Commit Graph

2340 Commits (ib_checker_hackz)

Author SHA1 Message Date
Tyler Goodlet 558d2564c5 Only pass `is_brokercheck: bool` to endpoints that declare it 2022-06-06 16:39:14 -04:00
Tyler Goodlet 6feef5f1d9 Hack client check for `ib` using flag 2022-06-06 16:39:12 -04:00
Tyler Goodlet d641f77a80 Adjust checker to not require client methods, add `trades_dialogue()` endpoint 2022-06-06 16:37:44 -04:00
Guillermo Rodriguez d5ffad01b7
Introduce piker protocol in stream_messages 2022-06-06 15:59:36 -03:00
Guillermo Rodriguez 54e989320d
Brokermod check output fixed and tweaks to deribit Client.bars function 2022-06-06 15:59:36 -03:00
Guillermo Rodriguez 8f338b334a
Add brokercheck test and got deribit to dump l1 and trades to console 2022-06-06 15:59:36 -03:00
Guillermo Rodriguez f970b7c563
Initial deribit mock up 2022-06-06 15:59:36 -03:00
goodboy f6b54f02c0
Merge pull request #302 from pikers/incremental_update_paths
Incremental update paths
2022-06-06 10:39:58 -04:00
Tyler Goodlet 44c242a794 Fill in label with pairs from `status` value of backend init msg 2022-06-05 22:14:32 -04:00
Tyler Goodlet 99965e7601 Only draw mx/mn line for last uppx's worth of datums
When using m4, we downsample to the max and min of each
pixel-column's-worth of data thus preserving range / dispersion details
whilst not drawing more graphics then can be displayed by the available
amount of horizontal pixels.

Take and apply this exact same concept to the "last datum" graphics
elements for any `Flow` that is reported as being in a downsampled
state:

- take the xy output from the `Curve.draw_last_datum()`,
- slice out all data that fits in the last pixel's worth of x-range
  by using the uppx,
- compute the highest and lowest value from that data,
- draw a singe line segment which spans this yrange thus creating
  a simple vertical set of pixels which are "filled in" and show the
  entire y-range for the most recent data "contained with that pixel".
2022-06-05 22:13:36 -04:00
Tyler Goodlet e5f96391e3 Return xy data from `Curve.draw_last_datum()` methods 2022-06-05 22:13:36 -04:00
Tyler Goodlet a66934a49d Add `Curve` sub-types with new custom graphics API
Instead of using a bunch of internal logic to modify low level paint-able
elements create a `Curve` lineage that allows for graphics "style"
customization via a small set of public methods:
- `Curve.declare_paintables()` to allow setup of state/elements to be
  drawn in later methods.
- `.sub_paint()` to allow painting additional elements along with the
  defaults.
- `.sub_br()` to customize the `.boundingRect()` dimensions.
- `.draw_last_datum()` which is expected to produce the paintable
  elements which will show the last datum in view.

Introduce the new sub-types and load as necessary in
`ChartPlotWidget.draw_curve()`:
- `FlattenedOHLC`
- `StepCurve`

Reimplement all `.draw_last()` routines as a `Curve` method
and call it the same way from `Flow.update_graphics()`
2022-06-05 22:13:36 -04:00
Tyler Goodlet 55772efb34 Bleh, try avoiding the too many files bug-thing.. 2022-06-05 22:13:36 -04:00
Tyler Goodlet 736178adfd Rename `FastAppendCurve` -> `Curve` 2022-06-05 22:13:36 -04:00
Tyler Goodlet d770867163 Drop width arg to bar lines factory 2022-06-05 22:13:36 -04:00
Tyler Goodlet c518553aa9 Add new curve doc string 2022-06-05 22:13:36 -04:00
Tyler Goodlet 4138cef512 Drop old state from `BarsItems` 2022-06-05 22:13:36 -04:00
Tyler Goodlet 0f4bfcdf22 Drop global pg settings 2022-06-05 22:13:36 -04:00
Tyler Goodlet 80835d4e04 More detailed rt feed drop logging 2022-06-05 22:13:36 -04:00
Tyler Goodlet e6d03ba97f Add missing f-str prefix 2022-06-05 22:13:36 -04:00
Tyler Goodlet b71e8c5e6d Guard against empty source history slice output 2022-06-05 22:13:36 -04:00
Tyler Goodlet 064d185395 Drop pointless geo call from `.pain()` 2022-06-05 22:13:36 -04:00
Tyler Goodlet 363ba8f9ae Only drop throttle feeds if channel disconnects? 2022-06-05 22:13:36 -04:00
Tyler Goodlet fc24f5efd1 Iterate 1s and 1m from tsdb series 2022-06-05 22:13:36 -04:00
Tyler Goodlet a7ff47158b Pass tsdb flag when db is up XD 2022-06-05 22:13:36 -04:00
Tyler Goodlet 57acc3bd29 Factor all per graphic `.draw_last()` methods into closures 2022-06-05 22:13:36 -04:00
Tyler Goodlet 8f1faf97ee Add todo for bars range reuse in interaction handler 2022-06-05 22:13:36 -04:00
Tyler Goodlet 3ab91deaec Drop all (old) unused state instance vars 2022-06-05 22:13:36 -04:00
Tyler Goodlet 6f00617bd3 Only do new "datum append" when visible in pixels
The basic logic is now this:
- when zooming out, uppx (units per pixel in x) can be >= 1
- if the uppx is `n` then the next pixel in view becomes occupied by
  a new datum-x-coordinate-value when the diff between the last
  datum step (since the last such update) is greater then the
  current uppx -> `datums_diff >= n`
- if we're less then some constant uppx we just always update (because
  it's not costly enough and we're not downsampling.

