Drop `bar_wap` curve for now, seems to also be causing hangs?!

Use the new `open_history_client()` endpoint/API and expect backends to
provide a history "getter" routine that can be called to load historical
data into shm even when **not** using a tsdb. Add logic for filling in
data from the tsdb once the backend has provided data up to the last
recorded in the db. Add logic for avoiding overruns of the shm buffer
with more-then-necessary queries of tsdb data.

piker/_daemon.py

@@ -19,7 +19,7 @@ Structured, daemon tree service management.
 
 """
 from typing import Optional, Union, Callable, Any
-from contextlib import asynccontextmanager
+from contextlib import asynccontextmanager as acm
 from collections import defaultdict
 
 from pydantic import BaseModel
@@ -35,7 +35,7 @@ log = get_logger(__name__)
 
 _root_dname = 'pikerd'
 
-_registry_addr = ('127.0.0.1', 6116)
+_registry_addr = ('127.0.0.1', 1616)
 _tractor_kwargs: dict[str, Any] = {
     # use a different registry addr then tractor's default
     'arbiter_addr': _registry_addr
@@ -91,13 +91,17 @@ class Services(BaseModel):
                     log.info(
                         f'`pikerd` service {name} started with value {first}'
                     )
+                    try:
                         # wait on any context's return value
                         ctx_res = await ctx.result()
-
+                    except tractor.ContextCancelled:
+                        return await self.cancel_service(name)
+                    else:
                         # wait on any error from the sub-actor
-                # NOTE: this will block indefinitely until cancelled
-                # either by error from the target context function or by
-                # being cancelled here by the surrounding cancel scope
+                        # NOTE: this will block indefinitely until
+                        # cancelled either by error from the target
+                        # context function or by being cancelled here by
+                        # the surrounding cancel scope
                         return (await portal.result(), ctx_res)
 
         cs, first = await self.service_n.start(open_context_in_task)
@@ -110,20 +114,23 @@ class Services(BaseModel):
 
     # TODO: per service cancellation by scope, we aren't using this
     # anywhere right?
-    # async def cancel_service(
-    #     self,
-    #     name: str,
-    # ) -> Any:
-    #     log.info(f'Cancelling `pikerd` service {name}')
-    #     cs, portal = self.service_tasks[name]
-    #     cs.cancel()
-    #     return await portal.cancel_actor()
+    async def cancel_service(
+        self,
+        name: str,
+    ) -> Any:
+        log.info(f'Cancelling `pikerd` service {name}')
+        cs, portal = self.service_tasks[name]
+        # XXX: not entirely sure why this is required,
+        # and should probably be better fine tuned in
+        # ``tractor``?
+        cs.cancel()
+        return await portal.cancel_actor()
 
 
 _services: Optional[Services] = None
 
 
-@asynccontextmanager
+@acm
 async def open_pikerd(
     start_method: str = 'trio',
     loglevel: Optional[str] = None,
@@ -178,7 +185,7 @@ async def open_pikerd(
             yield _services
 
 
-@asynccontextmanager
+@acm
 async def open_piker_runtime(
     name: str,
     enable_modules: list[str] = [],
@@ -219,7 +226,7 @@ async def open_piker_runtime(
         yield tractor.current_actor()
 
 
-@asynccontextmanager
+@acm
 async def maybe_open_runtime(
     loglevel: Optional[str] = None,
     **kwargs,
@@ -242,7 +249,7 @@ async def maybe_open_runtime(
         yield
 
 
-@asynccontextmanager
+@acm
 async def maybe_open_pikerd(
     loglevel: Optional[str] = None,
     **kwargs,
@@ -293,7 +300,36 @@ class Brokerd:
     locks = defaultdict(trio.Lock)
 
 
-@asynccontextmanager
+@acm
+async def find_service(
+    service_name: str,
+) -> Optional[tractor.Portal]:
+
+    log.info(f'Scanning for service `{service_name}`')
+    # attach to existing daemon by name if possible
+    async with tractor.find_actor(
+        service_name,
+        arbiter_sockaddr=_registry_addr,
+    ) as maybe_portal:
+        yield maybe_portal
+
+
+async def check_for_service(
+    service_name: str,
+
+) -> bool:
+    '''
+    Service daemon "liveness" predicate.
+
+    '''
+    async with tractor.query_actor(
+        service_name,
+        arbiter_sockaddr=_registry_addr,
+    ) as sockaddr:
+        return sockaddr
+
+
+@acm
 async def maybe_spawn_daemon(
 
     service_name: str,
@@ -303,7 +339,7 @@ async def maybe_spawn_daemon(
     **kwargs,
 
 ) -> tractor.Portal:
-    """
+    '''
     If no ``service_name`` daemon-actor can be found,
     spawn one in a local subactor and return a portal to it.
 
@@ -314,7 +350,7 @@ async def maybe_spawn_daemon(
     This can be seen as a service starting api for remote-actor
     clients.
 
-    """
+    '''
     if loglevel:
         get_console_log(loglevel)
 
@@ -323,13 +359,7 @@ async def maybe_spawn_daemon(
     lock = Brokerd.locks[service_name]
     await lock.acquire()
 
-    log.info(f'Scanning for existing {service_name}')
-    # attach to existing daemon by name if possible
-    async with tractor.find_actor(
-        service_name,
-        arbiter_sockaddr=_registry_addr,
-
-    ) as portal:
+    async with find_service(service_name) as portal:
         if portal is not None:
             lock.release()
             yield portal
@@ -372,6 +402,7 @@ async def maybe_spawn_daemon(
         async with tractor.wait_for_actor(service_name) as portal:
             lock.release()
             yield portal
+            await portal.cancel_actor()
 
 
 async def spawn_brokerd(
@@ -415,7 +446,7 @@ async def spawn_brokerd(
     return True
 
 
-@asynccontextmanager
+@acm
 async def maybe_spawn_brokerd(
 
     brokername: str,
@@ -423,7 +454,9 @@ async def maybe_spawn_brokerd(
     **kwargs,
 
 ) -> tractor.Portal:
-    '''Helper to spawn a brokerd service.
+    '''
+    Helper to spawn a brokerd service *from* a client
+    who wishes to use the sub-actor-daemon.
 
     '''
     async with maybe_spawn_daemon(
@@ -475,7 +508,7 @@ async def spawn_emsd(
     return True
 
 
-@asynccontextmanager
+@acm
 async def maybe_open_emsd(
 
     brokername: str,

piker/_profile.py

@@ -21,7 +21,10 @@ Profiling wrappers for internal libs.
 import time
 from functools import wraps
 
-_pg_profile: bool = True
+# NOTE: you can pass a flag to enable this:
+# ``piker chart <args> --profile``.
+_pg_profile: bool = False
+ms_slower_then: float = 0
 
 
 def pg_profile_enabled() -> bool:

piker/brokers/_util.py

@@ -33,7 +33,41 @@ class SymbolNotFound(BrokerError):
 
 
 class NoData(BrokerError):
-    "Symbol data not permitted"
+    '''
+    Symbol data not permitted or no data
+    for time range found.
+
+    '''
+    def __init__(
+        self,
+        *args,
+        frame_size: int = 1000,
+
+    ) -> None:
+        super().__init__(*args)
+
+        # when raised, machinery can check if the backend
+        # set a "frame size" for doing datetime calcs.
+        self.frame_size: int = 1000
+
+
+class DataUnavailable(BrokerError):
+    '''
+    Signal storage requests to terminate.
+
+    '''
+    # TODO: add in a reason that can be displayed in the
+    # UI (for eg. `kraken` is bs and you should complain
+    # to them that you can't pull more OHLC data..)
+
+
+class DataThrottle(BrokerError):
+    '''
+    Broker throttled request rate for data.
+
+    '''
+    # TODO: add in throttle metrics/feedback
+
 
 
 def resproc(
@@ -50,12 +84,12 @@ def resproc(
     if not resp.status_code == 200:
         raise BrokerError(resp.body)
     try:
-        json = resp.json()
+        msg = resp.json()
     except json.decoder.JSONDecodeError:
         log.exception(f"Failed to process {resp}:\n{resp.text}")
         raise BrokerError(resp.text)
 
     if log_resp:
-        log.debug(f"Received json contents:\n{colorize_json(json)}")
+        log.debug(f"Received json contents:\n{colorize_json(msg)}")
 
-    return json if return_json else resp
+    return msg if return_json else resp

piker/brokers/binance.py

@@ -19,6 +19,7 @@ Binance backend
 
 """
 from contextlib import asynccontextmanager as acm
+from datetime import datetime
 from typing import (
     Any, Union, Optional,
     AsyncGenerator, Callable,
@@ -221,20 +222,22 @@ class Client:
     async def bars(
         self,
         symbol: str,
-        start_time: int = None,
-        end_time: int = None,
+        start_dt: Optional[datetime] = None,
+        end_dt: Optional[datetime] = None,
         limit: int = 1000,  # <- max allowed per query
         as_np: bool = True,
 
     ) -> dict:
 
-        if start_time is None:
-            start_time = binance_timestamp(
-                pendulum.now('UTC').start_of('minute').subtract(minutes=limit)
-            )
+        if end_dt is None:
+            end_dt = pendulum.now('UTC')
 
-        if end_time is None:
-            end_time = binance_timestamp(pendulum.now('UTC'))
+        if start_dt is None:
+            start_dt = end_dt.start_of(
+                'minute').subtract(minutes=limit)
+
+        start_time = binance_timestamp(start_dt)
+        end_time = binance_timestamp(end_dt)
 
         # https://binance-docs.github.io/apidocs/spot/en/#kline-candlestick-data
         bars = await self._api(
@@ -379,7 +382,27 @@ async def open_history_client(
 
     # TODO implement history getter for the new storage layer.
     async with open_cached_client('binance') as client:
-        yield client
+
+        async def get_ohlc(
+            end_dt: Optional[datetime] = None,
+            start_dt: Optional[datetime] = None,
+
+        ) -> tuple[
+            np.ndarray,
+            datetime,  # start
+            datetime,  # end
+        ]:
+
+            array = await client.bars(
+                symbol,
+                start_dt=start_dt,
+                end_dt=end_dt,
+            )
+            start_dt = pendulum.from_timestamp(array[0]['time'])
+            end_dt = pendulum.from_timestamp(array[-1]['time'])
+            return array, start_dt, end_dt
+
+        yield get_ohlc
 
 
 async def backfill_bars(

piker/brokers/ib.py

@@ -37,7 +37,6 @@ import asyncio
 from pprint import pformat
 import inspect
 import logging
-import platform
 from random import randint
 import time
 
@@ -296,6 +295,10 @@ class Client:
         global _enters
         # log.info(f'REQUESTING BARS {_enters} @ end={end_dt}')
         print(f'REQUESTING BARS {_enters} @ end={end_dt}')
+
+        if not end_dt:
+            end_dt = ''
+
         _enters += 1
 
         contract = await self.find_contract(fqsn)
@@ -1479,7 +1482,9 @@ async def get_bars(
 
             if 'No market data permissions for' in msg:
                 # TODO: signalling for no permissions searches
-                raise NoData(f'Symbol: {fqsn}')
+                raise NoData(
+                    f'Symbol: {fqsn}',
+                )
                 break
 
             elif (
@@ -1547,8 +1552,8 @@ async def open_history_client(
     async with open_client_proxy() as proxy:
 
         async def get_hist(
-            end_dt: str,
-            start_dt: str = '',
+            end_dt: Optional[datetime] = None,
+            start_dt: Optional[datetime] = None,
 
         ) -> tuple[np.ndarray, str]:
 
@@ -1556,10 +1561,13 @@ async def open_history_client(
 
             # TODO: add logic here to handle tradable hours and only grab
             # valid bars in the range
-            if out == (None, None):
+            if out is None:
                 # could be trying to retreive bars over weekend
                 log.error(f"Can't grab bars starting at {end_dt}!?!?")
-                raise NoData(f'{end_dt}')
+                raise NoData(
+                    f'{end_dt}',
+                    frame_size=2000,
+                )
 
             bars, bars_array, first_dt, last_dt = out
 
@@ -1583,7 +1591,7 @@ async def backfill_bars(
     # on that until we have the `marketstore` daemon in place in which
     # case the shm size will be driven by user config and available sys
     # memory.
-    count: int = 100,
+    count: int = 16,
 
     task_status: TaskStatus[trio.CancelScope] = trio.TASK_STATUS_IGNORED,
 
@@ -1603,11 +1611,6 @@ async def backfill_bars(
         # async with open_history_client(fqsn) as proxy:
         async with open_client_proxy() as proxy:
 
