately after `requid` generation
not after order submission to ensure the ems has a valid `requid`
*before* kraken api events are relayed through.
- add a `reqids2txids: bidict[int, str]` which maps brokerd genned
`requid`s to kraken-side `txid`s since (as mentioned above) the
clearing and state endpoints don't relay back this value (it's always
0...)
- add log messages for each sub so that (at least for now) we can see
exact msg contents coming from kraken.
- drop `.remaining` calcs for now since we need to keep record of the
order states manually in order to retreive the original submission
vlm..
- fix the `openOrders` case for fills, in this case the message includes
no `status` field and thus we must catch it in a block *after* the
normal state handler to avoid masking.
- drop response msg generation from the cancel status case since we
can do it again from the `openOrders` handler and sending a double
status causes issues on the client side.
- add a shite ton of notes around all this missing `requid` stuff.
More or less just to avoid orders the user wasn't aware of from
persisting until we get "open order relaying" through the ems working.
Some further fixes which required a new `reqids2txids` map which keeps
track of which `kraken` "txid" is mapped to our `reqid: int`; mainly
this was needed for cancel requests which require knowing the underlying
`txid`s (since apparently kraken doesn't keep track of the "reqid" we
pass it). Pass the ws instance into `handle_order_updates()` to enable
the cancelling orders on startup. Don't key error on unknown `reqid`
values (for eg. when receiving historical trade events on startup).
Handle cancel requests first in the ems side loop.
Since we seem to always be able to get back the `reqid`/`userref` value
we send to kraken ws endpoints, we can use this as our brokerd side
order id and avoid all race cases with getting the true `txid` value
that `kraken` assigns (and which changes when you do "edits"
:eyeroll:). This simplifies status updates by allowing our relay loop
just to pass back our generated `.reqid` verbatim and allows responding
with a `BrokerdOrderAck` immediately in the request handler task which
should guarantee there are no further race conditions with the relay
loop and mapping `txid`s from kraken.. and figuring out wtf to do when
they change, etc.
Addressing same issue as in #350 where we need to compute position
updates using the *first read* from the ledger **before** we update it
to make sure `Position.lifo_update()` gets called and **not skipped**
because new trades were read as clears entries but haven't actually been
included in update calcs yet.. aka we call `Position.lifo_update()`.
Main change here is to convert `update_ledger()` into a context mngr so
that the ledger write is committed after pps updates using
`pp.update_pps_conf()`..
This is basically a hotfix to #346 as well.
Turns out the EMS can support this as originally expected: you can
update a `brokerd`-side `.reqid` through a `BrokerdAck` msg and the ems
which update its cross-dialog (leg) tracking correctly! The issue was
a bug in the `editOrderStatus` msg handling and appropriate tracking
of the correct `.oid` (ems uid) on the kraken side. This unfortunately
required adding a `emsflow: dict[str, list[BrokerdOrder]]` msg flow
tracing table which means the broker daemon is tracking all the msg flow
with the ems, though I'm wondering now if this is just good practise
anyway and maybe we should offer a small primitive type from our msging
utils to aid with this? I've used such constructs in event handling
systems prior.
There's a lot more factoring that can be done after these changes as
well but the quick detailed summary is,
- rework the `handle_order_requests()` loop to use `match:` syntax and
update the new `emsflow` table on every new request from the ems.
- fix the `editOrderStatus` case pattern to not include an error msg and
thus actually be triggered to respond to the ems with a `BrokerdAck`
containing the new `.reqid`, the new kraken side `txid`.
- skip any `openOrders` msgs which are detected as being kraken's
internal order "edits" by matching on the `cancel_reason` field.
- update the `emsflow` table in all ws-stream msg handling blocks
with responses sent to the ems.
Relates to #290
Move to using the websocket API for all order control ops and dropping
the sync rest api approach which resulted in a bunch of buggy races.
Further this gets us must faster (batch) order cancellation for free
and a simpler ems request handler loop. We now heavily leverage the new
py3.10 `match:` syntax for all kraken-side API msg parsing and
processing and handle both the `openOrders` and `ownTrades` subscription
streams.
We also block "order editing" (by immediate cancellation) for now since
the EMS isn't entirely yet equipped to handle brokerd side `.reqid`
changes (which is how kraken implements so called order "updates" or
"edits") for a given order-request dialog and we may want to even
consider just implementing "updates" ourselves via independent cancel
and submit requests? Definitely something to ponder. Alternatively we
can "masquerade" such updates behind the count-style `.oid` remapping we
had to implement anyway (kraken's limitation) and maybe everything will
just work?
