Mostly due to magic from @oremanj (a super-end-level-boss) where we slap
in a little bit of `.from_asyncio`-type stuff to run a `trio`-task from
`asyncio` code
I'm not gonna go into tooo too much detail but basically the primary
thing needed was a way to (blocking-ly) invoke a `trio.lowlevel.Task`
from an `asyncio.Task` (which we now have with a new
`run_trio_task_in_future()` thanks to the "aforementioned jefe") which
we now invoke from a dedicated aio case-branch inside
`.devx._debug.pause_from_sync()`. Further include a case inside
`DebugStatus.release()` to handle using the same func to set the
`repl_release: trio.Event` from the `asyncio` side when releasing the
REPL.
Prolly more refinements to come ;{o
It was expecting `AssertionError` as a proceed-in-test signal (by
breaking from a continue loop), but `in_prompt_msg(raise_on_err=True)`
was changed to raise `ValueError`; so instead just use as a predicate
for the `break`.
Also rework `in_prompt_msg()` to accept the `child: BaseSpawn` as input
instead of `before: str` remove the casting boilerplate, and adjust all
usage to match.
Just like we've started doing throughout the rest of the actor runtime
for reporting (and where "sclang" = "structured conc (s)lang", our
little supervision-focused operations syntax i've been playing with in
log msg content).
Further tweaks:
- report the `trio_done_fute` alongside the `main_outcome` value.
- add a todo list for supporting `greenback` for pause points.
The reason for this "duplication" with the `--asyncio` CLI flag (passed
to the child during spawn) is 2-fold:
- allows verifying inside `Actor._from_parent()` that the `trio` runtime was
started via `.start_guest_run()` as well as if the
`Actor._infected_aio` spawn-entrypoint value has been set (by the
`._entry.<spawn-backend>_main()` whenever `--asyncio` is passed)
such that any mismatch can be signaled via an `InternalError`.
- enables checking the `._state._runtime_vars['_is_infected_aio']` value
directly (say from a non-actor/`trio`-thread) instead of calling
`._state.current_actor(err_on_no_runtime=False)` in certain edge
cases.
Impl/testing deats:
- add `._state._runtime_vars['_is_infected_aio'] = False` default.
- raise `InternalError` on any `--asyncio`-flag-passed vs.
`_runtime_vars`-value-relayed-from-parent inside
`Actor._from_parent()` and include a `Runner.is_guest` assert for good
measure B)
- set and relay `infect_asyncio: bool` via runtime-vars to child in
`ActorNursery.start_actor()`.
- verify `actor.is_infected_aio()`, `actor._infected_aio` and
`_state._runtime_vars['_is_infected_aio']` are all set in test suite's
`asyncio_actor()` endpoint.
By re-purposing our `pexpect`-based console matching with a new
`debugging/shield_hang_in_sub.py` example, this tests a few "hanging
actor" conditions more formally:
- that despite a hanging actor's task we can dump
a `stackscope.extract()` tree on relay of `SIGUSR1`.
- the actor tree will terminate despite a shielded forever-sleep by our
"T-800" zombie reaper machinery activating and hard killing the
underlying subprocess.
Some test deats:
- simulates the expect actions of a real user by manually using
`os.kill()` to send both signals to the actor-tree program.
- `pexpect`-matches against `log.devx()` emissions under normal
`debug_mode == True` usage.
- ensure we get the actual "T-800 deployed" `log.error()` msg and
that the actor tree eventually terminates!
Surrounding (re-org/impl/test-suite) changes:
- allow disabling usage via a `maybe_enable_greenback: bool` to
`open_root_actor()` but enable by def.
- pretty up the actual `.devx()` content from `.devx._stackscope`
including be extra pedantic about the conc-primitives for each signal
event.
- try to avoid double handles of `SIGUSR1` even though it seems the
original (what i thought was a) problem was actually just double
logging in the handler..
|_ avoid double applying the handler func via `signal.signal()`,
|_ use a global to avoid double handle func calls and,
|_ a `threading.RLock` around handling.
- move common fixtures and helper routines from `test_debugger` to
`tests/devx/conftest.py` and import them for use in both test mods.
The final issue was making sure we do the same thing on ctl-c/SIGINT
from the user. That is, if there's already a bg-thread in REPL, we
`log.pdb()` about SIGINT shielding and re-draw the prompt; the same UX
as normal actor-runtime-task behaviour.
