EventFD class now expects the fd to already be init with open_eventfd
RingBuff Sender and Receiver fully manage SharedMemory and EventFD lifecycles, no aditional ctx mngrs needed
Separate ring buf tests into its own test bed
Add parametrization to test and cancellation
Add docstrings
Add simple testing data gen module .samples
Demonstrates fixed size frame-oriented reads by the child where the
parent only transmits a "read" stream msg on "frame fill events" such
that the child incrementally reads the shm list data (much like in
a real-time-buffered streaming system).
I must have had a local touched file but never committed or something?
Seems that new `pytest` requires a top level `tests` pkg in order for
relative `.conftest` imports to work.
Muchas grax to @guilledk for finding the first issue which kicked of
this further scrutiny of the `tractor.Context` and `MsgStream` semantics
test suite with a strange edge case where,
- if the parent opened and immediately closed a stream while the remote
child task started and continued (without terminating) to send msgs
the parent's `open_context().__aexit__()` would **not block** on the
child to complete!
=> this was seemingly due to a bug discovered inside the
`.msg._ops.drain_to_final_msg()` stream handling case logic where we
are NOT checking if `Context._stream` is non-`None`!
As such this,
- extends the `test_caller_closes_ctx_after_callee_opens_stream` (now
renamed, see below) to include cases for all combinations of the child
and parent sending before receiving on the stream as well as all
placements of `Context.cancel()` in the parent before, around and after
the stream open.
- uses the new `expect_ctxc()` for expecting the taskc (`trio.Task`
cancelled)` cases.
- also extends the `test_callee_closes_ctx_after_stream_open` (also
renamed) to include the case where the parent sends a msg before it
receives.
=> this case has unveiled yet-another-bug where somehow the underlying
`MsgStream._rx_chan: trio.ReceiveMemoryChannel` is allowing the
child's `Return[None]` msg be consumed and NOT in a place where it is
correctly set as `Context._result` resulting in the parent hanging
forever inside `._ops.drain_to_final_msg()`..
Alongside,
- start renaming using the new "remote-task-peer-side" semantics
throughout the test module: "caller" -> "parent", "callee" -> "child".
Namely that `add_hooks: bool` should be the same as on the rent side..
Also, just drop the now unused `iter_maybe_sends`.
This makes the suite entire greeeeen btw, including the new sub-suite
which i hadn't runt before Bo
Namely renaming and massively simplifying it to a new
`test_ext_types_over_ipc` which avoids all the wacky "parent dictates
what sender should be able to send beforehand"..
Instead keep it simple and just always try to send the same small set of
types over the wire with expect-logic to handle each case,
- use the new `dec_hook`/`ext_types` args to `mk_[co]dec()` routines for
pld-spec ipc transport.
- always try to stream a small set of types from the child with logic to
handle the cases expected to error.
Other,
- draft a `test_pld_limiting_usage` to check runtime raising of bad API
usage; haven't run it yet tho.
- move `test_custom_extension_types` to top of mod so that the
`enc/dec_nsp()` hooks can be reffed from test parametrizations.
- comment out (and maybe remove) the old routines for
`iter_maybe_sends`, `test_limit_msgspec`, `chk_pld_type`.
XXX TODO, turns out the 2 failing cases from this suite have exposed an
an actual bug with `MsgTypeError` unpacking where the `ipc_msg=` input
is being set to `None` ?? -> see the comment at the bottom of
`._exceptions._mk_recv_mte()` which seems to describe the likely
culprit?
By using our new `PldRx` design we can,
- pass through the pld-spec & a `dec_hook()` to our `MsgDec` which is
used to configure the underlying `.dec: msgspec.msgpack.Decoder`
- pass through a `enc_hook()` to `mk_codec()` and use it to conf the
equiv `MsgCodec.enc` such that sent msg-plds are converted prior
to transport.
The trick ended up being just to always union the `mk_dec()`
extension-types spec with the normaly with the `msgspec.Raw` pld-spec
such that the `dec_hook()` is only invoked for payload types tagged
by the encoder/sender side B)
A variety of impl tweaks to make it all happen as well as various
cleanups in the `.msg._codec` mod include,
- `mk_dec()` no defaul `spec` arg, better doc string, accept the new
`ext_types` arg, doing the union of that with `msgspec.Raw`.