Further details in this patch:
- create 2 tables for tracking the EMS's `.oid` (uui4) value to `int`s
that kraken expects (for `reqid`s): `ids` and `reqmsgs` which enable
local lookup of ems uids to piker-backend-client-side request ids and
received order messages.
- add `openOrders` sub support which more or less directly relays to
equivalent `BrokerdStatus` updates and calc the `.filled` and
`.remaining` values based on cleared vlm updates.
- add handler blocks for `[add/edit/cancel]OrderStatus` events including
error msg cases.
- don't do any order request response processing in
`handle_order_requests()` since responses are always received via one
(or both?) of the new ws subs: `ownTrades` and `openOrders` and thus
such msgs are now handled in the response relay loop.
Relates to #290Resolves#310, #296
This drops the use of `pp.update_pps_conf()` (and friends) and instead
moves to using the context style `open_trade_ledger()` and `open_pps()`
managers for faster pp msg gen due to delayed file writing (which was
the main source update latency).
In order to make this work with potentially multiple accounts this also
uses an exit stack which loads each ledger / `pps.toml` into an account
id mapped `dict`; a POC for likely how we should implement some higher
level position manager api.
Change `.find_contract()` -> `.find_contracts()` to allow multi-search
for so called "ambiguous" contracts (like for `Future`s) such that the
method now returns a `list` of tracts and populates the contract cache
with all specific tracts retrieved. Let it take in an (unvalidated)
contract that will be fqsn-style-tokenized such that it can be called
from `.search_symbols()` (though we're not quite yet XD).
More stuff,
- add `Client.parse_patt2fqsn()` which is an fqsn to token unpacker
built from the original logic in the old `.find_contract()`.
- handle fiat/forex pairs with the `'CASH'` sectype.
- add a flag to allow unqualified contracts to fail with a warning msg.
- populate the client's contract cache with all expiries of
an ambiguous derivative.
- allow `.con_deats()` to warn msg instead of raise on def-not-found.
- add commented `assert 0` which was triggering a debugger deadlock in
`tractor` which we still haven't been able to create a unit test for.
Not sure this didn't get caught in usage, but basically real-time
updates got broken by a rework of `update_ledger_from_api_trades()`.
The issue is that the ledger was being updated **before** calling
`piker.pp.update_pps_conf()` which resulted in the `Position.size`
not being updated correctly since the [latest added] clears passed
in via the `trade_records` arg were already found in the `.clears` table
and thus were causing the loop to skip the `Position.lifo_update()`
call..
The solution here is to not update the ledger **until after** we call
`update_pps_conf()` - it's more read/writes but it's correct and we
figure out a less io heavy way to do the file writing later.
Further this includes a fix to avoid double emitting a pp update caused
by non-thorough logic that waits for a commission report to arrive
during a fill event; previously we were emitting the same message twice
due to the lack of a check for an existing comms report in the case
where the report arrives *after* the fill.
Moves to using the new `piker.pp` apis to both store real-time trade
events in a ledger file as well emit position update msgs (which were
not in this backend at all prior) when new orders clear (aka fill).
In terms of outstanding issues,
- solves the pp update part of the bugs reported in #310
- starts a msg case block in prep for #293
Details of rework:
- move the `subscribe()` ws fixture to module level and `partial()` in
the client token instead of passing it to the instance; in prep for
removal of the `.token` attr from the `NoBsWs` wrapper.
- drop `make_auth_sub()` since it was too thin and we can just
do it all succinctly in `subscribe()`
- filter trade update msgs to those not yet stored int the toml ledger
- much better kraken api msg unpacking using new `match:` synax B)
Resolves#311
No real-time update support (yet) but this is the first draft at writing
trades ledgers and `pps.toml` entries for the kraken backend.
Deatz:
- drop `pack_positions()`, no longer used.
- use `piker.pp` apis to both write a trades ledger file and update the
`pps.toml` inside the `trades_dialogue()` endpoint startup.
- drop the weird paper engine swap over if auth can't be done, we should
be doing something with messaging in the ems over this..
- more web API error response raising.
- pass the `pp.Transaction` set loaded from ledger into
`process_trade_msgs()` do avoid duplicate sends of already collected
trades msgs.