Reasons this wasn't workin.. and the fix:
- `.pause_from_sync()` was overriding the local `repl` var with `None`
delivered by (transitive) calls to `_pause(debug_func=None)`.. so
remove all that and only assign it OAOO prior to thread-type case
branching.
- always call `DebugStatus.shield_sigint()` as needed from all requesting
threads/tasks:
- in `_pause_from_bg_root_thread()` BEFORE calling `._pause()` AND BEFORE
yielding back to the bg-thread via `.started(out)` to ensure we're
definitely overriding the handler in the `trio`-main-thread task
before unblocking the requesting bg-thread.
- from any requesting bg-thread in the root actor such that both its
main-`trio`-thread scheduled task (as per above bullet) AND it are
SIGINT shielded.
- always call `.shield_sigint()` BEFORE any `greenback._await()` case
don't entirely grok why yet, but it works)?
- for `greenback._await()` case always set `bg_task` to the current one..
- tweaks to the `SIGINT` handler, now renamed `sigint_shield()` so as
not to name-collide with the methods when editor-searching:
- always try to `repr()` the REPL thread/task "owner" as well as the
active `PdbREPL` instance.
- add `.devx()` notes around the prompt flushing deats and comments
for any root-actor-bg-thread edge cases.
Related/supporting refinements:
- add `get_lock()`/`get_debug_req()` factory funcs since the plan is to
eventually implement both as `@singleton` instances per actor.
- fix `acquire_debug_lock()`'s call-sig-bug for scheduling
`request_root_stdio_lock()`..
- in `._pause()` only call `mk_pdb()` when `debug_func != None`.
- add some todo/warning notes around the `cls.repl = None` in
`DebugStatus.release()`
`test_pause_from_sync()` tweaks:
- don't use a `attach_patts.copy()`, since we always `break` on match.
- do `pytest.fail()` on that ^ loop's fallthrough..
- pass `do_ctlc(child, patt=attach_key)` such that we always match the
the current thread's name with the ctl-c triggered `.pdb()` emission.
- oh yeah, return the last `before: str` from `do_ctlc()`.
- in the script, flip `abandon_on_cancel=True` since when `False` it
seems to cause `trio.run()` to hang on exit from the last bg-thread
case?!?
There's a been a todo for soo long for this XD
Since all `Actor`'s store a set of `._peers` we can try a lookup on that
table as a shortcut before pinging the registry Bo
Impl deats:
- add a new `._discovery.get_peer_by_name()` routine which attempts the
`._peers` lookup by combining a copy of that `dict` + an entry added
for `Actor._parent_chan` (since all subs have a parent and often the
desired contact is just that connection).
- change `.find_actor()` (for the `only_first == True` case),
`.query_actor()` and `.wait_for_actor()` to call the new helper and
deliver appropriate outputs if possible.
Other,
- deprecate `get_arbiter()` def and all usage in tests and examples.
- drop lingering use of `arbiter_sockaddr` arg to various routines.
- tweak the `Actor` doc str as well as some code fmting and a tweak to
the `._stream_handler()`'s initial `con_status: str` logging value
since the way it was could never be reached.. oh and `.warning()` on
any new connections which already have a `_pre_chan: Channel` entry in
`._peers` so we can start minimizing IPC duplications.
In the `drain_to_final_msg()` impl, since a stream terminating
gracefully requires this msg, there's really no reason to `log.cancel()`
about it; go `.runtime()` level instead since we're trying de-noise
under "normal operation".
Also,
- passthrough `hide_tb` to taskc-handler's `ctx.maybe_raise()` call.
- raise `MessagingError` for the `MsgType` unmatched `case _:`.
- detail the doc string motivation a little more.
In `lock_stdio_for_peer()` better internal-error handling/reporting:
- only `Lock._blocked.remove(ctx.cid)` if that same cid was added on
entry to avoid needless key-errors.
- drop all `Lock.release(force: bool)` usage remnants.
- if `req_ctx.cancel()` fails mention it with `ctx_err.add_note()`.
- add more explicit internal-failed-request log messaging via a new
`fail_reason: str`.
- use and use new `x)<=\n|_` annots in any failure logging.
Other cleanups/niceties:
- drop `force: bool` flag entirely from the `Lock.release()`.
- use more supervisor-op-annots in `.pdb()` logging
with both `_pause/crash_msg: str` instead of double '|' lines when
`.pdb()`-reported from `._set_trace()`/`._post_mortem()`.