-            if platform.system() == 'Windows':
-                log.warning(
-                    'Decreasing history query count to 4 since, windows...')
-                count = 4
-
             out, fails = await get_bars(proxy, fqsn)
 
             if out is None:
@@ -2441,8 +2444,8 @@ async def data_reset_hack(
     try:
         import i3ipc
     except ImportError:
-        return False
         log.warning('IB data hack no-supported on ur platformz')
+        return False
 
     i3 = i3ipc.Connection()
     t = i3.get_tree()

piker/brokers/kraken.py

@@ -20,7 +20,8 @@ Kraken backend.
 '''
 from contextlib import asynccontextmanager as acm
 from dataclasses import asdict, field
-from typing import Any, Optional, AsyncIterator, Callable
+from datetime import datetime
+from typing import Any, Optional, AsyncIterator, Callable, Union
 import time
 
 from trio_typing import TaskStatus
@@ -40,7 +41,13 @@ import base64
 
 from .. import config
 from .._cacheables import open_cached_client
-from ._util import resproc, SymbolNotFound, BrokerError
+from ._util import (
+    resproc,
+    SymbolNotFound,
+    BrokerError,
+    DataThrottle,
+    DataUnavailable,
+)
 from ..log import get_logger, get_console_log
 from ..data import ShmArray
 from ..data._web_bs import open_autorecon_ws, NoBsWs
@@ -391,17 +398,26 @@ class Client:
     async def bars(
         self,
         symbol: str = 'XBTUSD',
+
         # UTC 2017-07-02 12:53:20
-        since: int = None,
+        since: Optional[Union[int, datetime]] = None,
         count: int = 720,  # <- max allowed per query
         as_np: bool = True,
+
     ) -> dict:
+
         if since is None:
             since = pendulum.now('UTC').start_of('minute').subtract(
                 minutes=count).timestamp()
 
+        elif isinstance(since, int):
+            since = pendulum.from_timestamp(since).timestamp()
+
+        else:  # presumably a pendulum datetime
+            since = since.timestamp()
+
         # UTC 2017-07-02 12:53:20 is oldest seconds value
-        since = str(max(1499000000, since))
+        since = str(max(1499000000, int(since)))
         json = await self._public(
             'OHLC',
             data={
@@ -445,7 +461,16 @@ class Client:
             array = np.array(new_bars, dtype=_ohlc_dtype) if as_np else bars
             return array
         except KeyError:
-            raise SymbolNotFound(json['error'][0] + f': {symbol}')
+            errmsg = json['error'][0]
+
+            if 'not found' in errmsg:
+                raise SymbolNotFound(errmsg + f': {symbol}')
+
+            elif 'Too many requests' in errmsg:
+                raise DataThrottle(f'{symbol}')
+
+            else:
+                raise BrokerError(errmsg)
 
 
 @acm
@@ -668,8 +693,8 @@ async def handle_order_requests(
                                 oid=msg.oid,
                                 reqid=msg.reqid,
                                 symbol=msg.symbol,
-                                # TODO: maybe figure out if pending cancels will
-                                # eventually get cancelled
+                                # TODO: maybe figure out if pending
+                                # cancels will eventually get cancelled
                                 reason="Order cancel is still pending?",
                                 broker_details=resp
                             ).dict()
@@ -1003,7 +1028,45 @@ async def open_history_client(
 
     # TODO implement history getter for the new storage layer.
     async with open_cached_client('kraken') as client:
-        yield client
+
+        # lol, kraken won't send any more then the "last"
+        # 720 1m bars.. so we have to just ignore further
+        # requests of this type..
+        queries: int = 0
+
+        async def get_ohlc(
+            end_dt: Optional[datetime] = None,
+            start_dt: Optional[datetime] = None,
+
+        ) -> tuple[
+            np.ndarray,
+            datetime,  # start
+            datetime,  # end
+        ]:
+
+            nonlocal queries
+            if queries > 0:
+                raise DataUnavailable
+
+            count = 0
+            while count <= 3:
+                try:
+                    array = await client.bars(
+                        symbol,
+                        since=end_dt,
+                    )
+                    count += 1
+                    queries += 1
+                    break
+                except DataThrottle:
+                    log.warning(f'kraken OHLC throttle for {symbol}')
+                    await trio.sleep(1)
+
+            start_dt = pendulum.from_timestamp(array[0]['time'])
+            end_dt = pendulum.from_timestamp(array[-1]['time'])
+            return array, start_dt, end_dt
+
+        yield get_ohlc
 
 
 async def backfill_bars(

piker/clearing/_allocate.py

@@ -178,7 +178,9 @@ class Allocator(BaseModel):
             l_sub_pp = (self.currency_limit - live_cost_basis) / price
 
         else:
-            raise ValueError(f"Not valid size unit '{size}'")
+            raise ValueError(
+                f"Not valid size unit '{size_unit}'"
+            )
 
         # an entry (adding-to or starting a pp)
         if (
@@ -282,6 +284,14 @@ class Allocator(BaseModel):
         return round(prop * self.slots)
 
 
+_derivs = (
+    'future',
+    'continuous_future',
+    'option',
+    'futures_option',
+)
+
+
 def mk_allocator(
 
     symbol: Symbol,
@@ -290,7 +300,7 @@ def mk_allocator(
     # default allocation settings
     defaults: dict[str, float] = {
         'account': None,  # select paper by default
-        'size_unit': 'currency', #_size_units['currency'],
+        'size_unit': 'currency',
         'units_limit': 400,
         'currency_limit': 5e3,
         'slots': 4,
@@ -318,11 +328,9 @@ def mk_allocator(
 
     asset_type = symbol.type_key
 
-
     # specific configs by asset class / type
 
-    if asset_type in ('future', 'option', 'futures_option'):
-
+    if asset_type in _derivs:
         # since it's harder to know how currency "applies" in this case
         # given leverage properties
         alloc.size_unit = '# units'
@@ -345,7 +353,7 @@ def mk_allocator(
         if startup_size > alloc.units_limit:
             alloc.units_limit = startup_size
 
-            if asset_type in ('future', 'option', 'futures_option'):
+            if asset_type in _derivs:
                 alloc.slots = alloc.units_limit
 
     return alloc

piker/clearing/_ems.py

@@ -261,7 +261,15 @@ async def clear_dark_triggers(
                             f'pred for {oid} was already removed!?'
                         )
 
+                    try:
                         await ems_client_order_stream.send(msg)
+                    except (
+                        trio.ClosedResourceError,
+                    ):
+                        log.warning(
+                            f'client {ems_client_order_stream} stream is broke'
+                        )
+                        break
 
                 else:  # condition scan loop complete
                     log.debug(f'execs are {execs}')
@@ -573,8 +581,16 @@ async def translate_and_relay_brokerd_events(
 
             # fan-out-relay position msgs immediately by
             # broadcasting updates on all client streams
-            for client_stream in router.clients:
+            for client_stream in router.clients.copy():
+                try:
                     await client_stream.send(pos_msg)
+                except(
+                    trio.ClosedResourceError,
+                    trio.BrokenResourceError,
+                ):
+                    router.clients.remove(client_stream)
+                    log.warning(
+                        f'client for {client_stream} was already closed?')
 
             continue
 

piker/cli/__init__.py

@@ -16,29 +16,22 @@ from .. import config
 log = get_logger('cli')
 DEFAULT_BROKER = 'questrade'
 
-_config_dir = click.get_app_dir('piker')
-_watchlists_data_path = os.path.join(_config_dir, 'watchlists.json')
-_context_defaults = dict(
-    default_map={
-        # Questrade specific quote poll rates
-        'monitor': {
-            'rate': 3,
-        },
-        'optschain': {
-            'rate': 1,
-        },
-    }
-)
-
 
 @click.command()
 @click.option('--loglevel', '-l', default='warning', help='Logging level')
 @click.option('--tl', is_flag=True, help='Enable tractor logging')
 @click.option('--pdb', is_flag=True, help='Enable tractor debug mode')
 @click.option('--host', '-h', default='127.0.0.1', help='Host address to bind')
-def pikerd(loglevel, host, tl, pdb):
-    """Spawn the piker broker-daemon.
-    """
+@click.option(
+    '--tsdb',
+    is_flag=True,
+    help='Enable local ``marketstore`` instance'
+)
+def pikerd(loglevel, host, tl, pdb, tsdb):
+    '''
+    Spawn the piker broker-daemon.
+
+    '''
     from .._daemon import open_pikerd
     log = get_console_log(loglevel)
 
@@ -52,13 +45,33 @@ def pikerd(loglevel, host, tl, pdb):
         ))
 
     async def main():
-        async with open_pikerd(loglevel=loglevel, debug_mode=pdb):
+
+        async with (
+            open_pikerd(
+                loglevel=loglevel,
+                debug_mode=pdb,
+            ),  # normally delivers a ``Services`` handle
+            trio.open_nursery() as n,
+        ):
+            if tsdb:
+                # TODO:
+                # async with maybe_open_marketstored():
+
+                from piker.data._ahab import start_ahab
+                log.info('Spawning `marketstore` supervisor')
+                ctn_ready = await n.start(
+                    start_ahab,
+                    'marketstored',
+                )
+                await ctn_ready.wait()
+                log.info('`marketstore` container:{uid} up')
+
             await trio.sleep_forever()
 
     trio.run(main)
 
 
-@click.group(context_settings=_context_defaults)
+@click.group(context_settings=config._context_defaults)
 @click.option(
     '--brokers', '-b',
     default=[DEFAULT_BROKER],
@@ -87,8 +100,8 @@ def cli(ctx, brokers, loglevel, tl, configdir):
         'loglevel': loglevel,
         'tractorloglevel': None,
         'log': get_console_log(loglevel),
-        'confdir': _config_dir,
-        'wl_path': _watchlists_data_path,
+        'confdir': config._config_dir,
+        'wl_path': config._watchlists_data_path,
     })
 
     # allow enabling same loglevel in ``tractor`` machinery

piker/config.py

@@ -17,6 +17,8 @@
 """
 Broker configuration mgmt.
 """
+import platform
+import sys
 import os
 from os.path import dirname
 import shutil
@@ -24,14 +26,100 @@ from typing import Optional
 
 from bidict import bidict
 import toml
-import click
 
 from .log import get_logger
 
 log = get_logger('broker-config')
 
-_config_dir = click.get_app_dir('piker')
+
+# taken from ``click`` since apparently they have some
+# super weirdness with sigint and sudo..no clue
+def get_app_dir(app_name, roaming=True, force_posix=False):
+    r"""Returns the config folder for the application.  The default behavior
+    is to return whatever is most appropriate for the operating system.
+
+    To give you an idea, for an app called ``"Foo Bar"``, something like
+    the following folders could be returned:
+
+    Mac OS X:
+      ``~/Library/Application Support/Foo Bar``
+    Mac OS X (POSIX):
+      ``~/.foo-bar``
+    Unix:
+      ``~/.config/foo-bar``
+    Unix (POSIX):
+      ``~/.foo-bar``
+    Win XP (roaming):
+      ``C:\Documents and Settings\<user>\Local Settings\Application Data\Foo Bar``
+    Win XP (not roaming):
+      ``C:\Documents and Settings\<user>\Application Data\Foo Bar``
+    Win 7 (roaming):
+      ``C:\Users\<user>\AppData\Roaming\Foo Bar``
+    Win 7 (not roaming):
+      ``C:\Users\<user>\AppData\Local\Foo Bar``
+
+    .. versionadded:: 2.0
+
+    :param app_name: the application name.  This should be properly capitalized
+                     and can contain whitespace.
+    :param roaming: controls if the folder should be roaming or not on Windows.
+                    Has no affect otherwise.
+    :param force_posix: if this is set to `True` then on any POSIX system the
+                        folder will be stored in the home folder with a leading
+                        dot instead of the XDG config home or darwin's
+                        application support folder.
+    """
+
+    def _posixify(name):
+        return "-".join(name.split()).lower()
+
+    # if WIN:
+    if platform.system() == 'Windows':
+        key = "APPDATA" if roaming else "LOCALAPPDATA"
+        folder = os.environ.get(key)
+        if folder is None:
+            folder = os.path.expanduser("~")
+        return os.path.join(folder, app_name)
+    if force_posix:
+        return os.path.join(os.path.expanduser("~/.{}".format(_posixify(app_name))))
+    if sys.platform == "darwin":
+        return os.path.join(
+            os.path.expanduser("~/Library/Application Support"), app_name
+        )
+    return os.path.join(
+        os.environ.get("XDG_CONFIG_HOME", os.path.expanduser("~/.config")),
+        _posixify(app_name),
+    )
+
+
+_config_dir = _click_config_dir = get_app_dir('piker')
+_parent_user = os.environ.get('SUDO_USER')
+
+if _parent_user:
+    non_root_user_dir = os.path.expanduser(
+        f'~{_parent_user}'
+    )
+    root = 'root'
+    _config_dir = (
+        non_root_user_dir +
+        _click_config_dir[
+            _click_config_dir.rfind(root) + len(root):
+        ]
+    )
+
 _file_name = 'brokers.toml'
+_watchlists_data_path = os.path.join(_config_dir, 'watchlists.json')
+_context_defaults = dict(
+    default_map={
+        # Questrade specific quote poll rates
+        'monitor': {
+            'rate': 3,
+        },
+        'optschain': {
+            'rate': 1,
+        },
+    }
+)
 