- add `norm_trade_records()` public endpoing (used by `piker.pp` api)
and `update_ledger()` helper.
- rejig `process_trade_msgs()` to drop the weird `try:` assertion block
and skip already-recorded-in-ledger trade msgs as well as yield *each*
trade instead of sub-sequences.
Before we weren't emitting pp msgs when a position went back to "net
zero" (aka the size is zero) nor when a new one was opened (wasn't
previously loaded from the `pps.toml`). This reworks a bunch of the
incremental update logic as well as ports to the changes in the
`piker.pp` module:
- rename a few of the normalizing helpers to be more explicit.
- drop calling `pp.get_pps()` in the trades dialog task and instead
create msgs iteratively, per account, by iterating through collected
position and API trade records and calling instead
`pp.update_pps_conf()`.
- always from-ledger-update both positions reported from ib's pp sys and
session api trades detected on ems-trade-dialog startup.
- `update_ledger_from_api_trades()` now does **just** that: only updates
the trades ledger and returns the transaction set.
- `update_and_audit_msgs()` now only the input list of msgs and properly
generates new msgs for newly created positions that weren't previously
loaded from the `pps.toml`.
We can probably make this better (and with less file sys accesses) later
such that we keep a consistent pps state in mem and only write async
maybe from another side-task?
What a nightmare this was.. main holdup was that cost (commissions)
reports are fired independent from "fills" so you can't really emit
a proper full position update until they both arrive.
Deatz:
- move `push_tradesies()` and relay loop in `deliver_trade_events()` to
the new py3.10 `match:` syntax B)
- subscribe for, and handle `CommissionReport` events from `ib_insync`
and repack as a `cost` event type.
- handle cons with no primary/listing exchange (like futes) in
`update_ledger_from_api_trades()` by falling back to the plain
'exchange' field.
- drop reverse fqsn lookup from ib positions map; just use contract
lookup for api trade logs since we're already connected..
- make validation in `update_and_audit()` optional via flag.
- pass in the accounts def, ib pp msg table and the proxies table to the
trade event relay task-loop.
- add `emit_pp_update()` too encapsulate a full api trade entry
incremental update which calls into the `piker.pp` apis to,
- update the ledger
- update the pps.toml
- generate a new `BrokerdPosition` msg to send to the ems
- adjust trades relay loop to only emit pp updates when a cost report
arrives for the fill/execution by maintaining a small table per exec
id.
I don't want to rant too much any more since it's pretty clear `ib` has
either zero concern for its (api) user's or a severely terrible data
management team and/or general inter-team coordination system, but this
patch more or less hacks the flex report records to be similar enough to
API "execution" / "fill" records such that they can be similarly
normalized and stored as well as processed for position calculations..
Dirty deats,
- use the `IB.fills()` method for pulling current session trade events
since it's both recommended in the docs and does seem to capture
more extensive meta-data.
- add a `update_ledger_from_api()` helper which does all the insane work
of making sure api trade entries are usable both within piker's global
fqsn system but also compatible with incremental updates of positions
computed from trade ledgers derived from ib's "flex reports".
- add "auditting" of `ib`'s reported positioning API messages by
comparison with piker's new "traders first" breakeven price style and
complain via logging on mismatches.
- handle buy vs. sell arithmetic (via a +ve or -ve multiplier) to make
"size" arithmetic work for API trade entries..
- draft out options contract transaction parsing but skip in pps
generation for now.
- always use the "execution id" as ledger keys both in flex and api
trade processing.
- for whatever weird reason `ib_insync` doesn't include the so called
"primary exchange" in contracts reported in fill events, so do manual
contract lookups in such cases such that pps entries can be placed
in the right fqsn section...
Still ToDo:
- incremental update on trade clears / position updates
- pps audit from ledger depending on user config?
Since "flex reports" are only available for the current session's trades
the day after, this adds support for also collecting trade execution
records for the current session and writing them to the equivalent
ledger file.
Summary:
- add `trades_to_records()` to handle parsing both flex and API event
objects into a common record form.
- add `norm_trade_records()` to handle converting ledger entries into
`TradeRecord` types from the new `piker.pps` mod (coming in next
commit).
The single-file module was getting way out of hand size-wise with the
new flex report parsing stuff so this starts the process of breaking
things up into smaller modules oriented around trade, data, and ledger
related endpoints.