- proto-ed a now unused `mk_boxed_ext_struct()` which will likely get
removed since it ended up that our `PayloadMsg` structs already cover
the ext-type-hook requirement that the decoder is passed
a `.type=msgspec.Struct` of some sort in order for `.dec_hook` to be
used.
- add a `unpack_spec_types()` util fn for getting the `set[Type]` from
from a `Union[Type]` annotation instance.
- mk the default `mk_codec(pc_pld_spec = Raw,)` since the `PldRx` design
was already passing/overriding it and it doesn't make much sense to
use `Any` anymore for the same reason; it will cause various `Context`
apis to now break.
|_ also accept a `enc_hook()` and `ext_types` which are used to maybe
config the `.msgpack.Encoder`
- generally tweak a bunch of comments-as-docs and todos namely the ones
that are completed after the pld-rx design was implemented.
Also,
- mask the non-functioning `'defstruct'` approach `inside
`.msg.types.mk_msg_spec()` to prep for its removal.
Adjust the test suite (rn called `test_caps_based_msging`),
- add a new suite `test_custom_extension_types` and move and
use the `enc/dec_nsp()` hooks to the mod level for its use.
- prolly planning to drop the `test_limit_msgspec` suite since it's
mostly replaced by the `test_pldrx_limiting` mod's version?
- originally was tweaking a bunch in `test_codec_hooks_mod` but likely
it will get mostly rewritten to be simpler and simply verify that
ext-typed fields can be used over IPC `Context`s between actors (as
originally intended for this sub-suite).
Namely the `tractor.pause_from_sync()` examples using both bg threads
and `asyncio` which seem to go into bad states where SIGINT is ignored..
Deats,
- add `maybe_expect_timeout()` cm to ensure the EOF hangs get
`.xfail()`ed instead.
- @pytest.mark.ctlcs_bish` `test_pause_from_sync` and don't expect the
greenback prompt msg.
- also mark `test_sync_pause_from_aio_task`.
Seems that on 3.13 it's not showing our script code in the output now?
Gotta get an example for @oremanj to see what's up but really it'd be
nice to just custom format stuff above `trio`'s runtime by def..
Anyway, update the `.devx._stackscope`,
- log formatting to be a little more "sclangy" lookin.
- change the per-actor "delimiter" lines style.
- report the `signal.getsignal(SIGINT)` which i needed in the
`sync_bp.py` with ctl-c causing a hang..
- mask the `_tree_dumped` duplicator log report as well as the "dumped
fine" one.
- add an example `pkill --signal SIGUSR1` cmdline.
Tweak the test to cope with,
- not showing our script lines now.. which i've commented in the
`assert_before()` patts..
- to expect the newly formatted delimiter (ascii) lines to separate the
root vs. hanger sub-actor sections.
That is whenever `trio.EndOfChannel` is raised (presumably from the
`._to_trio.receive()` call inside `LinkedTaskChannel.receive()`) we need
to be extra certain that we let it bubble upward transparently DESPITE
special exc-as-signal handling that is normally suppressed from the aio
side; REPEAT we want to ALWAYS bubble any `trio_err ==
trio.EndOfChannel` in the `finally:` handler of `translate_aio_errors()`
despite `chan._trio_to_raise == AsyncioTaskExited` such that the
caller's iterable machinery will operate as normal when the inter-task
stream is stopped (again, presumably by the aio side task terminating
the inter-task stream).
Main impl deats for this,
- in the EoC handler block ensure we assign both `chan._trio_err` and
the local `trio_err` as well as continue to re-raise.
- add a case to the match block in the `finally:` handler which FOR SURE
re-raises any `type(trio_err) is EndOfChannel`!
Additionally fix a bad bug,
- a ref bug where we were NOT using the
`except BaseException as _trio_err` to assign to `chan._trio_err` (by
accident was missing the leading `_`..)
Unrelated impl tweak,
- move all `maybe_raise_aio_side_err()` content back to inline with its
parent func - makes it easier to use `tractor.pause()` mostly Bp
- go back to trying to use `aio_task.set_exception(aio_taskc)` for now
even though i'm pretty sure we're going to move to a try-fute-first
style helper for this in the future.