As per a WIP scribbled out TODO in `._entry.nest_from_op()`, change
a bunch of "supervisor/lifetime mgmt ops" related log messages to
contain some supervisor-annotation "headers" in an effort to give
a terser "visual indication" of how some execution/scope/storage
primitive entity (like an actor/task/ctx/connection) is being operated
on (like, opening/started/closed/cancelled/erroring) from a "supervisor
action" POV.
Also tweak a bunch more emissions to lower levels to reduce noise around
normal inter-actor operations like process and IPC ctx supervision.
To avoid showing lowlevel details of exception handling around the
underlying call to `return await self._ctx._pld_rx.recv_pld(ipc=self)`,
any time a `RemoteActorError` is unpacked (an raised locally) we re-raise
it directly from the captured `src_err` captured so as to present to
the user/app caller-code an exception raised directly from the `.receive()`
frame. This simplifies traceback call-stacks for any `log.exception()`
or `pdb`-REPL output filtering out the lower `PldRx` frames by default.
Since it was all ad-hoc defined inside
`._ipc.MsgpackTCPStream._iter_pkts()` more or less, this starts
formalizing a way for particular transport backends to indicate whether
a disconnect condition should be re-raised in the RPC msg loop and if
not what log level to report it at (if any).
Based on our lone transport currently we try to suppress any logging
noise from ephemeral connections expected during normal actor
interaction and discovery subsys ops:
- any short lived discovery related TCP connects are only logged as
`.transport()` level.
- both `.error()` and raise on any underlying `trio.ClosedResource`
cause since that normally means some task touched transport layer
internals that it shouldn't have.
- do a `.warning()` on anything else unexpected.
Impl deats:
- extend the `._exceptions.TransportClosed` to accept an input log
level, raise-on-report toggle and custom reporting & raising via a new
`.report_n_maybe_raise()` method.
- construct the TCs with inputs per case in (the newly named) `._iter_pkts().
- call ^ this method from the `TransportClosed` handler block inside the
RPC msg loop thus delegating reporting levels and/or raising to the
backend's per-case TC instantiating.
Related `._ipc` changes:
- mask out all the `MsgpackTCPStream._codec` debug helper stuff and drop
any lingering cruft from the initial proto-ing of msg-codecs.
- rename some attrs/methods:
|_`MsgpackTCPStream._iter_packets()` -> `._iter_pkts()` and
`._agen` -> `_aiter_pkts`.
|_`Channel._aiter_recv()` -> `._aiter_msgs()` and
`._agen` -> `_aiter_msgs`.
- add `hide_tb: bool` support to `Channel.send()` and only show the
frame on non-MTEs.
- allow passing and report the lib name (`trio` or `tractor`) from
`maybe_open_nursery()`.
- use `.runtime()` level when reporting `_Cache`-hits in
`maybe_open_context()`.
- tidy up some doc strings.
In case the struct doesn't import a field type (which will cause the
`.pformat()` to raise) just report the issue and try to fall back to the
original `repr()` version.
It's too fragile to put in side core RPC machinery since
`msgspec.Struct` defs can fail if a field type can't be
looked up at creation time (like can easily happen if you
conditionally import using `if TYPE_CHECKING:`)
Also,
- rename `cs` to `rpc_ctx_cs: CancelScope` since it's literally
the wrapping RPC `Context._scope`.
- report self cancellation via `explain: str` and add tail case for
"unknown cause".
- put a ?TODO? around what to do about KBIs if a context is opened
from an `infected_aio`-actor task.
- similar to our nursery and portal add TODO list for moving all
`_invoke_non_context()` content out the RPC core and instead implement
them as `.hilevel` endpoint helpers (maybe as decorators?)which under
neath define `@context`-funcs.
Log-report the different types of actor exit conditions including cancel
via KBI, error or normal return with varying levels depending on case.
Also, start proto-ing out this weird ascii-syntax idea for describing
conc system states and implement the first bit in a `nest_from_op()`
log-message fmter that joins and indents an obj `repr()` with
a tree-like `'>)\n|_'` header.
Since we more or less require it for `tractor.pause_from_sync()` this
refines enable toggles and their relay down the actor tree as well as
more explicit logging around init and activation.
Tweaks summary:
- `.info()` report the module if discovered during root boot.
- use a `._state._runtime_vars['use_greenback']: bool` activation flag
inside `Actor._from_parent()` to determine if the sub should try to
use it and set to `False` if mod-loading fails / not installed.
- expose `maybe_init_greenback()` from `.devx` sugpkg.