 
 def _override_config_dir(

piker/data/_ahab.py

@@ -0,0 +1,348 @@
+# piker: trading gear for hackers
+# Copyright (C) 2018-present  Tyler Goodlet (in stewardship of piker0)
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+'''
+Supervisor for docker with included specific-image service helpers.
+
+'''
+import os
+from typing import (
+    Optional,
+    # Any,
+)
+from contextlib import asynccontextmanager as acm
+
+import trio
+from trio_typing import TaskStatus
+import tractor
+import docker
+import json
+from docker.models.containers import Container
+from docker.errors import DockerException, APIError
+from requests.exceptions import ConnectionError, ReadTimeout
+
+from ..log import get_logger, get_console_log
+from .. import config
+
+log = get_logger(__name__)
+
+
+_config = '''
+# piker's ``marketstore`` config.
+
+# mount this config using:
+# sudo docker run --mount \
+# type=bind,source="$HOME/.config/piker/",target="/etc" -i -p \
+# 5993:5993 alpacamarkets/marketstore:latest
+
+root_directory: data
+listen_port: 5993
+grpc_listen_port: 5995
+log_level: debug
+queryable: true
+stop_grace_period: 0
+wal_rotate_interval: 5
+stale_threshold: 5
+enable_add: true
+enable_remove: false
+
+triggers:
+  - module: ondiskagg.so
+    on: "*/1Sec/OHLCV"
+    config:
+        # filter: "nasdaq"
+        destinations:
+            - 1Min
+            - 5Min
+            - 15Min
+            - 1H
+            - 1D
+
+  - module: stream.so
+    on: '*/*/*'
+    # config:
+    #     filter: "nasdaq"
+
+'''
+
+
+class DockerNotStarted(Exception):
+    'Prolly you dint start da daemon bruh'
+
+
+@acm
+async def open_docker(
+    url: Optional[str] = None,
+    **kwargs,
+
+) -> docker.DockerClient:
+
+    client: Optional[docker.DockerClient] = None
+    try:
+        client = docker.DockerClient(
+            base_url=url,
+            **kwargs
+        ) if url else docker.from_env(**kwargs)
+
+        yield client
+
+    except (
+        DockerException,
+        APIError,
+    ) as err:
+
+        def unpack_msg(err: Exception) -> str:
+            args = getattr(err, 'args', None)
+            if args:
+                return args
+            else:
+                return str(err)
+
+        # could be more specific so let's check if it's just perms.
+        if err.args:
+            errs = err.args
+            for err in errs:
+                msg = unpack_msg(err)
+                if 'PermissionError' in msg:
+                    raise DockerException('You dint run as root yo!')
+
+                elif 'FileNotFoundError' in msg:
+                    raise DockerNotStarted('Did you start da service sister?')
+
+        # not perms?
+        raise
+
+    finally:
+        if client:
+            client.close()
+            # client.api._custom_adapter.close()
+            for c in client.containers.list():
+                c.kill()
+
+
+@tractor.context
+async def open_marketstored(
+    ctx: tractor.Context,
+    **kwargs,
+
+) -> None:
+    '''
+    Start and supervise a marketstore instance with its config bind-mounted
+    in from the piker config directory on the system.
+
+    The equivalent cli cmd to this code is:
+
+        sudo docker run --mount \
+        type=bind,source="$HOME/.config/piker/",target="/etc" -i -p \
+        5993:5993 alpacamarkets/marketstore:latest
+
+    '''
+    log = get_console_log('info', name=__name__)
+
+    async with open_docker() as client:
+
+        # create a mount from user's local piker config dir into container
+        config_dir_mnt = docker.types.Mount(
+            target='/etc',
+            source=config._config_dir,
+            type='bind',
+        )
+
+        # create a user config subdir where the marketstore
+        # backing filesystem database can be persisted.
+        persistent_data_dir = os.path.join(
+            config._config_dir, 'data',
+        )
+        if not os.path.isdir(persistent_data_dir):
+            os.mkdir(persistent_data_dir)
+
+        data_dir_mnt = docker.types.Mount(
+            target='/data',
+            source=persistent_data_dir,
+            type='bind',
+        )
+
+        cntr: Container = client.containers.run(
+            'alpacamarkets/marketstore:latest',
+            # do we need this for cmds?
+            # '-i',
+
+            # '-p 5993:5993',
+            ports={
+                '5993/tcp': 5993,  # jsonrpc
+                '5995/tcp': 5995,  # grpc
+            },
+            mounts=[config_dir_mnt, data_dir_mnt],
+            detach=True,
+            # stop_signal='SIGINT',
+            init=True,
+            # remove=True,
+        )
+        try:
+            seen_so_far = set()
+
+            async def process_logs_until(
+                match: str,
+                bp_on_msg: bool = False,
+            ):
+                logs = cntr.logs(stream=True)
+                for entry in logs:
+                    entry = entry.decode()
+
+                    try:
+                        record = json.loads(entry.strip())
+                    except json.JSONDecodeError:
+                        if 'Error' in entry:
+                            raise RuntimeError(entry)
+
+                    msg = record['msg']
+                    level = record['level']
+                    if msg and entry not in seen_so_far:
+                        seen_so_far.add(entry)
+                        if bp_on_msg:
+                            await tractor.breakpoint()
+                        getattr(log, level, log.error)(f'{msg}')
+
+                    # if "launching tcp listener for all services..." in msg:
+                    if match in msg:
+                        return True
+
+                    # do a checkpoint so we don't block if cancelled B)
+                    await trio.sleep(0)
+
+                return False
+
+            with trio.move_on_after(0.5):
+                found = await process_logs_until(
+                    "launching tcp listener for all services...",
+                )
+
+                if not found and cntr not in client.containers.list():
+                    raise RuntimeError(
+                        'Failed to start `marketstore` check logs deats'
+                    )
+
+            await ctx.started(cntr.id)
+
+            # block for the expected "teardown log msg"..
+            await process_logs_until('exiting...',)
+
+        except (
+            BaseException,
+            # trio.Cancelled,
+            # KeyboardInterrupt,
+        ):
+            cntr.kill('SIGINT')
+            with trio.move_on_after(0.5) as cs:
+                cs.shield = True
+                await process_logs_until('exiting...',)
+            raise
+
+        finally:
+            try:
+                cntr.wait(
+                    timeout=0.5,
+                    condition='not-running',
+                )
+            except (
+                ReadTimeout,
+                ConnectionError,
+            ):
+                cntr.kill()
+
+
+async def start_ahab(
+    service_name: str,
+    task_status: TaskStatus[trio.Event] = trio.TASK_STATUS_IGNORED,
+
+) -> None:
+    '''
+    Start a ``docker`` container supervisor with given service name.
+
+    Currently the actor calling this task should normally be started
+    with root permissions (until we decide to use something that doesn't
+    require this, like docker's rootless mode or some wrapper project) but
+    te root perms are de-escalated after the docker supervisor sub-actor
+    is started.
+
+    '''
+    cn_ready = trio.Event()
+    try:
+        async with tractor.open_nursery(
+            loglevel='runtime',
+        ) as tn:
+
+            portal = await tn.start_actor(
+                service_name,
+                enable_modules=[__name__]
+            )
+
+            # TODO: we have issues with this on teardown
+            # where ``tractor`` tries to issue ``os.kill()``
+            # and hits perms errors since the root process
+            # doesn't any longer have root perms..
+
+            # de-escalate root perms to the original user
+            # after the docker supervisor actor is spawned.
+            if config._parent_user:
+                import pwd
+                os.setuid(
+                    pwd.getpwnam(
+                        config._parent_user
+                    )[2]  # named user's uid
+                )
+
+            task_status.started(cn_ready)
+
+            async with portal.open_context(
+                open_marketstored,
+            ) as (ctx, first):
+
+                assert str(first)
+                # run till cancelled
+                await trio.sleep_forever()
+
+    # since we demoted root perms in this parent
+    # we'll get a perms error on proc cleanup in
+    # ``tractor`` nursery exit. just make sure
+    # the child is terminated and don't raise the
+    # error if so.
+
+    # TODO: we could also consider adding
+    # a ``tractor.ZombieDetected`` or something that we could raise
+    # if we find the child didn't terminate.
+    # await tractor.breakpoint()
+    except PermissionError:
+        log.warning('Failed to cancel root permsed container')
+
+    except (
+        trio.MultiError,
+    ) as err:
+        for subexc in err.exceptions:
+            if isinstance(subexc, PermissionError):
+                log.warning('Failed to cancel root perms-ed container')
+                return
+        else:
+            raise
+
+
+async def main():
+    await start_ahab()
+    await trio.sleep_forever()
+
+
+if __name__ == '__main__':
+    trio.run(main)

piker/data/_sampling.py

@@ -22,14 +22,16 @@ financial data flows.
 from __future__ import annotations
 from collections import Counter
 import time
+from typing import TYPE_CHECKING, Optional
 
 import tractor
 import trio
 from trio_typing import TaskStatus
 
-from ._sharedmem import ShmArray
 from ..log import get_logger
 
+if TYPE_CHECKING:
+    from ._sharedmem import ShmArray
 
 log = get_logger(__name__)
 
@@ -88,6 +90,7 @@ async def increment_ohlc_buffer(
 
     total_s = 0  # total seconds counted
     lowest = min(sampler.ohlcv_shms.keys())
+    lowest_shm = sampler.ohlcv_shms[lowest][0]
     ad = lowest - 0.001
 
     with trio.CancelScope() as cs:
@@ -131,10 +134,22 @@ async def increment_ohlc_buffer(
                     # write to the buffer
                     shm.push(last)
 
+            await broadcast(delay_s, shm=lowest_shm)
+
+
+async def broadcast(
+    delay_s: int,
+    shm: Optional[ShmArray] = None,
+
+) -> None:
     # broadcast the buffer index step to any subscribers for
     # a given sample period.
     subs = sampler.subscribers.get(delay_s, ())
 
+    if shm is None:
+        lowest = min(sampler.ohlcv_shms.keys())
+        shm = sampler.ohlcv_shms[lowest][0]
+
     for stream in subs:
         try:
             await stream.send({'index': shm._last.value})
@@ -145,7 +160,12 @@ async def increment_ohlc_buffer(
             log.error(
                 f'{stream._ctx.chan.uid} dropped connection'
             )
+            try:
                 subs.remove(stream)
+            except ValueError:
+                log.warning(
+                    f'{stream._ctx.chan.uid} sub already removed!?'
+                )
 
 
 @tractor.context
@@ -365,7 +385,12 @@ async def uniform_rate_send(
 
         if left_to_sleep > 0:
             with trio.move_on_after(left_to_sleep) as cs:
+                try:
                     sym, last_quote = await quote_stream.receive()
+                except trio.EndOfChannel:
+                    log.exception(f"feed for {stream} ended?")
+                    break
+
                 diff = time.time() - last_send
 
                 if not first_quote:

piker/data/_sharedmem.py

@@ -22,7 +22,6 @@ from __future__ import annotations
 from sys import byteorder
 from typing import Optional
 from multiprocessing.shared_memory import SharedMemory, _USE_POSIX
-from multiprocessing import resource_tracker as mantracker
 
 if _USE_POSIX:
     from _posixshmem import shm_unlink
@@ -30,6 +29,7 @@ if _USE_POSIX:
 import tractor
 import numpy as np
 from pydantic import BaseModel
+from numpy.lib import recfunctions as rfn
 
 from ..log import get_logger
 from ._source import base_iohlc_dtype
@@ -40,14 +40,19 @@ log = get_logger(__name__)
 
 # how  much is probably dependent on lifestyle
 _secs_in_day = int(60 * 60 * 24)
-# we try for 3 times but only on a run-every-other-day kinda week.
-_default_size = 10 * _secs_in_day
+# we try for a buncha times, but only on a run-every-other-day kinda week.
+_days_worth = 16
+_default_size = _days_worth * _secs_in_day
 # where to start the new data append index
-_rt_buffer_start = int(9*_secs_in_day)
+_rt_buffer_start = int((_days_worth - 1) * _secs_in_day)
 
 
-# Tell the "resource tracker" thing to fuck off.
-class ManTracker(mantracker.ResourceTracker):
+def cuckoff_mantracker():
+
+    from multiprocessing import resource_tracker as mantracker
+
+    # Tell the "resource tracker" thing to fuck off.
+    class ManTracker(mantracker.ResourceTracker):
         def register(self, name, rtype):
             pass
 
@@ -57,15 +62,17 @@ class ManTracker(mantracker.ResourceTracker):
         def ensure_running(self):
             pass
 
+    # "know your land and know your prey"
+    # https://www.dailymotion.com/video/x6ozzco
+    mantracker._resource_tracker = ManTracker()
+    mantracker.register = mantracker._resource_tracker.register
+    mantracker.ensure_running = mantracker._resource_tracker.ensure_running
+    # ensure_running = mantracker._resource_tracker.ensure_running
+    mantracker.unregister = mantracker._resource_tracker.unregister
+    mantracker.getfd = mantracker._resource_tracker.getfd
 