Adjust some tests to match/mk-them-green,
- break from `aio_echo_server()` recv loop on
`to_asyncio.TrioTaskExited` much like how you'd expect to (implicitly
with a `for`) with a `trio.EndOfChannel`.
- toss in a masked `value is None` pause point i needed for debugging
inf looping caused by not re-raising EoCs per the main patch
description.
- add a debug-mode sized delay to root-infected test.
Including changes like,
- loose eg flagging in various test emedded `trio.open_nursery()`s.
- changes to eg handling (like using `except*`).
- added `debug_mode` integration to tests that needed some REPLin
in order to figure out appropriate updates.
Such that any combination of task terminations/exits can be explicitly
handled and "dual side independent" crash cases re-raised in egs.
The main error-or-exit impl changes include,
- use of new per-side "signaling exceptions":
- TrioTaskExited|TrioCancelled for signalling aio.
- AsyncioTaskExited|AsyncioCancelled for signalling trio.
- NOT overloading the `LinkedTaskChannel._trio/aio_err` fields for
err-as-signal relay and instead add a new pair of
`._trio/aio_to_raise` maybe-exc-attrs which allow each side's
task to specify what it would want the other side to raise to signal
its/a termination outcome:
- `._trio_to_raise: AsyncioTaskExited|AsyncioCancelled` to signal,
|_ the aio task having returned while the trio side was still reading
from the `asyncio.Queue` or is just not `.done()`.
|_ the aio task being self or trio-request cancelled where
a `asyncio.CancelledError` is raised and caught but NOT relayed
as is back to trio; instead signal a "more explicit" exc type.
- `._aio_to_raise: TrioTaskExited|TrioCancelled` to signal,
|_ the trio task having returned while the aio side was still reading
from the mem chan and indicating that the trio side might not
care any more about future streamed values (like the
`Stop/EndOfChannel` equivs for ipc `Context`s).
|_ when the trio task canceld we do
a `asyncio.Future.set_exception(TrioTaskExited())` to indicate
to the aio side verbosely that it should cancel due to the trio
parent.
- `_aio/trio_err` are now left to only capturing the **actual**
per-side task excs for introspection / other side's handling logic.
- supporting "graceful exits" depending on API in use from
`translate_aio_errors()` such that if either side exits but the other
side isn't expect to consume the final `return`ed value, we just exit
silently, which required:
- adding a `suppress_graceful_exits: bool` flag.
- adjusting the `maybe_raise_aio_side_err()` logic to use that flag
and suppress only on certain combos of `._trio_to_raise/._trio_err`.
- prefer to raise `._trio_to_raise` when the aio-side is the src and
vice versa.
- filling out pedantic logging for cancellation cases indicating which
side is the cause.
- add a `LinkedTaskChannel._aio_result` modelled after our
`Context._result` a a similar `.wait_for_result()` interface which
allows maybe accessing the aio task's final return value if desired
when using the `open_channel_from()` API.
- rename `cancel_trio()` done handler -> `signal_trio_when_done()`
Also some fairly major test suite updates,
- add a `delay: int` producing fixture which delivers a much larger
timeout whenever `debug_mode` is set so that the REPL can be used
without a surrounding cancel firing.
- add a new `test_aio_exits_early_relays_AsyncioTaskExited` including
a paired `exit_early: bool` flag to `push_from_aio_task()`.
- adjust `test_trio_closes_early_causes_aio_checkpoint_raise` to expect
a `to_asyncio.TrioTaskExited`.
Since there's no way to activate `greenback`'s portal in such cases, we
should at least have a test verifying our very loud error about the
inability to support this usage..
Might as well break apart the specific test set since there are some
(minor) subtleties and the orig test mod is already getting pretty big
XD
Includes both the new "independent"-event-loops test as well as the std
usage base case suite.