Add support for backends to declare sub-modules to enable in
a `__enable_modules__: list[str]` module var which is parsed by the
daemon spawning code passed to `tractor`'s `enable_modules: list[str]`
input.
Relates to the bug discovered in #310, this should avoid out-of-order
msgs which do not have a `.reqid` set to be error logged to console.
Further, add `pformat()` to kraken logging of ems msging.
Given that naming the port map is mostly pointless, since accounts can
be detected once the client connects, just expect a `brokers.toml` to
define a simple sequence of port numbers. Toss in a warning for using
the old map/`dict` style.
Now that we have working client auth thanks to:
https://github.com/barneygale/asyncvnc/pull/4 and related issue,
we can use a pw for the vnc server, though we should eventually
auto-generate a random one from a docker super obviously.
Add logic to the data reset hack loop to do a connection reset after
2 failed/timeout attempts at the regular data reset. We need to also add
this logic around reconnectionn events that are due to the host
network connection: aka roaming that's faster then timing logic
builtin to the gateway.
`ib-gw` seems particularly fragile to connections from clients with the
same id (can result in weird connect hangs and even crashes) and
`ib_insync` doesn't handle intermittent tcp disconnects that
well..(especially on dockerized IBC setups). This adds a bunch of
changes to our client caching and scan loop as well a proper
task-locking-to-cache-proxies so that,
- `asyncio`-side clients aren't double-loaded/connected even when
explicitly trying to reconnect repeatedly with a given client to work
around the unreliability of the `asyncio.Transport` design in
`ib_insync`.
- we can use `tractor.trionics.maybe_open_context()` to lock the `trio`
side from loading more then one `Client` on the `asyncio` side and
instead on cache hits only making a new `MethodProxy` around the
reused `asyncio`-side client (since each `trio` task needs its own
inter-task msg channel).
- a `finally:` block teardown on all clients loaded in the scan loop
avoids stale connections.
- the connect params are now exposed as named args to
`load_aio_clients()` can be easily controlled from caller code.
Oh, and we properly hooked up the internal `ib_insync` logging to our
own internal schema - makes it a lot easier to debug wtf is going on XD
In order to expose more `asyncio` powered `Client` methods to endpoint
task-code this adds a more extensive and layered set of `MethodProxy`
loading routines, in dependency order these are:
- `load_clients_for_trio()` a `tractor.to_asyncio.open_channel_from()`
entry-point factory for loading all scanned clients on the `asyncio` side
and delivering them over the inter-task channel to a `trio`-side task.
- `get_preferred_data_client()` a simple client instance loading routine
which reads from the users `brokers.toml -> `prefer_data_account:
list[str]` which must list account names, in priority order, that are
acceptable to be used as the main "data connection client" such that
only one of the detected clients is used for data (whereas the rest
are used only for order entry).
- `open_client_proxies()` which delivers the detected `Client` set
wrapped each in a `MethodProxy`.
- `open_data_client()` which directly delivers the preferred data client
as a proxy for `trio` tasks.
- update `open_client_method_proxy()` and `open_client_proxy` to require
an input `Client` instance.
Further impl details:
- add `MethodProxy._aio_ns` to ref the original `asyncio` side proxied instance
- add `Client.trades()` to pull executions from the last day/session
- load proxies inside `trades_dialogue` and use the new `.trades()`
method to try and pull a fill ledger for eventual correct pp price
calcs (pertains to #307)..
Expect each backend to deliver a `config: dict[str, Any]` which provides
concurrency controls to `trimeter`'s batch task scheduler such that
backends can define their own concurrency limits.
The dirty deats in this patch include handling history "gaps" where
a query returns a history-frame-result which spans more then the typical
frame size (in seconds). In such cases we reset the target frame index
(datetime index sequence implemented with a `pendulum.Period`) using
a generator protocol `.send()` such that the sequence can be dynamically
re-indexed starting at the new (possibly) pre-gap datetime. The new gap
logic also allows us to detect out of order frames easier and thus wait
for the next-in-order to arrive before making more requests.
As per https://github.com/erdewit/ib_insync/pull/454 the more correct
way to do this is with `.reqContractDetailsAsync()` which we wrap with
`Client.con_deats()` and which works just as well. Further drop all the
`dict`-ifying that was being done in that method and instead always
return `ContractDetails` object in an fqsn-like explicitly keyed `dict`.
ib has a throttle limit for "hft" bars but contained in here is some
hackery using ``xdotool`` to reset data farms auto-magically B)
This copies the working script into the ib backend mod as a routine and
now uses `trio.run_process()` and calls into it from the `get_bars()`
history retriever and then waits for "data re-established" events to be
received from the client before making more history queries.