-# "know your land and know your prey"
-# https://www.dailymotion.com/video/x6ozzco
-mantracker._resource_tracker = ManTracker()
-mantracker.register = mantracker._resource_tracker.register
-mantracker.ensure_running = mantracker._resource_tracker.ensure_running
-ensure_running = mantracker._resource_tracker.ensure_running
-mantracker.unregister = mantracker._resource_tracker.unregister
-mantracker.getfd = mantracker._resource_tracker.getfd
+
+cuckoff_mantracker()
 
 
 class SharedInt:
@@ -191,7 +198,11 @@ class ShmArray:
         self._post_init: bool = False
 
         # pushing data does not write the index (aka primary key)
+        dtype = shmarr.dtype
+        if dtype.fields:
             self._write_fields = list(shmarr.dtype.fields.keys())[1:]
+        else:
+            self._write_fields = None
 
     # TODO: ringbuf api?
 
@@ -237,6 +248,48 @@ class ShmArray:
 
         return a
 
+    def ustruct(
+        self,
+        fields: Optional[list[str]] = None,
+
+        # type that all field values will be cast to
+        # in the returned view.
+        common_dtype: np.dtype = np.float,
+
+    ) -> np.ndarray:
+
+        array = self._array
+
+        if fields:
+            selection = array[fields]
+            # fcount = len(fields)
+        else:
+            selection = array
+            # fcount = len(array.dtype.fields)
+
+        # XXX: manual ``.view()`` attempt that also doesn't work.
+        # uview = selection.view(
+        #     dtype='<f16',
+        # ).reshape(-1, 4, order='A')
+
+        # assert len(selection) == len(uview)
+
+        u = rfn.structured_to_unstructured(
+            selection,
+            # dtype=float,
+            copy=True,
+        )
+
+        # unstruct = np.ndarray(u.shape, dtype=a.dtype, buffer=shm.buf)
+        # array[:] = a[:]
+        return u
+        # return ShmArray(
+        #     shmarr=u,
+        #     first=self._first,
+        #     last=self._last,
+        #     shm=self._shm
+        # )
+
     def last(
         self,
         length: int = 1,
@@ -255,6 +308,7 @@ class ShmArray:
 
         field_map: Optional[dict[str, str]] = None,
         prepend: bool = False,
+        update_first: bool = True,
         start: Optional[int] = None,
 
     ) -> int:
@@ -267,10 +321,9 @@ class ShmArray:
 
         '''
         length = len(data)
-        index = start if start is not None else self._last.value
 
         if prepend:
-            index = self._first.value - length
+            index = (start or self._first.value) - length
 
             if index < 0:
                 raise ValueError(
@@ -278,6 +331,9 @@ class ShmArray:
                     f'You have passed {abs(index)} too many datums.'
                 )
 
+        else:
+            index = start if start is not None else self._last.value
+
         end = index + length
 
         if field_map:
@@ -295,12 +351,17 @@ class ShmArray:
             # tries to access ``.array`` (which due to the index
             # overlap will be empty). Pretty sure we've fixed it now
             # but leaving this here as a reminder.
-            if prepend:
+            if prepend and update_first:
                 assert index < self._first.value
 
-            if index < self._first.value:
+            if (
+                index < self._first.value
+                and update_first
+            ):
+                assert prepend, 'prepend=True not passed but index decreased?'
                 self._first.value = index
-            else:
+
+            elif not prepend:
                 self._last.value = end
 
             self._post_init = True
@@ -336,6 +397,7 @@ class ShmArray:
                 f"Input array has unknown field(s): {only_in_theirs}"
             )
 
+    # TODO: support "silent" prepends that don't update ._first.value?
     def prepend(
         self,
         data: np.ndarray,
@@ -386,7 +448,11 @@ def open_shm_array(
         create=True,
         size=a.nbytes
     )
-    array = np.ndarray(a.shape, dtype=a.dtype, buffer=shm.buf)
+    array = np.ndarray(
+        a.shape,
+        dtype=a.dtype,
+        buffer=shm.buf
+    )
     array[:] = a[:]
     array.setflags(write=int(not readonly))
 

piker/data/_source.py

@@ -22,8 +22,7 @@ from typing import Any
 import decimal
 
 import numpy as np
-import pandas as pd
-from pydantic import BaseModel, validate_arguments
+from pydantic import BaseModel
 # from numba import from_dtype
 
 
@@ -127,11 +126,11 @@ def unpack_fqsn(fqsn: str) -> tuple[str, str, str]:
 
 
 class Symbol(BaseModel):
-    """I guess this is some kinda container thing for dealing with
+    '''
+    I guess this is some kinda container thing for dealing with
     all the different meta-data formats from brokers?
 
-    Yah, i guess dats what it izz.
-    """
+    '''
     key: str
     tick_size: float = 0.01
     lot_tick_size: float = 0.0  # "volume" precision as min step value
@@ -254,61 +253,6 @@ class Symbol(BaseModel):
         return keys
 
 
-def from_df(
-
-    df: pd.DataFrame,
-    source=None,
-    default_tf=None
-
-) -> np.recarray:
-    """Convert OHLC formatted ``pandas.DataFrame`` to ``numpy.recarray``.
-
-    """
-    df.reset_index(inplace=True)
-
-    # hackery to convert field names
-    date = 'Date'
-    if 'date' in df.columns:
-        date = 'date'
-
-    # convert to POSIX time
-    df[date] = [d.timestamp() for d in df[date]]
-
-    # try to rename from some camel case
-    columns = {
-        'Date': 'time',
-        'date': 'time',
-        'Open': 'open',
-        'High': 'high',
-        'Low': 'low',
-        'Close': 'close',
-        'Volume': 'volume',
-
-        # most feeds are providing this over sesssion anchored
-        'vwap': 'bar_wap',
-
-        # XXX: ib_insync calls this the "wap of the bar"
-        # but no clue what is actually is...
-        # https://github.com/pikers/piker/issues/119#issuecomment-729120988
-        'average': 'bar_wap',
-    }
-
-    df = df.rename(columns=columns)
-
-    for name in df.columns:
-        # if name not in base_ohlc_dtype.names[1:]:
-        if name not in base_ohlc_dtype.names:
-            del df[name]
-
-    # TODO: it turns out column access on recarrays is actually slower:
-    # https://jakevdp.github.io/PythonDataScienceHandbook/02.09-structured-data-numpy.html#RecordArrays:-Structured-Arrays-with-a-Twist
-    # it might make sense to make these structured arrays?
-    array = df.to_records(index=False)
-    _nan_to_closest_num(array)
-
-    return array
-
-
 def _nan_to_closest_num(array: np.ndarray):
     """Return interpolated values instead of NaN.
 

piker/data/cli.py

@@ -16,26 +16,34 @@
 
 """
 marketstore cli.
+
 """
-from typing import List
 from functools import partial
 from pprint import pformat
 
+from anyio_marketstore import open_marketstore_client
 import trio
 import tractor
 import click
+import numpy as np
 
 from .marketstore import (
     get_client,
-    stream_quotes,
+    # stream_quotes,
     ingest_quote_stream,
-    _url,
+    # _url,
     _tick_tbk_ids,
     mk_tbk,
 )
 from ..cli import cli
 from .. import watchlists as wl
 from ..log import get_logger
+from ._sharedmem import (
+    maybe_open_shm_array,
+)
+from ._source import (
+    base_iohlc_dtype,
+)
 
 
 log = get_logger(__name__)
@@ -49,51 +57,58 @@ log = get_logger(__name__)
 )
 @click.argument('names', nargs=-1)
 @click.pass_obj
-def ms_stream(config: dict, names: List[str], url: str):
-    """Connect to a marketstore time bucket stream for (a set of) symbols(s)
+def ms_stream(
+    config: dict,
+    names: list[str],
+    url: str,
+) -> None:
+    '''
+    Connect to a marketstore time bucket stream for (a set of) symbols(s)
     and print to console.
-    """
+
+    '''
     async def main():
-        async for quote in stream_quotes(symbols=names):
-            log.info(f"Received quote:\n{quote}")
+        # async for quote in stream_quotes(symbols=names):
+        #    log.info(f"Received quote:\n{quote}")
+        ...
 
     trio.run(main)
 
 
-@cli.command()
-@click.option(
-    '--url',
-    default=_url,
-    help='HTTP URL of marketstore instance'
-)
-@click.argument('names', nargs=-1)
-@click.pass_obj
-def ms_destroy(config: dict, names: List[str], url: str) -> None:
-    """Destroy symbol entries in the local marketstore instance.
-    """
-    async def main():
-        nonlocal names
-        async with get_client(url) as client:
-
-            if not names:
-                names = await client.list_symbols()
-
-            # default is to wipe db entirely.
-            answer = input(
-                "This will entirely wipe you local marketstore db @ "
-                f"{url} of the following symbols:\n {pformat(names)}"
-                "\n\nDelete [N/y]?\n")
-
-            if answer == 'y':
-                for sym in names:
-                    # tbk = _tick_tbk.format(sym)
-                    tbk = tuple(sym, *_tick_tbk_ids)
-                    print(f"Destroying {tbk}..")
-                    await client.destroy(mk_tbk(tbk))
-            else:
-                print("Nothing deleted.")
-
-    tractor.run(main)
+# @cli.command()
+# @click.option(
+#     '--url',
+#     default=_url,
+#     help='HTTP URL of marketstore instance'
+# )
+# @click.argument('names', nargs=-1)
+# @click.pass_obj
+# def ms_destroy(config: dict, names: list[str], url: str) -> None:
+#     """Destroy symbol entries in the local marketstore instance.
+#     """
+#     async def main():
+#         nonlocal names
+#         async with get_client(url) as client:
+# 
+#             if not names:
+#                 names = await client.list_symbols()
+# 
+#             # default is to wipe db entirely.
+#             answer = input(
+#                 "This will entirely wipe you local marketstore db @ "
+#                 f"{url} of the following symbols:\n {pformat(names)}"
+#                 "\n\nDelete [N/y]?\n")
+# 
+#             if answer == 'y':
+#                 for sym in names:
+#                     # tbk = _tick_tbk.format(sym)
+#                     tbk = tuple(sym, *_tick_tbk_ids)
+#                     print(f"Destroying {tbk}..")
+#                     await client.destroy(mk_tbk(tbk))
+#             else:
+#                 print("Nothing deleted.")
+# 
+#     tractor.run(main)
 
 
 @cli.command()
@@ -102,41 +117,53 @@ def ms_destroy(config: dict, names: List[str], url: str) -> None:
     is_flag=True,
     help='Enable tractor logging')
 @click.option(
-    '--url',
-    default=_url,
-    help='HTTP URL of marketstore instance'
+    '--host',
+    default='localhost'
 )
-@click.argument('name', nargs=1, required=True)
+@click.option(
+    '--port',
+    default=5993
+)
+@click.argument('symbols', nargs=-1)
 @click.pass_obj
-def ms_shell(config, name, tl, url):
-    """Start an IPython shell ready to query the local marketstore db.
-    """
-    async def main():
-        async with get_client(url) as client:
-            query = client.query  # noqa
-            # TODO: write magics to query marketstore
-            from IPython import embed
-            embed()
+def storesh(
+    config,
+    tl,
+    host,
+    port,
+    symbols: list[str],
+):
+    '''
+    Start an IPython shell ready to query the local marketstore db.
 
-    tractor.run(main)
+    '''
+    from piker.data.marketstore import tsdb_history_update
+    from piker._daemon import open_piker_runtime
+
+    async def main():
+        nonlocal symbols
+
+        async with open_piker_runtime(
+            'storesh',
+            enable_modules=['piker.data._ahab'],
+        ):
+            symbol = symbols[0]
+            await tsdb_history_update(symbol)
+
+    trio.run(main)
 
 
 @cli.command()
 @click.option('--test-file', '-t', help='Test quote stream file')
 @click.option('--tl', is_flag=True, help='Enable tractor logging')
-@click.option('--tl', is_flag=True, help='Enable tractor logging')
-@click.option(
-    '--url',
-    default=_url,
-    help='HTTP URL of marketstore instance'
-)
 @click.argument('name', nargs=1, required=True)
 @click.pass_obj
-def ingest(config, name, test_file, tl, url):
-    """Ingest real-time broker quotes and ticks to a marketstore instance.
-    """
+def ingest(config, name, test_file, tl):
+    '''
+    Ingest real-time broker quotes and ticks to a marketstore instance.
+
+    '''
     # global opts
-    brokermod = config['brokermod']
     loglevel = config['loglevel']
     tractorloglevel = config['tractorloglevel']
     # log = config['log']
@@ -145,15 +172,25 @@ def ingest(config, name, test_file, tl, url):
     watchlists = wl.merge_watchlist(watchlist_from_file, wl._builtins)
     symbols = watchlists[name]
 
-    tractor.run(
-        partial(
+    grouped_syms = {}
+    for sym in symbols:
+        symbol, _, provider = sym.rpartition('.')
+        if provider not in grouped_syms:
+            grouped_syms[provider] = []
+
+        grouped_syms[provider].append(symbol)
+
+    async def entry_point():
+        async with tractor.open_nursery() as n:
+            for provider, symbols in grouped_syms.items(): 
+                await n.run_in_actor(
                     ingest_quote_stream,
-            symbols,
-            brokermod.name,
-            tries=1,
-            loglevel=loglevel,
-        ),
                     name='ingest_marketstore',
-        loglevel=tractorloglevel,
-        debug_mode=True,
+                    symbols=symbols,
+                    brokername=provider,
+                    tries=1,
+                    actorloglevel=loglevel,
+                    loglevel=tractorloglevel
                 )
+
+    tractor.run(entry_point)

piker/data/feed.py

@@ -20,7 +20,9 @@ Data feed apis and infra.
 This module is enabled for ``brokerd`` daemons.
 