Such that the suite verifies the wip `maybe_raise_from_masking_exc()`
will raise from a `trio.Cancelled.__context__` since I can't think of
any reason a `Cancelled` should ever be raised in-place of
a non-`Cancelled` XD
Not sure what should be raised instead (or maybe just a `log.warning()`
emitted?) but this starts a draft for refinement at the least. Use the
new `@pytest.mark.parametrize` explicit tuple-of-params form with an
`pytest.param + `.mark.xfail()` for the default behaviour case.
Since i wasted 2 days just to find an example of this inside an `@acm`,
figured I better reproduce for the purposes of maybe implementing
a warning sys (inside our wip proto `open_taskman()`) when a nursery
detects a single `Cancelled` in an eg where the `.__context__` is set to
some non-cancel error (which likely means a cancel-causing source
exception was suppressed by accident).
Left in a buncha commented code using `maybe_open_nursery()` which
i thought might be part of the issue but didn't end up being required;
will likely remove on a follow up refinement.
Trying to replicate cases where errors are raised in both `trio` and
`asyncio` tasks independently (at least in `.to_asyncio` API terms) with
a new `test_trio_prestarted_task_bubbles` that generates 3 cases inside
a `@acm` calls stack composing a `trio.Nursery` with
a `to_asyncio.open_channel_from()` call where a set of `trio` tasks are
started in a loop using `.start()` with various exc raising sequences,
- the aio task raising *before* the last `trio` task spawns.
- the aio task raising just after the last trio task spawns, but before
it starts.
- after the last trio task `.start()` call returns control to the
parent - but (for now) did not error.
TODO, still more cases to discover as i'm still fighting a `modden` bug
of this sort atm..
Other,
- tweak some other tests to have timeouts since some recent hangs were
found..
- started mucking with py3.13 and thus adjustments for strict egs in
some tests; full patchset to test suite likely coming soon!
Such that you can use,
```python
tractor.to_asyncio.run_as_asyncio_guest(
trio_main=_trio_main,
)
```
to boostrap the root actor (and thus main parent process) to embed
the actor-rumtime into an `asyncio` loop. Prove it all works with an
subactor-free version of the aio echo-server test suite B)
Ensuring we can at least use `breakpoint()` from an infected actor's
`asyncio.Task` spawned via a `.to_asyncio` API.
Also includes a little `tests/devx/` reorging,
- start splitting out non-`tractor.pause()` tests into a new
`test_pause_from_non_trio.py` for all the `.pause_from_sync()`
use in bg-threaded or `asyncio` applications.
- factor harness commonalities to the `devx/conftest` (namely
the `do_ctlc()` masher).
- mv `test_pause_from_sync` to the new non`-trio` mod.
NOTE, the `ctlc=True` is still failing for
`test_pause_from_asyncio_task` which is a user-happiness bug but not
anything fundamentally broken - just need to handle the `asyncio` case
in `.devx._debug.sigint_shield()`!
It was expecting `AssertionError` as a proceed-in-test signal (by
breaking from a continue loop), but `in_prompt_msg(raise_on_err=True)`
was changed to raise `ValueError`; so instead just use as a predicate
for the `break`.
Also rework `in_prompt_msg()` to accept the `child: BaseSpawn` as input
instead of `before: str` remove the casting boilerplate, and adjust all
usage to match.
The reason for this "duplication" with the `--asyncio` CLI flag (passed
to the child during spawn) is 2-fold:
- allows verifying inside `Actor._from_parent()` that the `trio` runtime was
started via `.start_guest_run()` as well as if the
`Actor._infected_aio` spawn-entrypoint value has been set (by the
`._entry.<spawn-backend>_main()` whenever `--asyncio` is passed)
such that any mismatch can be signaled via an `InternalError`.
- enables checking the `._state._runtime_vars['_is_infected_aio']` value
directly (say from a non-actor/`trio`-thread) instead of calling
`._state.current_actor(err_on_no_runtime=False)` in certain edge
cases.
Impl/testing deats:
- add `._state._runtime_vars['_is_infected_aio'] = False` default.
- raise `InternalError` on any `--asyncio`-flag-passed vs.
`_runtime_vars`-value-relayed-from-parent inside
`Actor._from_parent()` and include a `Runner.is_guest` assert for good
measure B)
- set and relay `infect_asyncio: bool` via runtime-vars to child in
`ActorNursery.start_actor()`.