TL;DR summary of changes:
- relay ib's "system status" events (like for data farm statuses)
as a new "event" msg that can be processed by registers of
`Client.inline_errors()` (though we should probably make a new
method for this).
- add `MethodProxy.status_event()` which allows a proxy user to register
for a particular "system event" (as mentioned above), which puts
a `trio.Event` entry in a small table can be set by an relay task if
there are any detected waiters.
- start a "msg relay task" when opening the method proxy which does
the event setting mentioned above in the background.
- drop the request error handling around the proxy creation, doesn't
seem necessary any more now that we have better error propagation from
`asyncio`.
- add event waiting logic around the data feed reset hackzorin.
- change the order relay task to only log system events for now (though
we need to do some better parsing/logic to get tws-external order
updates to work again..
Found an issue (that was predictably brushed aside XD) where the
`ib_insync.util.df()` helper was changing the timestamps on bars data to
be way off (probably a `pandas.Timestamp` timezone thing?).
Anyway, dropped all that (which will hopefully let us drop `pandas` as
a hard dep) and added a buncha timestamp checking as well as start/end
datetime return values using `pendulum` so that consumer code can know
which "slice" is output.
Also added some WIP code to work around "no history found" request
errors where instead now we try to increment backward another 200
seconds - not sure if this actually correct yet.
Make the throttle error propagate through to `trio` again by adding
`dict`-msg support between the two loops such that errors can be
re-raised on the `trio` side. This is all integrated into the
`MethoProxy` and accompanying result relay task.
Further fix a longer standing issue where sometimes the `ib_insync`
order entry method will raise a weird assertion error because it detects
some internal order-id state issue.. Just ignore those and make relay
back an error to the ems in such cases.
Add a bunch of notes for todos surrounding data feed reset hackery.
To start we only have futes working but this allows both searching
and loading multiple expiries of the same instrument by specifying
different expiries with a `.<expiry>` suffix in the symbol key (eg.
`mnq.globex.20220617`). This also paves the way for options contracts
which will need something similar plus a strike property. This change
set also required a patch to `ib_insync` to allow retrieving multiple
"ambiguous" contracts from the `IB.reqContractDetailsAcync()` method,
see https://github.com/erdewit/ib_insync/pull/454 for further discussion
since the approach here might change.
This patch also includes a lot of serious reworking of some `trio`-`asyncio`
integration to use the newer `tractor.to_asyncio.open_channel_from()`
api and use it (with a relay task) to open a persistent connection with
an in-actor `ib_insync` `Client` mostly for history requests.
Deats,
- annot the module with a `_infect_asyncio: bool` for `tractor` spawning
- add a futes venu list
- support ambiguous futes contracts lookups so that all expiries will
show in search
- support both continuous and specific expiry fute contract
qualification
- allow searching with "fqsn" keys
- don't crash on "data not found" errors in history requests
- move all quotes msg "topic-key" generation (which should now be
a broker-specific fqsn) and per-contract quote processing into
`normalize()`
- set the fqsn key in the symbol info init msg
- use `open_client_proxy()` in bars backfiller endpoint
- include expiry suffix in position update keys
This adds a new client manager-factory: `open_client_proxy()` which uses
the newer `tractor.to_asyncio.open_channel_from()` (and thus the
inter-loop-task-channel style) a `aio_client_method_relay()` and
a re-implemented `MethodProxy` wrapper to allow transparently calling
`asyncio` client methods from `trio` tasks. Use this proxy in the
history backfiller task and add a new (prototype)
`open_history_client()` which will be used in the new storage management
layer. Drop `get_client()` which was the portal wrapping equivalent of
the same proxy but with a one-task-per-call approach. Oh, and
`Client.bars()` can take `datetime`, so let's use it B)
Move the core ws message handling into `stream_messages()` and call that
from 2 new stream processors: `process_data_feed_msgs()` and
`process_order_msgs()`. Add comments for hints on how to implement the
order msg parsing as well as `pprint` received msgs to console for now.
Must have run into some confusion with data structures in `brokerd` vs.
`emsd`. This fixes the ems `relay.positions` state tracking to be
composed maps, vs. messages from `brokerd` should just be a sequence.