 """
+from __future__ import annotations
 from dataclasses import dataclass, field
+from datetime import datetime
 from contextlib import asynccontextmanager
 from functools import partial
 from types import ModuleType
@@ -35,12 +37,15 @@ from trio.abc import ReceiveChannel
 from trio_typing import TaskStatus
 import tractor
 from pydantic import BaseModel
+import pendulum
+import numpy as np
 
 from ..brokers import get_brokermod
 from .._cacheables import maybe_open_context
 from ..log import get_logger, get_console_log
 from .._daemon import (
     maybe_spawn_brokerd,
+    check_for_service,
 )
 from ._sharedmem import (
     maybe_open_shm_array,
@@ -56,11 +61,16 @@ from ._source import (
 from ..ui import _search
 from ._sampling import (
     sampler,
+    broadcast,
     increment_ohlc_buffer,
     iter_ohlc_periods,
     sample_and_broadcast,
     uniform_rate_send,
 )
+from ..brokers._util import (
+    NoData,
+    DataUnavailable,
+)
 
 
 log = get_logger(__name__)
@@ -124,7 +134,7 @@ class _FeedsBus(BaseModel):
 
     # def cancel_task(
     #     self,
-    #     task: trio.lowlevel.Task
+    #     task: trio.lowlevel.Task,
     # ) -> bool:
     #     ...
 
@@ -188,6 +198,129 @@ async def _setup_persistent_brokerd(
         await trio.sleep_forever()
 
 
+def diff_history(
+    array,
+    start_dt,
+    end_dt,
+    last_tsdb_dt: Optional[datetime] = None
+
+) -> np.ndarray:
+
+    if last_tsdb_dt:
+        s_diff = (start_dt - last_tsdb_dt).seconds
+
+        to_push = array[:s_diff]
+
+        # if we detect a partial frame's worth of data
+        # that is new, slice out only that history and
+        # write to shm.
+        if abs(s_diff) < len(array):
+            log.info(
+                f'Pushing partial frame {to_push.size} to shm'
+            )
+            # assert last_tsdb_dt > start_dt
+            # selected = array['time'] > last_tsdb_dt.timestamp()
+            # to_push = array[selected]
+            # return to_push
+
+        return to_push
+
+    else:
+        return array
+
+
+async def start_backfill(
+    mod: ModuleType,
+    bfqsn: str,
+    shm: ShmArray,
+
+    last_tsdb_dt: Optional[datetime] = None,
+
+    task_status: TaskStatus[trio.CancelScope] = trio.TASK_STATUS_IGNORED,
+
+) -> int:
+
+    async with mod.open_history_client(bfqsn) as hist:
+
+        # get latest query's worth of history all the way
+        # back to what is recorded in the tsdb
+        array, start_dt, end_dt = await hist(end_dt=None)
+
+        to_push = diff_history(
+            array,
+            start_dt,
+            end_dt,
+            last_tsdb_dt=last_tsdb_dt,
+        )
+
+        log.info(f'Pushing {to_push.size} to shm!')
+        shm.push(to_push)
+
+        for delay_s in sampler.subscribers:
+            await broadcast(delay_s)
+
+        bf_done = trio.Event()
+        # let caller unblock and deliver latest history frame
+        task_status.started((shm, start_dt, end_dt, bf_done))
+
+        if last_tsdb_dt is None:
+            # maybe a better default (they don't seem to define epoch?!)
+            last_tsdb_dt = pendulum.now().subtract(days=1)
+
+        # pull new history frames until we hit latest
+        # already in the tsdb or a max count.
+        # mx_fills = 16
+        count = 0
+        # while True:
+        while (
+            end_dt > last_tsdb_dt
+            # and count < mx_fills
+        ):
+            count += 1
+            try:
+                array, start_dt, end_dt = await hist(end_dt=start_dt)
+
+            except NoData:
+                # decrement by the diff in time last delivered.
+                end_dt = start_dt.subtract(seconds=(end_dt - start_dt).seconds)
+                continue
+
+            except DataUnavailable:
+                # broker is being a bish and we can't pull
+                # any more..
+                break
+
+            to_push = diff_history(
+                array,
+                start_dt,
+                end_dt,
+
+                last_tsdb_dt=last_tsdb_dt,
+                # XXX: hacky, just run indefinitely
+                # last_tsdb_dt=None,
+            )
+            print(f"PULLING {count}")
+            log.info(f'Pushing {to_push.size} to shm!')
+
+            if to_push.size < 1:
+                break
+
+            # bail on shm allocation overrun
+            try:
+                shm.push(to_push, prepend=True)
+            except ValueError:
+                await tractor.breakpoint()
+                break
+
+            for delay_s in sampler.subscribers:
+                await broadcast(delay_s)
+
+        bf_done.set()
+        # update start index to include all tsdb history
+        # that was pushed in the caller parent task.
+        # shm._first.value = 0
+
+
 async def manage_history(
     mod: ModuleType,
     bus: _FeedsBus,
@@ -216,14 +349,154 @@ async def manage_history(
         # we expect the sub-actor to write
         readonly=False,
     )
+    # TODO: history validation
+    if not opened:
+        raise RuntimeError(
+            "Persistent shm for sym was already open?!"
+        )
 
-    if opened:
+    log.info('Scanning for existing `marketstored`')
+
+    is_up = await check_for_service('marketstored')
+
+    # for now only do backfilling if no tsdb can be found
+    do_legacy_backfill = not is_up and opened
+
+    bfqsn = fqsn.replace('.' + mod.name, '')
+    open_history_client = getattr(mod, 'open_history_client', None)
+
+    if is_up and opened and open_history_client:
+
+        log.info('Found existing `marketstored`')
+        from . import marketstore
+        async with marketstore.open_storage_client(
+            fqsn,
+        ) as storage:
+
+            # TODO: this should be used verbatim for the pure
+            # shm backfiller approach below.
+
+            # start history anal and load missing new data via backend.
+            series, first_dt, last_dt = await storage.load(fqsn)
+
+            broker, symbol, expiry = unpack_fqsn(fqsn)
+            (
+                shm,
+                latest_start_dt,
+                latest_end_dt,
+                bf_done,
+            ) = await bus.nursery.start(
+                partial(
+                    start_backfill,
+                    mod,
+                    bfqsn,
+                    shm,
+                    last_tsdb_dt=last_dt,
+                )
+            )
+            task_status.started(shm)
+            some_data_ready.set()
+
+            await bf_done.wait()
+            # do diff against last start frame of history and only fill
+            # in from the tsdb an allotment that allows for most recent
+            # to be loaded into mem *before* tsdb data.
+            if last_dt:
+                dt_diff_s = (latest_start_dt - last_dt).seconds
+            else:
+                dt_diff_s = 0
+
+            # await trio.sleep_forever()
+            # TODO: see if there's faster multi-field reads:
+            # https://numpy.org/doc/stable/user/basics.rec.html#accessing-multiple-fields
+            # re-index  with a `time` and index field
+            prepend_start = shm._first.value
+
+            # sanity check on most-recent-data loading
+            assert prepend_start > dt_diff_s
+
+            history = list(series.values())
+            if history:
+                fastest = history[0]
+                to_push = fastest[:prepend_start]
+
+                shm.push(
+                    to_push,
+
+                    # insert the history pre a "days worth" of samples
+                    # to leave some real-time buffer space at the end.
+                    prepend=True,
+                    # update_first=False,
+                    # start=prepend_start,
+                    field_map={
+                        'Epoch': 'time',
+                        'Open': 'open',
+                        'High': 'high',
+                        'Low': 'low',
+                        'Close': 'close',
+                        'Volume': 'volume',
+                    },
+                )
+
+                # load as much from storage into shm as spacec will
+                # allow according to user's shm size settings.
+                count = 0
+                end = fastest['Epoch'][0]
+
+                while shm._first.value > 0:
+                    count += 1
+                    series = await storage.read_ohlcv(
+                        fqsn,
+                        end=end,
+                    )
+                    history = list(series.values())
+                    fastest = history[0]
+                    end = fastest['Epoch'][0]
+                    prepend_start -= len(to_push)
+                    to_push = fastest[:prepend_start]
+
+                    shm.push(
+                        to_push,
+
+                        # insert the history pre a "days worth" of samples
+                        # to leave some real-time buffer space at the end.
+                        prepend=True,
+                        # update_first=False,
+                        # start=prepend_start,
+                        field_map={
+                            'Epoch': 'time',
+                            'Open': 'open',
+                            'High': 'high',
+                            'Low': 'low',
+                            'Close': 'close',
+                            'Volume': 'volume',
+                        },
+                    )
+                    for delay_s in sampler.subscribers:
+                        await broadcast(delay_s)
+
+                    if count > 6:
+                        break
+
+                log.info(f'Loaded {to_push.shape} datums from storage')
+
+                # TODO: write new data to tsdb to be ready to for next read.
+
+    if do_legacy_backfill:
+        # do a legacy incremental backfill from the provider.
         log.info('No existing `marketstored` found..')
 
         # start history backfill task ``backfill_bars()`` is
         # a required backend func this must block until shm is
         # filled with first set of ohlc bars
-        _ = await bus.nursery.start(mod.backfill_bars, fqsn, shm)
+        await bus.nursery.start(
+            partial(
+                start_backfill,
+                mod,
+                bfqsn,
+                shm,
+            )
+        )
 
         # yield back after client connect with filled shm
         task_status.started(shm)
@@ -233,33 +506,20 @@ async def manage_history(
         # data that can be used.
         some_data_ready.set()
 
-    # detect sample step size for sampled historical data
-    times = shm.array['time']
-    delay_s = times[-1] - times[times != times[-1]][-1]
-
-    # begin real-time updates of shm and tsb once the feed
-    # goes live.
-    await feed_is_live.wait()
-
-    if opened:
-        sampler.ohlcv_shms.setdefault(delay_s, []).append(shm)
-
-        # start shm incrementing for OHLC sampling at the current
-        # detected sampling period if one dne.
-        if sampler.incrementers.get(delay_s) is None:
-            await bus.start_task(
-                increment_ohlc_buffer,
-                delay_s,
-            )
-
+    # history retreival loop depending on user interaction and thus
+    # a small RPC-prot for remotely controllinlg what data is loaded
+    # for viewing.
     await trio.sleep_forever()
 
 
 async def allocate_persistent_feed(
     bus: _FeedsBus,
+
     brokername: str,
     symbol: str,
+
     loglevel: str,
+    start_stream: bool = True,
 
     task_status: TaskStatus[trio.CancelScope] = trio.TASK_STATUS_IGNORED,
 
@@ -277,6 +537,7 @@ async def allocate_persistent_feed(
     - a real-time streaming task which connec
 
     '''
+    # load backend module
     try:
         mod = get_brokermod(brokername)
     except ImportError:
@@ -319,7 +580,7 @@ async def allocate_persistent_feed(
         manage_history,
         mod,
         bus,
-        bfqsn,
+        '.'.join((bfqsn, brokername)),
         some_data_ready,
         feed_is_live,
     )
@@ -333,7 +594,10 @@ async def allocate_persistent_feed(
     # true fqsn
     fqsn = '.'.join((bfqsn, brokername))
     # add a fqsn entry that includes the ``.<broker>`` suffix
+    # and an entry that includes the broker-specific fqsn (including
+    # any new suffixes or elements as injected by the backend).
     init_msg[fqsn] = msg
+    init_msg[bfqsn] = msg
 
     # TODO: pretty sure we don't need this? why not just leave 1s as
     # the fastest "sample period" since we'll probably always want that
@@ -347,13 +611,14 @@ async def allocate_persistent_feed(
     await some_data_ready.wait()
 
     # append ``.<broker>`` suffix to each quote symbol
-    bsym = symbol + f'.{brokername}'
+    acceptable_not_fqsn_with_broker_suffix = symbol + f'.{brokername}'
+
     generic_first_quotes = {
-        bsym: first_quote,
+        acceptable_not_fqsn_with_broker_suffix: first_quote,
         fqsn: first_quote,
     }
 
-    bus.feeds[symbol] = bus.feeds[fqsn] = (
+    bus.feeds[symbol] = bus.feeds[bfqsn] = (
         init_msg,
         generic_first_quotes,
     )
@@ -363,9 +628,25 @@ async def allocate_persistent_feed(
     # task_status.started((init_msg,  generic_first_quotes))
     task_status.started()
 