- verify `actor.is_infected_aio()`, `actor._infected_aio` and
`_state._runtime_vars['_is_infected_aio']` are all set in test suite's
`asyncio_actor()` endpoint.
By re-purposing our `pexpect`-based console matching with a new
`debugging/shield_hang_in_sub.py` example, this tests a few "hanging
actor" conditions more formally:
- that despite a hanging actor's task we can dump
a `stackscope.extract()` tree on relay of `SIGUSR1`.
- the actor tree will terminate despite a shielded forever-sleep by our
"T-800" zombie reaper machinery activating and hard killing the
underlying subprocess.
Some test deats:
- simulates the expect actions of a real user by manually using
`os.kill()` to send both signals to the actor-tree program.
- `pexpect`-matches against `log.devx()` emissions under normal
`debug_mode == True` usage.
- ensure we get the actual "T-800 deployed" `log.error()` msg and
that the actor tree eventually terminates!
Surrounding (re-org/impl/test-suite) changes:
- allow disabling usage via a `maybe_enable_greenback: bool` to
`open_root_actor()` but enable by def.
- pretty up the actual `.devx()` content from `.devx._stackscope`
including be extra pedantic about the conc-primitives for each signal
event.
- try to avoid double handles of `SIGUSR1` even though it seems the
original (what i thought was a) problem was actually just double
logging in the handler..
|_ avoid double applying the handler func via `signal.signal()`,
|_ use a global to avoid double handle func calls and,
|_ a `threading.RLock` around handling.
- move common fixtures and helper routines from `test_debugger` to
`tests/devx/conftest.py` and import them for use in both test mods.
The final issue was making sure we do the same thing on ctl-c/SIGINT
from the user. That is, if there's already a bg-thread in REPL, we
`log.pdb()` about SIGINT shielding and re-draw the prompt; the same UX
as normal actor-runtime-task behaviour.
Reasons this wasn't workin.. and the fix:
- `.pause_from_sync()` was overriding the local `repl` var with `None`
delivered by (transitive) calls to `_pause(debug_func=None)`.. so
remove all that and only assign it OAOO prior to thread-type case
branching.
- always call `DebugStatus.shield_sigint()` as needed from all requesting
threads/tasks:
- in `_pause_from_bg_root_thread()` BEFORE calling `._pause()` AND BEFORE
yielding back to the bg-thread via `.started(out)` to ensure we're
definitely overriding the handler in the `trio`-main-thread task
before unblocking the requesting bg-thread.
- from any requesting bg-thread in the root actor such that both its
main-`trio`-thread scheduled task (as per above bullet) AND it are
SIGINT shielded.
- always call `.shield_sigint()` BEFORE any `greenback._await()` case
don't entirely grok why yet, but it works)?
- for `greenback._await()` case always set `bg_task` to the current one..
- tweaks to the `SIGINT` handler, now renamed `sigint_shield()` so as
not to name-collide with the methods when editor-searching:
- always try to `repr()` the REPL thread/task "owner" as well as the
active `PdbREPL` instance.
- add `.devx()` notes around the prompt flushing deats and comments
for any root-actor-bg-thread edge cases.
Related/supporting refinements:
- add `get_lock()`/`get_debug_req()` factory funcs since the plan is to
eventually implement both as `@singleton` instances per actor.
- fix `acquire_debug_lock()`'s call-sig-bug for scheduling
`request_root_stdio_lock()`..
- in `._pause()` only call `mk_pdb()` when `debug_func != None`.
- add some todo/warning notes around the `cls.repl = None` in
`DebugStatus.release()`
`test_pause_from_sync()` tweaks:
- don't use a `attach_patts.copy()`, since we always `break` on match.
- do `pytest.fail()` on that ^ loop's fallthrough..
- pass `do_ctlc(child, patt=attach_key)` such that we always match the
the current thread's name with the ctl-c triggered `.pdb()` emission.
- oh yeah, return the last `before: str` from `do_ctlc()`.
- in the script, flip `abandon_on_cancel=True` since when `False` it
seems to cause `trio.run()` to hang on exit from the last bg-thread
case?!?
Guillermo Rodriguez
Tyler Goodlet