More or less this just avoids unnecessary real-time updates to flow
graphics until they would actually be noticeable via the next pixel
column on screen.
2022-06-05 22:13:36 -04:00
Tyler Goodlet 2c2c453932 Reset line graphics on downsample step..
This was a bit of a nightmare to figure out but, it seems that the
coordinate caching system will really be a dick (like the nickname for
richard for you serious types) about leaving stale graphics if we don't
reset the cache on downsample full-redraw updates...Sooo, instead we do
this manual reset to avoid such artifacts and consequently (for now)
return a `reset: bool` flag in the return tuple from `Renderer.render()`
to indicate as such.

Some further shite:
- move the step mode `.draw_last()` equivalent graphics updates down
  with the rest..
- drop some superfluous `should_redraw` logic from
  `Renderer.render()` and compound it in the full path redraw block.
2022-06-05 22:13:36 -04:00
Tyler Goodlet 360643b32f Fix optional input `bars_range` type to match `Flow.datums_range()` 2022-06-05 22:13:36 -04:00
Tyler Goodlet ab0def22c1 Change flag name to `autoscale_overlays` 2022-06-05 22:13:36 -04:00
Tyler Goodlet a9ec1a97dd Vlm "rate" fsps, change maxmin callback name to include `multi_` 2022-06-05 22:13:36 -04:00
Tyler Goodlet d61b636487 Auto-yrange overlays in interaction (downsampler) handler 2022-06-05 22:13:36 -04:00
Tyler Goodlet 88ac2fda52 Aggretate cache resetting into a single ctx mngr method 2022-06-05 22:13:36 -04:00
Tyler Goodlet 08c83afa90 Rejig config helpers for arbitrary named files 2022-06-05 22:13:36 -04:00
Tyler Goodlet 066b8df619 Implement OHLC downsampled curve via renderer, drop old bypass code 2022-06-05 22:13:36 -04:00
Tyler Goodlet d4f31f2b3c Move update-state-vars defaults above step mode block 2022-06-05 22:13:36 -04:00
Tyler Goodlet 04897fd402 Implement pre-graphics format incremental update
Adds a new pre-graphics data-format callback incremental update api to
our `Renderer`. `Renderer` instance can now overload these custom routines:

- `.update_xy()` a routine which accepts the latest [pre/a]pended data
  sliced out from shm and returns it in a format suitable to store in
  the optional `.[x/y]_data` arrays.
- `.allocate_xy()` which initially does the work of pre-allocating the
   `.[x/y]_data` arrays based on the source shm sizing such that new
   data can be filled in (to memory).
- `._xy_[first/last]: int` attrs to track index diffs between src shm
  and the xy format data updates.

Implement the step curve data format with 3 super simple routines:
- `.allocate_xy()` -> `._pathops.to_step_format()`
- `.update_xy()` -> `._flows.update_step_xy()`
- `.format_xy()` -> `._flows.step_to_xy()`

Further, adjust `._pathops.gen_ohlc_qpath()` to adhere to the new
call signature.
2022-06-05 22:13:36 -04:00
Tyler Goodlet 42572d3808 Add back linked plots/views y-range autoscaling 2022-06-05 22:13:36 -04:00
Tyler Goodlet 8ce7e99210 Drop prints 2022-06-05 22:13:36 -04:00
Tyler Goodlet 1b38628b09 Handle teardown race, add comment about shm subdirs 2022-06-05 22:13:36 -04:00
Tyler Goodlet bbe1ff19ef Don't kill all containers on teardown XD 2022-06-05 22:13:36 -04:00
Tyler Goodlet eca2401ab5 Lul, well that heigh did not work.. 2022-06-05 22:13:36 -04:00
Tyler Goodlet 5d91516b41 Drop step mode "last datum" graphics creation from `.draw_last()`
We're doing this in `Flow.update_graphics()` atm and probably are going
to in general want custom graphics objects for all the diff curve / path
types. The new flows work seems to fix the bounding rect width calcs to
not require the ad-hoc extra `+ 1` in the step mode case; before it was
always a bit hacky anyway. This also tries to add a more correct
bounding rect adjustment for the `._last_line` segment.
2022-06-05 22:13:36 -04:00
Tyler Goodlet b985b48eb3 Add `._last_bar_lines` guard to `.paint()` 2022-06-05 22:13:36 -04:00
Tyler Goodlet c256d3bdc0 Type annot name in put to log routine 2022-06-05 22:13:36 -04:00
Tyler Goodlet f5de361f49 Import directly from `tractor.trionics` 2022-06-05 22:13:35 -04:00
Tyler Goodlet 432d4545c2 Fix last values, must be pulled from source data in step mode 2022-06-05 22:13:08 -04:00
Tyler Goodlet fa30df36ba Simplify default xy formatter 2022-06-05 22:13:08 -04:00