- comment out RTE in `._pause()` for now since we already have it in
`.pause_from_sync()`.
- always `.exception()` on `maybe_init_greenback()` import errors to
clarify the underlying failure deats.
- always explicitly report if `._state._runtime_vars['use_greenback']`
was NOT set when `.pause_from_sync()` is called.
Other `._runtime.async_main()` adjustments:
- combine the "internal error call ur parents" message and the failed
registry contact status into one new `err_report: str`.
- drop the final exception handler's call to
`Actor.lifetime_stack.close()` since we're already doing it in the
`finally:` block and the earlier call has no currently known benefit.
- only report on the `.lifetime_stack()` callbacks if any are detected
as registered.
Not sure how I forgot this but, obviously it's correct context-var
semantics to revert the current IPC `Context` (set in the latest
`.open_context()` block) such that any prior instance is reset..
This ensures the sanity `assert`s pass inside
`.msg._ops.maybe_limit_plds()` and just in general ensures for any task
that the last opened `Context` is the one returned from
`current_ipc_ctx()`.
Turns out it does work XD
Prior presumption was from before I had the fute poll-loop so makes
sense we needed more then one sched-tick's worth of context switch vs.
now we can just keep looping-n-pumping as fast possible until the
guest-run's main task completes.
Also,
- minimize the preface commentary (as per todo) now that we have tests
codifying all the edge cases :finger_crossed:
- parameter-ize the pump-loop-cycle delay and default it to 0.
This change is adding commentary about the upcoming API removal and
simplification of nursery + portal internals; no actual code changes are
included.
The plan to (re)move the old RPC methods:
- `ActorNursery.run_in_actor()`
- `Portal.run()`
- `Portal.run_from_ns()`
and any related impl internals out of each conc-primitive and instead
into something like a `.hilevel.rpc` set of APIs which then are all
implemented using the newer and more lowlevel `Context`/`MsgStream`
primitives instead Bo
Further,
- formally deprecate the `Portal.result()` meth for
`.wait_for_result()`.
- only `log.info()` about runtime shutdown in the implicit root case.
Might as well add a public maybe-getter for use on the "parent" side
since it can be handy to check out-of-band cancellation conditions (like
from `Portal.cancel_actor()`).
Buncha bitty tweaks for more easily debugging cancel conditions:
- add a `@.cancel_called.setter` for hooking into `.cancel_called = True`
being set in hard to decipher "who cancelled us" scenarios.
- use a new `self_ctxc: bool` var in `.cancel()` to capture the output
state from `._is_self_cancelled(remote_error)` at call time so it can
be compared against the measured value at crash-time (when REPL-ing it
can often have already changed due to runtime teardown sequencing vs.
the crash handler hook entry).
- proxy `hide_tb` to `.drain_to_final_msg()` from `.wait_for_result()`.
- use `remote_error.sender` attr directly instead of through
`RAE.msgdata: dict` lookup.
- change var name `our_uid` -> `peer_uid`; it's not "ours"..
Other various docs/comment updates:
- extend the main class doc to include some other name ideas.
- change over all remaining `.result()` refs to `.wait_for_result()`.
- doc more details on how we want `.outcome` to eventually signature.
To make the recent set of tests pass this (hopefully) finally solves all
`asyncio` embedded `trio` guest-run abandonment by ensuring we "pump the
event loop" until the guest-run future is fully complete.
Accomplished via simple poll loop of the form `while not
trio_done_fut.done(): await asyncio.sleep(.1)` in the `aio_main()`
task's exception teardown sequence. The loop does a naive 10ms
"pump-via-sleep & poll" for the `trio` side to complete before finally
exiting (and presumably raising) from the SIGINT cancellation.
Other related cleanups and refinements:
- use `asyncio.Task.result()` inside `cancel_trio()` since it also
inline-raises any exception outcome and we can also log-report the
result in non-error cases.
- comment out buncha not-sure-we-need-it stuff in `cancel_trio()`.
- remove the botched `AsyncioCancelled(CancelledError):` idea obvi XD
- comment `greenback` init for now in `aio_main()` since (pretty sure)
we don't ever want to actually REPL in that specific func-as-task?
- always capture any `fute_err: BaseException` from the `main_outcome:
Outcome` delivered by the `trio` side guest-run task.
- add and raise a new super noisy `AsyncioRuntimeTranslationError`
whenever we detect that the guest-run `trio_done_fut` has not
completed before task exit; should avoid abandonment issues ever
happening again without knowing!