This adds full support for a single `brokerd` managing multiple API
endpoint clients in tandem. Get the client scan loop correct and load
accounts from all discovered clients as specified in a user's
`broker.toml`. We now just always re-scan for all clients and if there's
a cache hit just skip a creation/connection logic.
Route orders with an account name to the correct client in the
`handle_order_requests()` endpoint and spawn an event relay task per
client for transmitting trade events back to `emsd`.
Make the `handle_order_requests()` tasks now lookup the appropriate API
client for a given account (or error if it can't be found) and use it
for submission. Account names are loaded from the
`brokers.toml::accounts.ib` section both UI side and in the `brokerd`.
Change `_aio_get_client()` to a `load_aio_client()` which now tries to
scan and load api clients for all connections defined in the config as
well as deliver the client cache and account lookup tables.
This gives us fast search over a known set of symbols you can't search
for with the api such as futures and commodities contracts.
Toss in a new client method to lookup contract details
`Client.con_deats()` and avoid calling it for now from `.search_stock()`
for speed; it seems originally we were doing the 2nd lookup due to weird
suffixes in the `.primaryExchange` which we can just discard.
Obviously this only supports stocks to start, it looks like we might
actually have to hard code some of the futures/forex/cmdtys that don't
have a search.. so lame. Special throttling is added here since the api
will grog out at anything more then 1Hz.
Additionally, decouple the bar loading request error handling from the
shm pushing loop so that we can always recover from a historical bars
throttle-error even if it's on the first try for a new symbol.
This gets the binance provider meeting the data feed schema requirements
of both the OHLC sampling/charting machinery as well as proper
formatting of historical OHLC history.
Notably,
- spec a minimal ohlc dtype based on the kline endpoint
- use a dataclass to parse out OHLC bar datums and pack into np.ndarray/shm
- add the ``aggTrade`` endpoint to get last clearing (traded) prices,
validate with ``pydantic`` and then normalize these into our tick-quote
format for delivery over the feed stream api.
- a notable requirement is that the "first" quote from the feed must
contain a 'last` field so the clearing system can start up correctly.
Move all feed/stream agnostic logic and shared mem writing into a new
set of routines inside the ``data`` sub-package. This lets us move
toward a more standard API for broker and data backends to provide
cache-able persistent streams to client apps.
The data layer now takes care of
- starting a single background brokerd task to start a stream for as
symbol if none yet exists and register that stream for later lookups
- the existing broker backend actor is now always re-used if possible
if it can be found in a service tree
- synchronization with the brokerd stream's startup sequence is now
oriented around fast startup concurrency such that client code gets
a handle to historical data and quote schema as fast as possible
- historical data loading is delegated to the backend more formally by
starting a ``backfill_bars()`` task
- write shared mem in the brokerd task and only destruct it once requested
either from the parent actor or further clients
- fully de-duplicate stream data by using a dynamic pub-sub strategy
where new clients register for copies of the same quote set per symbol
This new API is entirely working with the IB backend; others will need
to be ported. That's to come shortly.
Async spawn a deats getter task whenever we load a symbol data feed.
Pass these symbol details in the first message delivered by the feed at
open. Move stream loop into a new func.
If you have a common broker feed daemon then likely you don't want to
create superfluous shared mem buffers for the same symbol. This adds an
ad hoc little context manger which keeps a bool state of whether
a buffer writer task currently is running in this process. Before we
were checking the shared array token cache and **not** clearing it when
the writer task exited, resulting in incorrect writer/loader logic on
the next entry..
Really, we need a better set of SC semantics around the shared mem stuff
presuming there's only ever one writer per shared buffer at given time.
Hopefully that will come soon!
- Move to new shared mem system only writing on the first (by process)
entry to `stream_quotes()`.
- Deliver bars before first quote arrives so that chart can populate and
then wait for initial arrival.
- Allow caching clients per actor.
- Load bars using the same (cached) client that starts the quote stream
thus speeding up initialization.
Adjust the `data.open_feed()` api to take a shm token so the
broker-daemon can attach a previously created (by the parent actor) mem
buf and push real-time tick data. There's still some sloppiness here in
terms of ensuring only one mem buf per symbol (can be seen in
`stream_quotes()`) which should really managed at the data api level.
Add a bar incrementing stream-task which delivers increment msgs to any
consumers.