-    # backend will indicate when real-time quotes have begun.
+    if not start_stream:
+        await trio.sleep_forever()
+
+    # begin real-time updates of shm and tsb once the feed goes live and
+    # the backend will indicate when real-time quotes have begun.
     await feed_is_live.wait()
 
+    # start shm incrementer task for OHLC style sampling
+    # at the current detected step period.
+    times = shm.array['time']
+    delay_s = times[-1] - times[times != times[-1]][-1]
+
+    sampler.ohlcv_shms.setdefault(delay_s, []).append(shm)
+    if sampler.incrementers.get(delay_s) is None:
+        await bus.start_task(
+            increment_ohlc_buffer,
+            delay_s,
+        )
+
     sum_tick_vlm: bool = init_msg.get(
         'shm_write_opts', {}
     ).get('sum_tick_vlm', True)
@@ -388,7 +669,7 @@ async def open_feed_bus(
 
     ctx: tractor.Context,
     brokername: str,
-    symbol: str,
+    symbol: str,  # normally expected to the broker-specific fqsn
     loglevel: str,
     tick_throttle:  Optional[float] = None,
     start_stream: bool = True,
@@ -410,7 +691,9 @@ async def open_feed_bus(
     # TODO: check for any stale shm entries for this symbol
     # (after we also group them in a nice `/dev/shm/piker/` subdir).
     # ensure we are who we think we are
-    assert 'brokerd' in tractor.current_actor().name
+    servicename = tractor.current_actor().name
+    assert 'brokerd' in servicename
+    assert brokername in servicename
 
     bus = get_feed_bus(brokername)
 
@@ -420,7 +703,7 @@ async def open_feed_bus(
     entry = bus.feeds.get(symbol)
     if entry is None:
         # allocate a new actor-local stream bus which
-        # will persist for this `brokerd`.
+        # will persist for this `brokerd`'s service lifetime.
         async with bus.task_lock:
             await bus.nursery.start(
                 partial(
@@ -428,13 +711,12 @@ async def open_feed_bus(
 
                     bus=bus,
                     brokername=brokername,
-
                     # here we pass through the selected symbol in native
                     # "format" (i.e. upper vs. lowercase depending on
                     # provider).
                     symbol=symbol,
-
                     loglevel=loglevel,
+                    start_stream=start_stream,
                 )
             )
             # TODO: we can remove this?
@@ -450,7 +732,7 @@ async def open_feed_bus(
     # true fqsn
     fqsn = '.'.join([bfqsn, brokername])
     assert fqsn in first_quotes
-    assert bus.feeds[fqsn]
+    assert bus.feeds[bfqsn]
 
     # broker-ambiguous symbol (provided on cli - eg. mnq.globex.ib)
     bsym = symbol + f'.{brokername}'

piker/data/marketstore.py

@@ -14,36 +14,60 @@
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
-"""
+'''
 ``marketstore`` integration.
 
 - client management routines
 - ticK data ingest routines
 - websocket client for subscribing to write triggers
 - todo: tick sequence stream-cloning for testing
-- todo: docker container management automation
-"""
-from contextlib import asynccontextmanager
-from typing import Dict, Any, List, Callable, Tuple
+
+'''
+from contextlib import asynccontextmanager as acm
+from datetime import datetime
+from pprint import pformat
+from typing import (
+    Any,
+    Optional,
+    Union,
+)
 import time
 from math import isnan
 
+from bidict import bidict
 import msgpack
+import pyqtgraph as pg
 import numpy as np
 import pandas as pd
-import pymarketstore as pymkts
 import tractor
 from trio_websocket import open_websocket_url
+from anyio_marketstore import (
+    open_marketstore_client,
+    MarketstoreClient,
+    Params,
+)
+import pendulum
+import purerpc
 
+from .feed import maybe_open_feed
 from ..log import get_logger, get_console_log
-from ..data import open_feed
 
 
 log = get_logger(__name__)
 
-_tick_tbk_ids: Tuple[str, str] = ('1Sec', 'TICK')
+_tick_tbk_ids: tuple[str, str] = ('1Sec', 'TICK')
 _tick_tbk: str = '{}/' + '/'.join(_tick_tbk_ids)
-_url: str = 'http://localhost:5993/rpc'
+
+_tick_dt = [
+    # these two are required for as a "primary key"
+    ('Epoch', 'i8'),
+    ('Nanoseconds', 'i4'),
+    ('IsTrade', 'i1'),
+    ('IsBid', 'i1'),
+    ('Price', 'f4'),
+    ('Size', 'f4')
+]
+
 _quote_dt = [
     # these two are required for as a "primary key"
     ('Epoch', 'i8'),
@@ -61,6 +85,7 @@ _quote_dt = [
     # ('brokerd_ts', 'i64'),
     # ('VWAP', 'f4')
 ]
+
 _quote_tmp = {}.fromkeys(dict(_quote_dt).keys(), np.nan)
 _tick_map = {
     'Up': 1,
@@ -69,28 +94,39 @@ _tick_map = {
     None: np.nan,
 }
 
+_ohlcv_dt = [
+    # these two are required for as a "primary key"
+    ('Epoch', 'i8'),
+    # ('Nanoseconds', 'i4'),
 
-class MarketStoreError(Exception):
-    "Generic marketstore client error"
+    # ohlcv sampling
+    ('Open', 'f4'),
+    ('High', 'f4'),
+    ('Low', 'i8'),
+    ('Close', 'i8'),
+    ('Volume', 'f4'),
+]
 
 
-def err_on_resp(response: dict) -> None:
-    """Raise any errors found in responses from client request.
-    """
-    responses = response['responses']
-    if responses is not None:
-        for r in responses:
-            err = r['error']
-            if err:
-                raise MarketStoreError(err)
+def mk_tbk(keys: tuple[str, str, str]) -> str:
+    '''
+    Generate a marketstore table key from a tuple.
+    Converts,
+        ``('SPY', '1Sec', 'TICK')`` -> ``"SPY/1Sec/TICK"```
+
+    '''
+    return '/'.join(keys)
 
 
 def quote_to_marketstore_structarray(
-    quote: Dict[str, Any],
-    last_fill: str,
+    quote: dict[str, Any],
+    last_fill: Optional[float]
+
 ) -> np.array:
-    """Return marketstore writeable structarray from quote ``dict``.
-    """
+    '''
+    Return marketstore writeable structarray from quote ``dict``.
+
+    '''
     if last_fill:
         # new fill bby
         now = timestamp(last_fill)
@@ -101,7 +137,7 @@ def quote_to_marketstore_structarray(
 
     secs, ns = now / 10**9, now % 10**9
 
-    # pack into List[Tuple[str, Any]]
+    # pack into list[tuple[str, Any]]
     array_input = []
 
     # insert 'Epoch' entry first and then 'Nanoseconds'.
@@ -123,146 +159,426 @@ def quote_to_marketstore_structarray(
     return np.array([tuple(array_input)], dtype=_quote_dt)
 
 
-def timestamp(datestr: str) -> int:
-    """Return marketstore compatible 'Epoch' integer in nanoseconds
+def timestamp(date, **kwargs) -> int:
+    '''
+    Return marketstore compatible 'Epoch' integer in nanoseconds
     from a date formatted str.
-    """
-    return int(pd.Timestamp(datestr).value)
+
+    '''
+    return int(pd.Timestamp(date, **kwargs).value)
 