Finally this reproduces the issue as it (originally?) exhibited inside
`piker` where the `Actor.lifetime_stack` wasn't closed in cases where
during `infected_aio`-actor cancellation/shutdown `trio` side tasks
which are doing shielded (teardown) work are NOT being watched/waited on
from the `aio_main()` task-closure inside `run_as_asyncio_guest()`!
This is then the root cause of the guest-run being abandoned since if
our `aio_main()` task-closure doesn't know it should allow the run to
finish, it's going to call `loop.close()` eventually resulting in the
`GeneratorExit` thrown into `trio._core._run.unrolled_run()`..
So, this extends the `test_sigint_closes_lifetime_stack()` suite to
include cases for such shielded `trio`-task ops:
- add a new `trio_side_is_shielded: bool` which will toggle whether to
add a shielded 0.5s `trio.sleep()` loop to `manage_file()` which
should outlive the `asyncio` event-loop shutdown sequence and result
in an abandoned guest-run and thus a leaked file.
- parametrize the existing suite with this case resulting in a total 16
test set B)
This patch demonstrates the problem with our `aio_main()` task-closure
impl via the now 4 failing tests, a fix is coming in a follow up commit!
Turns out it somehow breaks our `to_asyncio` error relay since obvi
`asyncio`'s runtime seems to specially handle it (prolly via
`isinstance()` ?) and it caused our
`test_aio_cancelled_from_aio_causes_trio_cancelled()` to hang..
Further, obvi `unpack_error()` won't be able to find the type def if not
kept inside `._exceptions`..
So given all that, revert the change/move as well as:
- tweak the aio-from-aio cancel test to timeout.
- do `trio.sleep()` conc with any bg aio task by moving out nursery
block.
- add a `send_sigint_to: str` parameter to
`test_sigint_closes_lifetime_stack()` such that we test the SIGINT
being relayed to just the parent or the child.
Took me a while to figure out what the heck was going on but, turns out
`asyncio` changed their SIGINT handling in 3.11 as per:
https://docs.python.org/3/library/asyncio-runner.html#handling-keyboard-interruption
I'm not entirely sure if it's the 3.11 changes or possibly wtv further
updates were made in 3.12 but more or less due to the way
our current main task was written the `trio` guest-run was getting
abandoned on SIGINTs sent from the OS to the infected child proc..
Note that much of the bug and soln cases are layed out in very detailed
comment-notes both in the new test and `run_as_asyncio_guest()`, right
above the final "fix" lines.
Add new `test_infected_aio.test_sigint_closes_lifetime_stack()` test suite
which reliably triggers all abandonment issues with multiple cases
of different parent behaviour post-sending-SIGINT-to-child:
1. briefly sleep then raise a KBI in the parent which was originally
demonstrating the file leak not being cleaned up by `Actor.lifetime_stack.close()`
and simulates a ctl-c from the console (relayed in tandem by
the OS to the parent and child processes).
2. do `Context.wait_for_result()` on the child context which would
hang and timeout since the actor runtime would never complete and
thus never relay a `ContextCancelled`.
3. both with and without running a `asyncio` task in the `manage_file`
child actor; originally it seemed that with an aio task scheduled in
the child actor the guest-run abandonment always was the "loud" case
where there seemed to be some actor teardown but with tbs from
python failing to gracefully exit the `trio` runtime..
The (seemingly working) "fix" required 2 lines of code to be run inside
a `asyncio.CancelledError` handler around the call to `await trio_done_fut`:
- `Actor.cancel_soon()` which schedules the actor runtime to cancel on
the next `trio` runner cycle and results in a "self cancellation" of
the actor.
- "pumping the `asyncio` event loop" with a non-0 `.sleep(0.1)` XD
|_ seems that a "shielded" pump with some actual `delay: float >= 0`
did the trick to get `asyncio` to allow the `trio` runner/loop to
fully complete its guest-run without abandonment.
Other supporting changes:
- move `._exceptions.AsyncioCancelled`, our renamed
`asyncio.CancelledError` error-sub-type-wrapper, to `.to_asyncio` and make
it derive from `CancelledError` so as to be sure when raised by our
`asyncio` x-> `trio` exception relay machinery that `asyncio` is
getting the specific type it expects during cancellation.
- do "summary status" style logging in `run_as_asyncio_guest()` wherein
we compile the eventual `startup_msg: str` emitted just before waiting
on the `trio_done_fut`.