Since the new FSP system will require time aligned data amongst actors,
it makes sense to share broker data feeds as much as possible on a local
system. There doesn't seem to be downside to this approach either since
if not fanning-out in our code, the broker (server) has to do it anyway
(and who knows how junk their implementation is) though with more
clients, sockets etc. in memory on our end. It also preps the code for
introducing a more "serious" pub-sub systems like zeromq/nanomessage.
Start a draft normalization format for (sampled) tick data.
Ideally we move toward the dense tick format (DFT) enforced by
techtonicDB, but for now let's just get a dict of something simple
going: `{'type': 'trade', 'price': <price}` kind of thing. This
gets us started being able to real-time chart from all data feed
back-ends. Oh, and hack in support for XAUUSD..and get subactor
logging workin.
Add a `Client.find_contract()` which internally takes
a <symbol>.<exchange> str as input and uses `IB.qualifyContractsAsync()`
internally to try and validate the most likely contract. Make the module
script call this using `asyncio.run()` for console testing.
Infected `asyncio` support is being added to `tractor` in
goodboy/tractor#121 so delegate to all that new machinery.
Start building out an "actor-aware" api which takes care of all the
`trio`-`asyncio` interaction for data streaming and request handling.
Add a little (shudder) method proxy system which can be used to invoke
client methods from another actor. Start on a streaming api in
preparation for real-time charting.
Start working towards meeting the backend client api.
Infect `asyncio` using `trio`'s new guest mode and demonstrate
real-time ticker streaming to console.
Since the new FSP system will require time aligned data amongst actors,
it makes sense to share broker data feeds as much as possible on a local
system. There doesn't seem to be downside to this approach either since
if not fanning-out in our code, the broker (server) has to do it anyway
(and who knows how junk their implementation is) though with more
clients, sockets etc. in memory on our end. It also preps the code for
introducing a more "serious" pub-sub systems like zeromq/nanomessage.
This is something I've been meaning to try for a while and will likely
make writing tick data to a db more straight forward (filling in NaN
values is more matter of fact) plus it should minimize bandwidth usage.
Note, it'll require stream consumers to be considerate of non-full
quotes arriving and thus using the first "full" quote message to fill
out dynamically formatted systems or displays.
For easy testing of questrade historical data from cli.
Re-org the common cli components into a new package to avoid having all
commands defined in a top-level module.
There's some expected limitations with the number of sticks allowed in
a single query (they say 2k but I've been able to pull 20k). Also note
without a paid data sub there's a 15m delay on 1m sticks (we'll hack
around that shortly, don't worry).
Gets us better throughput when polling multiple endpoints (eg. option
and stock quotes simultaneously) since slower round trip request won't
block faster ones when using multiple connections.
- stop displaying search bar widget on <ctrl-c>
- if there's existing search bar content highlight it automatically
to allow user to start typing new content right away
- when activated allow search bar to insert its own set of keybinding
controls; restore prior bindings on exit
Fixes to `tractor` that resolve issues with async generators being
non-task safe make the need for the mutex lock in
`DataFeed.open_stream()` unnecessary. Also, don't bother pushing empty
quotes from the publisher; avoids hitting the network when possible.
Questrade's API is half baked and can't handle concurrency.
It allows multiple concurrent requests to most endpoints *except*
for the auth endpoint used to refresh tokens:
https://www.questrade.com/api/documentation/security
I've gone through extensive dialogue with their API team and despite
making what I think are very good arguments for doing the request
serialization on the server side, they decided that I should instead
do the "locking" on the client side. Frankly it doesn't seem like they
have that competent an engineering department as it took me a long time
to explain the issue even though it's rather trivial and probably not
that hard to fix; maybe it's better this way.
This adds a few things to ensure more reliable token refreshes on
expiry:
- add a `@refresh_token_on_err` decorator which can be used on `_API`
methods that should refresh tokens on failure
- decorate most endpoints with this *except* for the auth ep
- add locking logic for the troublesome scenario as follows:
* every time a request is sent out set a "request in progress" event
variable that can be used to determine when no requests are currently
outstanding
* every time the auth end point is hit in order to refresh tokens set
an event that locks out other tasks from making requests
* only allow hitting the auth endpoint when there are no "requests in
progress" using the first event
* mutex all auth endpoint requests; there can only be one outstanding
- don't hit the accounts endpoint at client startup; we want to
eventually support keys from multiple accounts and you can disable
account info per key and just share the market data function
Adjust feed locking around internal manager `yields` to make this work.