 
-def mk_tbk(keys: Tuple[str, str, str]) -> str:
-    """Generate a marketstore table key from a tuple.
-
-    Converts,
-        ``('SPY', '1Sec', 'TICK')`` -> ``"SPY/1Sec/TICK"```
-    """
-    return '{}/' + '/'.join(keys)
-
-
-class Client:
-    """Async wrapper around the alpaca ``pymarketstore`` sync client.
-
-    This will server as the shell for building out a proper async client
-    that isn't horribly documented and un-tested..
-    """
-    def __init__(self, url: str):
-        self._client = pymkts.Client(url)
-
-    async def _invoke(
-        self,
-        meth: Callable,
-        *args,
-        **kwargs,
-    ) -> Any:
-        return err_on_resp(meth(*args, **kwargs))
-
-    async def destroy(
-        self,
-        tbk: Tuple[str, str, str],
-    ) -> None:
-        return await self._invoke(self._client.destroy, mk_tbk(tbk))
-
-    async def list_symbols(
-        self,
-        tbk: str,
-    ) -> List[str]:
-        return await self._invoke(self._client.list_symbols, mk_tbk(tbk))
-
-    async def write(
-        self,
-        symbol: str,
-        array: np.ndarray,
-    ) -> None:
-        start = time.time()
-        await self._invoke(
-            self._client.write,
-            array,
-            _tick_tbk.format(symbol),
-            isvariablelength=True
-        )
-        log.debug(f"{symbol} write time (s): {time.time() - start}")
-
-    def query(
-        self,
-        symbol,
-        tbk: Tuple[str, str] = _tick_tbk_ids,
-    ) -> pd.DataFrame:
-        # XXX: causes crash
-        # client.query(pymkts.Params(symbol, '*', 'OHCLV'
-        result = self._client.query(
-            pymkts.Params(symbol, *tbk),
-        )
-        return result.first().df()
-
-
-@asynccontextmanager
+@acm
 async def get_client(
-    url: str = _url,
-) -> Client:
-    yield Client(url)
+    host: str = 'localhost',
+    port: int = 5995
+
+) -> MarketstoreClient:
+    '''
+    Load a ``anyio_marketstore`` grpc client connected
+    to an existing ``marketstore`` server.
+
+    '''
+    async with open_marketstore_client(
+        host,
+        port
+    ) as client:
+        yield client
+
+
+class MarketStoreError(Exception):
+    "Generic marketstore client error"
+
+
+# def err_on_resp(response: dict) -> None:
+#     """Raise any errors found in responses from client request.
+#     """
+#     responses = response['responses']
+#     if responses is not None:
+#         for r in responses:
+#             err = r['error']
+#             if err:
+#                 raise MarketStoreError(err)
+
+
+tf_in_1s = bidict({
+    1: '1Sec',
+    60: '1Min',
+    60*5: '5Min',
+    60*15: '15Min',
+    60*30: '30Min',
+    60*60: '1H',
+    60*60*24: '1D',
+})
+
+
+class Storage:
+    '''
+    High level storage api for both real-time and historical ingest.
+
+    '''
+    def __init__(
+        self,
+        client: MarketstoreClient,
+
+    ) -> None:
+        # TODO: eventually this should be an api/interface type that
+        # ensures we can support multiple tsdb backends.
+        self.client = client
+
+        # series' cache from tsdb reads
+        self._arrays: dict[str, np.ndarray] = {}
+
+    async def list_keys(self) -> list[str]:
+        return await self.client.list_symbols()
+
+    async def search_keys(self, pattern: str) -> list[str]:
+        '''
+        Search for time series key in the storage backend.
+
+        '''
+        ...
+
+    async def write_ticks(self, ticks: list) -> None:
+        ...
+
+    async def load(
+        self,
+        fqsn: str,
+
+    ) -> tuple[
+        dict[int, np.ndarray],  # timeframe (in secs) to series
+        Optional[datetime],  # first dt
+        Optional[datetime],  # last dt
+    ]:
+
+        first_tsdb_dt, last_tsdb_dt = None, None
+        tsdb_arrays = await self.read_ohlcv(fqsn)
+        log.info(f'Loaded tsdb history {tsdb_arrays}')
+
+        if tsdb_arrays:
+            fastest = list(tsdb_arrays.values())[0]
+            times = fastest['Epoch']
+            first, last = times[0], times[-1]
+            first_tsdb_dt, last_tsdb_dt = map(
+                pendulum.from_timestamp, [first, last]
+            )
+
+        return tsdb_arrays, first_tsdb_dt, last_tsdb_dt
+
+    async def read_ohlcv(
+        self,
+        fqsn: str,
+        timeframe: Optional[Union[int, str]] = None,
+        end: Optional[int] = None,
+
+    ) -> tuple[
+        MarketstoreClient,
+        Union[dict, np.ndarray]
+    ]:
+        client = self.client
+        syms = await client.list_symbols()
+
+        if fqsn not in syms:
+            return {}
+
+        tfstr = tf_in_1s[1]
+
+        params = Params(
+            symbols=fqsn,
+            timeframe=tfstr,
+            attrgroup='OHLCV',
+            end=end,
+            # limit_from_start=True,
+
+            # TODO: figure the max limit here given the
+            # ``purepc`` msg size limit of purerpc: 33554432
+            limit=int(800e3),
+        )
+
+        if timeframe is None:
+            log.info(f'starting {fqsn} tsdb granularity scan..')
+            # loop through and try to find highest granularity
+            for tfstr in tf_in_1s.values():
+                try:
+                    log.info(f'querying for {tfstr}@{fqsn}')
+                    params.set('timeframe', tfstr)
+                    result = await client.query(params)
+                    break
+
+                except purerpc.grpclib.exceptions.UnknownError:
+                    # XXX: this is already logged by the container and
+                    # thus shows up through `marketstored` logs relay.
+                    # log.warning(f'{tfstr}@{fqsn} not found')
+                    continue
+            else:
+                return {}
+
+        else:
+            result = await client.query(params)
+
+        # TODO: it turns out column access on recarrays is actually slower:
+        # https://jakevdp.github.io/PythonDataScienceHandbook/02.09-structured-data-numpy.html#RecordArrays:-Structured-Arrays-with-a-Twist
+        # it might make sense to make these structured arrays?
+        # Fill out a `numpy` array-results map
+        arrays = {}
+        for fqsn, data_set in result.by_symbols().items():
+            arrays.setdefault(fqsn, {})[
+                tf_in_1s.inverse[data_set.timeframe]
+            ] = data_set.array
+
+        return arrays[fqsn][timeframe] if timeframe else arrays[fqsn]
+
+    async def delete_ts(
+        self,
+        key: str,
+        timeframe: Optional[Union[int, str]] = None,
+
+    ) -> bool:
+
+        client = self.client
+        syms = await client.list_symbols()
+        print(syms)
+        # if key not in syms:
+        #     raise KeyError(f'`{fqsn}` table key not found?')
+
+        return await client.destroy(tbk=key)
+
+    async def write_ohlcv(
+        self,
+        fqsn: str,
+        ohlcv: np.ndarray,
+        append_and_duplicate: bool = True,
+
+    ) -> None:
+        # build mkts schema compat array for writing
+        mkts_dt = np.dtype(_ohlcv_dt)
+        mkts_array = np.zeros(
+            len(ohlcv),
+            dtype=mkts_dt,
+        )
+        # copy from shm array (yes it's this easy):
+        # https://numpy.org/doc/stable/user/basics.rec.html#assignment-from-other-structured-arrays
+        mkts_array[:] = ohlcv[[
+            'time',
+            'open',
+            'high',
+            'low',
+            'close',
+            'volume',
+        ]]
+
+        # write to db
+        resp = await self.client.write(
+            mkts_array,
+            tbk=f'{fqsn}/1Sec/OHLCV',
+
+            # NOTE: will will append duplicates
+            # for the same timestamp-index.
+            # TODO: pre deduplicate?
+            isvariablelength=append_and_duplicate,
+        )
+
+        log.info(
+            f'Wrote {mkts_array.size} datums to tsdb\n'
+        )
+
+        for resp in resp.responses:
+            err = resp.error
+            if err:
+                raise MarketStoreError(err)
+
+
+@acm
+async def open_storage_client(
+    fqsn: str,
+    period: Optional[Union[int, str]] = None,  # in seconds
+
+) -> tuple[Storage, dict[str, np.ndarray]]:
+    '''
+    Load a series by key and deliver in ``numpy`` struct array format.
+
+    '''
+    async with (
+        # eventually a storage backend endpoint
+        get_client() as client,
+    ):
+        # slap on our wrapper api
+        yield Storage(client)
+
+
+async def tsdb_history_update(
+    fqsn: Optional[str] = None,
+
+) -> list[str]:
+
+    # TODO: real-time dedicated task for ensuring
+    # history consistency between the tsdb, shm and real-time feed..
+
+    # update sequence design notes:
+
+    # - load existing highest frequency data from mkts
+    #   * how do we want to offer this to the UI?
+    #    - lazy loading?
+    #    - try to load it all and expect graphics caching/diffing
+    #      to  hide extra bits that aren't in view?
+
+    # - compute the diff between latest data from broker and shm
+    #   * use sql api in mkts to determine where the backend should
+    #     start querying for data?
+    #   * append any diff with new shm length
+    #   * determine missing (gapped) history by scanning
+    #   * how far back do we look?
+
+    # - begin rt update ingest and aggregation
+    #   * could start by always writing ticks to mkts instead of
+    #     worrying about a shm queue for now.
+    #   * we have a short list of shm queues worth groking:
+    #     - https://github.com/pikers/piker/issues/107
+    #   * the original data feed arch blurb:
+    #     - https://github.com/pikers/piker/issues/98
+    #
+    profiler = pg.debug.Profiler(
+        disabled=False,  # not pg_profile_enabled(),
+        delayed=False,
+    )
+
+    async with (
+        open_storage_client(fqsn) as storage,
+
+        maybe_open_feed(
+            [fqsn],
+            start_stream=False,
+
+        ) as (feed, stream),
+    ):
+        profiler(f'opened feed for {fqsn}')
+
+
+        to_append = feed.shm.array
+        to_prepend = None
+
+        if fqsn:
+            symbol = feed.symbols.get(fqsn)
+            if symbol:
+                fqsn = symbol.front_fqsn()
+
+            # diff db history with shm and only write the missing portions
+            ohlcv = feed.shm.array
+
+            # TODO: use pg profiler
+            tsdb_arrays = await storage.read_ohlcv(fqsn)
+            # hist diffing
+            if tsdb_arrays:
+                onesec = tsdb_arrays[1]
+                to_append = ohlcv[ohlcv['time'] > onesec['Epoch'][-1]]
+                to_prepend = ohlcv[ohlcv['time'] < onesec['Epoch'][0]]
+
+            profiler('Finished db arrays diffs')
+
+        syms = await storage.client.list_symbols()
+        log.info(f'Existing tsdb symbol set:\n{pformat(syms)}')
+        profiler(f'listed symbols {syms}')
+
+        # TODO: ask if user wants to write history for detected
+        # available shm buffers?
+        from tractor.trionics import ipython_embed
+        await ipython_embed()
+
+        # for array in [to_append, to_prepend]:
+        #     if array is None:
+        #         continue
+
+        #     log.info(
+        #         f'Writing datums {array.size} -> to tsdb from shm\n'
+        #     )
+        #     await storage.write_ohlcv(fqsn, array)
+
+        # profiler('Finished db writes')
 
 
 async def ingest_quote_stream(
-    symbols: List[str],
+    symbols: list[str],
     brokername: str,
     tries: int = 1,
     loglevel: str = None,
+
 ) -> None:
-    """Ingest a broker quote stream into marketstore in (sampled) tick format.
-    """
-    async with open_feed(
-        brokername,
-        symbols,
-        loglevel=loglevel,
-    ) as (first_quotes, qstream):
+    '''
+    Ingest a broker quote stream into a ``marketstore`` tsdb.
 
-        quote_cache = first_quotes.copy()
-
-        async with get_client() as ms_client:
-
-            # start ingest to marketstore
-            async for quotes in qstream:
+    '''
+    async with (
+        maybe_open_feed(brokername, symbols, loglevel=loglevel) as feed,
+        get_client() as ms_client,
+    ):
+        async for quotes in feed.stream:
             log.info(quotes)
             for symbol, quote in quotes.items():
+                for tick in quote.get('ticks', ()):
+                    ticktype = tick.get('type', 'n/a')
 
-                    # remap tick strs to ints
-                    quote['tick'] = _tick_map[quote.get('tick', 'Equal')]
+            # techtonic tick write
+            array = quote_to_marketstore_structarray({
+                'IsTrade': 1 if ticktype == 'trade' else 0,
+                'IsBid': 1 if ticktype in ('bid', 'bsize') else 0,
+                'Price': tick.get('price'),
+                'Size': tick.get('size')
+            }, last_fill=quote.get('broker_ts', None))
 
-                    # check for volume update (i.e. did trades happen
-                    # since last quote)
-                    new_vol = quote.get('volume', None)
-                    if new_vol is None:
-                        log.debug(f"No fills for {symbol}")
-                        if new_vol == quote_cache.get('volume'):
-                            # should never happen due to field diffing
-                            # on sender side
-                            log.error(
-                                f"{symbol}: got same volume as last quote?")
+            await ms_client.write(array, _tick_tbk)
 
-                    quote_cache.update(quote)
+            # LEGACY WRITE LOOP (using old tick dt)
+            # quote_cache = {
+            #     'size': 0,
+            #     'tick': 0
+            # }
 
-                    a = quote_to_marketstore_structarray(
-                        quote,
-                        # TODO: check this closer to the broker query api
-                        last_fill=quote.get('fill_time', '')
-                    )
-                    await ms_client.write(symbol, a)
+            # async for quotes in qstream:
+            #     log.info(quotes)
+            #     for symbol, quote in quotes.items():
+
+            #         # remap tick strs to ints
+            #         quote['tick'] = _tick_map[quote.get('tick', 'Equal')]
+
+            #         # check for volume update (i.e. did trades happen
+            #         # since last quote)
+            #         new_vol = quote.get('volume', None)
+            #         if new_vol is None:
+            #             log.debug(f"No fills for {symbol}")
+            #             if new_vol == quote_cache.get('volume'):
+            #                 # should never happen due to field diffing
+            #                 # on sender side
+            #                 log.error(
+            #                     f"{symbol}: got same volume as last quote?")
+
+            #         quote_cache.update(quote)
+
+            #         a = quote_to_marketstore_structarray(
+            #             quote,
+            #             # TODO: check this closer to the broker query api
+            #             last_fill=quote.get('fill_time', '')
+            #         )
+            #         await ms_client.write(symbol, a)
 
 
 async def stream_quotes(
-    symbols: List[str],
+    symbols: list[str],
     host: str = 'localhost',
     port: int = 5993,
     diff_cached: bool = True,
     loglevel: str = None,
+
 ) -> None:
-    """Open a symbol stream from a running instance of marketstore and
+    '''
+    Open a symbol stream from a running instance of marketstore and
     log to console.
-    """
+
+    '''
     # XXX: required to propagate ``tractor`` loglevel to piker logging
     get_console_log(loglevel or tractor.current_actor().loglevel)
 
-    tbks: Dict[str, str] = {sym: f"{sym}/*/*" for sym in symbols}
+    tbks: dict[str, str] = {sym: f"{sym}/*/*" for sym in symbols}
 
     async with open_websocket_url(f'ws://{host}:{port}/ws') as ws:
         # send subs topics to server
@@ -271,7 +587,7 @@ async def stream_quotes(
         )
         log.info(resp)
 
-        async def recv() -> Dict[str, Any]:
+        async def recv() -> dict[str, Any]:
             return msgpack.loads((await ws.get_message()), encoding='utf-8')
 
         streams = (await recv())['streams']

piker/fsp/_engine.py

@@ -76,7 +76,6 @@ async def filter_quotes_by_sym(
 
 async def fsp_compute(
 
-    ctx: tractor.Context,
     symbol: Symbol,
     feed: Feed,
     quote_stream: trio.abc.ReceiveChannel,
@@ -86,7 +85,7 @@ async def fsp_compute(
 
     func: Callable,
 
-    attach_stream: bool = False,
+    # attach_stream: bool = False,
     task_status: TaskStatus[None] = trio.TASK_STATUS_IGNORED,
 
 ) -> None:
@@ -127,8 +126,8 @@ async def fsp_compute(
     # each respective field.
     fields = getattr(dst.array.dtype, 'fields', None).copy()
     fields.pop('index')
-    # TODO: nptyping here!
-    history: Optional[np.ndarray] = None
+    history: Optional[np.ndarray] = None  # TODO: nptyping here!
+
     if fields and len(fields) > 1 and fields:
         if not isinstance(history_output, dict):
             raise ValueError(
@@ -193,22 +192,23 @@ async def fsp_compute(
     profiler(f'{func_name} pushed history')
     profiler.finish()
 
-    # TODO: UGH, what is the right way to do something like this?
-    if not ctx._started_called:
-        await ctx.started(index)
-
     # setup a respawn handle
     with trio.CancelScope() as cs:
+
+        # TODO: might be better to just make a "restart" method where
+        # the target task is spawned implicitly and then the event is
+        # set via some higher level api? At that poing we might as well
+        # be writing a one-cancels-one nursery though right?
         tracker = TaskTracker(trio.Event(), cs)
         task_status.started((tracker, index))
+
         profiler(f'{func_name} yield last index')
 
         # import time
         # last = time.time()
 
         try:
-            # rt stream
-            async with ctx.open_stream() as stream:
+
             async for processed in out_stream:
 
                 log.debug(f"{func_name}: {processed}")
@@ -219,8 +219,14 @@ async def fsp_compute(
                 # NOTE: for now we aren't streaming this to the consumer
                 # stream latest array index entry which basically just acts
                 # as trigger msg to tell the consumer to read from shm
-                    if attach_stream:
-                        await stream.send(index)
+                # TODO: further this should likely be implemented much
+                # like our `Feed` api where there is one background
+                # "service" task which computes output and then sends to
+                # N-consumers who subscribe for the real-time output,
+                # which we'll likely want to implement using local-mem
+                # chans for the fan out?
+                # if attach_stream:
+                #     await client_stream.send(index)
 
                 # period = time.time() - last
                 # hz = 1/period if period else float('nan')
@@ -255,7 +261,10 @@ async def cascade(
     destination shm array buffer.
 