- shield-wait with `out: Outcome = await asyncio.shield(trio_done_fut)`
even though it seems to do nothing in the SIGINT handling case..(I
presume it might help avoid abandonment in a `asyncio.Task.cancel()`
case maybe?)
Since a local-actor-nursery-parented subactor might also use the root as
its registry, we need to avoid warning when short lived IPC `Channel`
connections establish and then disconnect (quickly, bc the apparently
the subactor isn't re-using an already cached parente-peer<->child conn
as you'd expect efficiency..) since such cases currently considered
normal operation of our super shoddy/naive "discovery sys" XD
As such, (un)guard the whole local-actor-nursery OR channel-draining
waiting blocks with the additional `or Actor._cancel_called` branch
since really we should also be waiting on the parent nurse to exit (at
least, for sure and always) when the local `Actor` indeed has been
"globally" cancelled-called. Further add separate timeout warnings for
channel-draining vs. local-actor-nursery-exit waiting since they are
technically orthogonal cases (at least, afaik).
Also,
- adjust the `Actor._stream_handler()` connection status log-emit to
`.runtime()`, especially to reduce noise around the aforementioned
ephemeral registree connection-requests.
- if we do wait on a local actor-nurse to exit, report its `._children`
table (which should help figure out going forward how useful the
warning is, if at all).
Name them `_mk_send_mte()`/`_mk_recv_mte()` and change the runtime to
call each appropriately depending on location/usage.
Also add some dynamic call-frame "unhide" blocks such that when we
expect raised MTE from the aboves calls but we get a different
unexpected error from the runtime, we ensure the call stack downward is
shown in tbs/pdb.
|_ ideally in the longer run we come up with a fancier dynamic sys for
this, prolly something in `.devx._frame_stack`?
Just pass `_bad_msg` such that it get's injected to `.msgdata` since
with a send-side `MsgTypeError` we don't have a remote `._ipc_msg:
Error` per say to include.
The tests only use one input spec (conveniently) so there's not much to
change in the logic,
- only pass the `maybe_msg_spec` to the child-side decorator and obvi
drop the surrounding `msgops.limit_plds()` block in the child.
- tweak a few `MsgDec` asserts, mostly dropping the
`msg._ops._def_any_spec` state checks since the child-side won't have
any pre pld-spec state given the runtime now applies the `pld_spec`
before running the task's func body.
- also allowed dropping the `finally:` which did a similar check
outside the `.limit_plds()` block.
Namely passing the `.__pld_spec__` directly to the
`lock_stdio_for_peer()` decorator B)
Also, allows dropping `apply_debug_pldec()` (which was a todo) and
removing a `lock_stdio_for_peer()` indent level.
Instead of the WIP/prototyped `Portal.open_context()` offering
a `pld_spec` input arg, this changes to a proper decorator API for
specifying the "payload spec" on `@context` endpoints.
The impl change details actually cover 2-birds:
- monkey patch decorated functions with a new
`._tractor_context_meta: dict[str, Any]` and insert any provided input
`@context` kwargs: `_pld_spec`, `enc_hook`, `enc_hook`.
- use `inspect.get_annotations()` to scan for a `func` arg
type-annotated with `tractor.Context` and use the name of that arg as
the RPC task-side injected `Context`, thus injecting the needed arg
by type instead of by name (a longstanding TODO); raise a type-error
when not found.
- pull the `pld_spec` from the `._tractor_context_meta` attr both in the
`.open_context()` parent-side and child-side `._invoke()`-cation of
the RPC task and use the `msg._ops.maybe_limit_plds()` API to apply it
internally in the runtime for each case.
`RemoteActorError`s show this by default in their `.__repr__()`, and we
obvi capture and embed the src traceback in an `Error` msg prior to
transit, but for logging it's also handy to see the tb of any set
`Context._remote_error` on console especially when trying to decipher
remote error details at their origin actor. Also improve the log message
description using `ctx.repr_state` and show any `ctx.outcome`.
Longer run we don't want `tractor` app devs having to call
`msg._ops.limit_plds()` from every child endpoint.. so this starts
a list of decorator API ideas and obviously ties in with an ideal final
API design that will come with py3.13 and typed funcs. Obviously this
is directly fueled by,
- https://github.com/goodboy/tractor/issues/365
Other,
- type with direct `trio.lowlevel.Task` import.
- use `log.exception()` to show tbs for all error-terminations in
`.open_context()` (for now) and always explicitly mention the `.side`.
Tyler Goodlet