Also, change quote publisher to deliver a list of quotes for each
retrieved batch. This was actually broken for option streaming since
each quote was being overwritten due to a common `key` value for all
expiries. Asjust the `packetizer` function accordingly to work for
both options and stocks.
The pub-sub data feed system was factored into `tractor` as an
experimental api / subsystem. Move to using that which greatly
simplifies the data feed architecture.
Start working toward a more general (on-demand) pub-sub system which
can be brought into ``tractor``. Right now this just means making
the code in the `fan_out_to_ctxs()` less specific but, eventually
I think this function should be coupled with a decorator and shipped
as a standard "message pattern".
Additionally,
- try out making `BrokerFeed` a `@dataclass`
- strip out all the `trio.Event` / uneeded nursery / extra task crap
from `start_quote_stream()`
If quotes are pushed using the adjusted contract symbol (i.e. with
trailing '-1' suffix) the subscriber won't receive them under the
normal symbol. The logic was wrong for determining whether to add
a suffix (was failing for any symbol with an exchange suffix)
which was causing normal data feed subscriptions to fail to match
in every case.
I did some testing of the `optionsIds` parameter to the option quote
endpoint and found that it limits you to 100 symbols so it's not
practical for real-time "all-strike"" chain updating; we have to stick
to filters for now. The only real downside of this is that it seems
multiple filters across multiple symbols is quite latent. I need to
toy with it more to be sure it's not something slow on the client side.
Oh, and store option contract to ids in a `dict` for now as we may want
to try the `optionsIds` thing again down the road as I coordinate with
the QT tech team.
Add some extra fields to each quote that QT should already be
providing (instead of hiding them in the symbol and request contract
info); namely, the expiry and contact type (i.e. put or call).
Define the base set of fields to be displayed in an option chain
UI and add a quote formatter.
Well that was a doozy; had to rejig pretty much all of it.
The deats:
- Track broker components in a new `DataFeed` namedtuple
- port to new list based batch quotes (not dicts any more)
- lock access to cached broker-client / data-feed instantiation
- respawn tasks that fail due to the network
So much changed to get this working for both stocks and options:
- Index contracts by a new `ContractsKey` named tuple
- Move to pushing lists of quotes instead of dicts since option
subscriptions are often not identified by their "symbol" key and
this makes it difficult at fan out time to know how a quote should
be indexed and delivered. Instead add a special `key` entry to each
quote dict which is the quote's subscription key.
Add a couple functions for storing and retrieving live json data feed
recordings to disk using a very rudimentary character + newline delimited
format.
Also, split out the pub-sub logic from `stream_quotes()` into a new
func, `fan_out_to_chans()`. Eventually I want to formalize this pattern
into a decorator exposed through `tractor`.
Makes it easy to request all the option contracts for a particular symbol.
Also, let `option_chain()` accept a `date` arg which can be used to only
retrieve quotes for a single expiry date (much faster then getting all
of them).
Drop all channel/connection handling from the core and break up all the
start up steps into compact and useful functions. The main difference is
the daemon now only needs to worry about spawning per broker streaming
tasks and handling symbol list subscription requests.
When a client loses a connection it will currently need to re-subscribe
for symbols and receive a symbol data summary as a first quote response.
Only run the provided coroutine on reconnect and call the kwarg
`on_reconnect`. The client consuming code is entirely expected at this
point to know how the symbol registration protocol works.
Event if a broker client is already spawned new clients should still
receive a detailed symbol data packet as the first response. Avoid
exposing the new client's queue to the broker (i.e. subscribing it for
quotes) until after first pushing this packet with all bad symbols
filtered out.
Oh boy where to start.
- Handle broken streams in the `StreamQueue` gracefully; terminate the
async generator.
- When a stream queue connection is unwritable discard its subscriptions
inside the quoter task
- If all subscriptions are discarded for a broker then tear down its
quoter task
- Use listener parent nursery for spawning quoter tasks
- Make broker subs data structures global/shared between conn
handler tasks
- Register the `tickers2qs` entry *after* instantiating broker client(s)
(avoids race condition when mulitple client connections are coming
online simultaneously)
- Push smoke quotes to every client not just the first that connects
- Track quoter tasks in a cross-task set
- Handle unsubscriptions more correctly
Tyler Goodlet
goodboy
Konstantine Tsafatinos
wattygetlood
Guillermo Rodriguez
Tyler Goodlet
goodboy