     '''
-    profiler = pg.debug.Profiler(delayed=False, disabled=False)
+    profiler = pg.debug.Profiler(
+        delayed=False,
+        disabled=False
+    )
 
     if loglevel:
         get_console_log(loglevel)
@@ -314,7 +323,6 @@ async def cascade(
             fsp_target = partial(
 
                 fsp_compute,
-                ctx=ctx,
                 symbol=symbol,
                 feed=feed,
                 quote_stream=quote_stream,
@@ -323,7 +331,7 @@ async def cascade(
                 src=src,
                 dst=dst,
 
-                # func_name=func_name,
+                # target
                 func=func
             )
 
@@ -335,13 +343,34 @@ async def cascade(
 
             profiler(f'{func_name}: fsp up')
 
-            async def resync(tracker: TaskTracker) -> tuple[TaskTracker, int]:
+            # sync client
+            await ctx.started(index)
+
+            # XXX:  rt stream with client which we MUST
+            # open here (and keep it open) in order to make
+            # incremental "updates" as history prepends take
+            # place.
+            async with ctx.open_stream() as client_stream:
+
+                # TODO: these likely should all become
+                # methods of this ``TaskLifetime`` or wtv
+                # abstraction..
+                async def resync(
+                    tracker: TaskTracker,
+
+                ) -> tuple[TaskTracker, int]:
                     # TODO: adopt an incremental update engine/approach
                     # where possible here eventually!
                     log.warning(f're-syncing fsp {func_name} to source')
                     tracker.cs.cancel()
                     await tracker.complete.wait()
-                return await n.start(fsp_target)
+                    tracker, index = await n.start(fsp_target)
+
+                    # always trigger UI refresh after history update,
+                    # see ``piker.ui._fsp.FspAdmin.open_chain()`` and
+                    # ``piker.ui._display.trigger_update()``.
+                    await client_stream.send('update')
+                    return tracker, index
 
                 def is_synced(
                     src: ShmArray,
@@ -388,7 +417,9 @@ async def cascade(
 
                 # Increment the underlying shared memory buffer on every
                 # "increment" msg received from the underlying data feed.
-            async with feed.index_stream(int(delay_s)) as istream:
+                async with feed.index_stream(
+                    int(delay_s)
+                ) as istream:
 
                     profiler(f'{func_name}: sample stream up')
                     profiler.finish()

piker/fsp/_momo.py

@@ -167,6 +167,7 @@ def _wma(
 
     assert length == len(weights)
 
+    # lol, for long sequences this is nutso slow and expensive..
     return np.convolve(signal, weights, 'valid')
 
 

piker/fsp/_volume.py

@@ -309,7 +309,7 @@ async def flow_rates(
 
         if period > 1:
             trade_rate_wma = _wma(
-                dvlm_shm.array['trade_count'],
+                dvlm_shm.array['trade_count'][-period:],
                 period,
                 weights=weights,
             )
@@ -332,7 +332,7 @@ async def flow_rates(
 
         if period > 1:
             dark_trade_rate_wma = _wma(
-                dvlm_shm.array['dark_trade_count'],
+                dvlm_shm.array['dark_trade_count'][-period:],
                 period,
                 weights=weights,
             )

piker/ui/_anchors.py

@@ -25,39 +25,10 @@ from PyQt5.QtCore import QPointF
 from PyQt5.QtWidgets import QGraphicsPathItem
 
 if TYPE_CHECKING:
-    from ._axes import PriceAxis
     from ._chart import ChartPlotWidget
     from ._label import Label
 
 
-def marker_right_points(
-    chart: ChartPlotWidget,  # noqa
-    marker_size: int = 20,
-
-) -> (float, float, float):
-    '''
-    Return x-dimension, y-axis-aware, level-line marker oriented scene
-    values.
-
-    X values correspond to set the end of a level line, end of
-    a paried level line marker, and the right most side of the "right"
-    axis respectively.
-
-    '''
-    # TODO: compute some sensible maximum value here
-    # and use a humanized scheme to limit to that length.
-    l1_len = chart._max_l1_line_len
-    ryaxis = chart.getAxis('right')
-
-    r_axis_x = ryaxis.pos().x()
-    up_to_l1_sc = r_axis_x - l1_len - 10
-
-    marker_right = up_to_l1_sc - (1.375 * 2 * marker_size)
-    line_end = marker_right - (6/16 * marker_size)
-
-    return line_end, marker_right, r_axis_x
-
-
 def vbr_left(
     label: Label,
 

piker/ui/_annotate.py

@@ -26,8 +26,6 @@ from PyQt5.QtWidgets import QGraphicsPathItem
 from pyqtgraph import Point, functions as fn, Color
 import numpy as np
 
-from ._anchors import marker_right_points
-
 
 def mk_marker_path(
 
@@ -116,7 +114,7 @@ class LevelMarker(QGraphicsPathItem):
 
         self.get_level = get_level
         self._on_paint = on_paint
-        self.scene_x = lambda: marker_right_points(chart)[1]
+        self.scene_x = lambda: chart.marker_right_points()[1]
         self.level: float = 0
         self.keep_in_view = keep_in_view
 
@@ -169,7 +167,7 @@ class LevelMarker(QGraphicsPathItem):
         vr = view.state['viewRange']
         ymn, ymx = vr[1]
 
-        # _, marker_right, _ = marker_right_points(line._chart)
+        # _, marker_right, _ = line._chart.marker_right_points()
         x = self.scene_x()
 
         if self.style == '>|':  # short style, points "down-to" line

piker/ui/_axes.py

@@ -223,8 +223,9 @@ class DynamicDateAxis(Axis):
     ) -> List[str]:
 
         chart = self.linkedsplits.chart
-        bars = chart._arrays[chart.name]
-        shm = self.linkedsplits.chart._shm
+        flow = chart._flows[chart.name]
+        shm = flow.shm
+        bars = shm.array
         first = shm._first.value
 
         bars_len = len(bars)

piker/ui/_chart.py

@@ -1,5 +1,5 @@
 # piker: trading gear for hackers
-# Copyright (C) Tyler Goodlet (in stewardship for piker0)
+# Copyright (C) Tyler Goodlet (in stewardship for pikers)
 
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License as published by
@@ -19,10 +19,14 @@ High level chart-widget apis.
 
 '''
 from __future__ import annotations
-from typing import Optional
+from typing import Optional, TYPE_CHECKING
 
 from PyQt5 import QtCore, QtWidgets
-from PyQt5.QtCore import Qt
+from PyQt5.QtCore import (
+    Qt,
+    QLineF,
+    # QPointF,
+)
 from PyQt5.QtWidgets import (
     QFrame,
     QWidget,
@@ -33,7 +37,6 @@ from PyQt5.QtWidgets import (
 import numpy as np
 import pyqtgraph as pg
 import trio
-from pydantic import BaseModel
 
 from ._axes import (
     DynamicDateAxis,
@@ -44,6 +47,7 @@ from ._cursor import (
     Cursor,
     ContentsLabel,
 )
+from ..data._sharedmem import ShmArray
 from ._l1 import L1Labels
 from ._ohlc import BarItems
 from ._curve import FastAppendCurve
@@ -52,17 +56,18 @@ from ._style import (
     CHART_MARGINS,
     _xaxis_at,
     _min_points_to_show,
-    _bars_from_right_in_follow_mode,
-    _bars_to_left_in_follow_mode,
 )
 from ..data.feed import Feed
 from ..data._source import Symbol
-from ..data._sharedmem import ShmArray
 from ..log import get_logger
 from ._interaction import ChartView
 from ._forms import FieldsForm
+from .._profile import pg_profile_enabled, ms_slower_then
 from ._overlay import PlotItemOverlay
+from ._flows import Flow
 
+if TYPE_CHECKING:
+    from ._display import DisplayState
 
 log = get_logger(__name__)
 
@@ -230,11 +235,18 @@ class GodWidget(QWidget):
             # chart is already in memory so just focus it
             linkedsplits.show()
             linkedsplits.focus()
+            linkedsplits.graphics_cycle()
             await trio.sleep(0)
 
             # resume feeds *after* rendering chart view asap
             chart.resume_all_feeds()
 
+            # TODO: we need a check to see if the chart
+            # last had the xlast in view, if so then shift so it's
+            # still in view, if the user was viewing history then
+            # do nothing yah?
+            chart.default_view()
+
         self.linkedsplits = linkedsplits
         symbol = linkedsplits.symbol
         if symbol is not None:
@@ -346,8 +358,19 @@ class LinkedSplits(QWidget):
         self.layout.setContentsMargins(0, 0, 0, 0)
         self.layout.addWidget(self.splitter)
 
+        # chart-local graphics state that can be passed to
+        # a ``graphic_update_cycle()`` call by any task wishing to
+        # update the UI for a given "chart instance".
+        self.display_state: Optional[DisplayState] = None
+
         self._symbol: Symbol = None
 
+    def graphics_cycle(self, **kwargs) -> None:
+        from . import _display
+        ds = self.display_state
+        if ds:
+            return _display.graphics_update_cycle(ds, **kwargs)
+
     @property
     def symbol(self) -> Symbol:
         return self._symbol
@@ -362,12 +385,15 @@ class LinkedSplits(QWidget):
         '''
         ln = len(self.subplots)
 
-        if not prop:
         # proportion allocated to consumer subcharts
-            if ln < 2:
-                prop = 1/3
-            elif ln >= 2:
-                prop = 3/8
+        if not prop:
+            prop = 3/8*5/8
+
+            # if ln < 2:
+            #     prop = 3/8*5/8
+
+            # elif ln >= 2:
+            #     prop = 3/8
 
         major = 1 - prop
         min_h_ind = int((self.height() * prop) / ln)
@@ -389,7 +415,7 @@ class LinkedSplits(QWidget):
         self,
 
         symbol: Symbol,
-        array: np.ndarray,
+        shm: ShmArray,
         sidepane: FieldsForm,
 
         style: str = 'bar',
@@ -414,7 +440,7 @@ class LinkedSplits(QWidget):
         self.chart = self.add_plot(
 
             name=symbol.key,
-            array=array,
+            shm=shm,
             style=style,
             _is_main=True,
 
@@ -442,7 +468,7 @@ class LinkedSplits(QWidget):
         self,
 
         name: str,
-        array: np.ndarray,
+        shm: ShmArray,
 
         array_key: Optional[str] = None,
         style: str = 'line',
@@ -486,7 +512,6 @@ class LinkedSplits(QWidget):
             name=name,
             data_key=array_key or name,
 
-            array=array,
             parent=qframe,
             linkedsplits=self,
             axisItems=axes,
@@ -550,7 +575,7 @@ class LinkedSplits(QWidget):
 
             graphics, data_key = cpw.draw_ohlc(
                 name,
-                array,
+                shm,
                 array_key=array_key
             )
             self.cursor.contents_labels.add_label(
@@ -564,7 +589,7 @@ class LinkedSplits(QWidget):
             add_label = True
             graphics, data_key = cpw.draw_curve(
                 name,
-                array,
+                shm,
                 array_key=array_key,
                 color='default_light',
             )
@@ -573,7 +598,7 @@ class LinkedSplits(QWidget):
             add_label = True
             graphics, data_key = cpw.draw_curve(
                 name,
-                array,
+                shm,
                 array_key=array_key,
                 step_mode=True,
                 color='davies',
@@ -628,31 +653,6 @@ class LinkedSplits(QWidget):
                 cpw.sidepane.setMaximumWidth(sp_w)
 
 
-# class FlowsTable(pydantic.BaseModel):
-#     '''
-#     Data-AGGRegate: high level API onto multiple (categorized)
-#     ``Flow``s with high level processing routines for
-#     multi-graphics computations and display.
-
-#     '''
-#     flows: dict[str, np.ndarray] = {}
-
-
-class Flow(BaseModel):
-    '''
-    (FinancialSignal-)Flow compound type which wraps a real-time
-    graphics (curve) and its backing data stream together for high level
-    access and control.
-
-    '''
-    class Config:
-        arbitrary_types_allowed = True
-
-    name: str
-    plot: pg.PlotItem
-    shm: Optional[ShmArray] = None  # may be filled in "later"
-
-
 class ChartPlotWidget(pg.PlotWidget):
     '''
     ``GraphicsView`` subtype containing a single ``PlotItem``.
@@ -686,7 +686,6 @@ class ChartPlotWidget(pg.PlotWidget):
 
         # the "data view" we generate graphics from
         name: str,
-        array: np.ndarray,
         data_key: str,
         linkedsplits: LinkedSplits,
 
@@ -739,14 +738,6 @@ class ChartPlotWidget(pg.PlotWidget):
         self._max_l1_line_len: float = 0
 
         # self.setViewportMargins(0, 0, 0, 0)
-        # self._ohlc = array  # readonly view of ohlc data
-
-        # TODO: move to Aggr above XD
-        # readonly view of data arrays
-        self._arrays = {
-            self.data_key: array,
-        }
-        self._graphics = {}  # registry of underlying graphics
 
         # registry of overlay curve names
         self._flows: dict[str, Flow] = {}
@@ -762,7 +753,6 @@ class ChartPlotWidget(pg.PlotWidget):
         # show background grid
         self.showGrid(x=False, y=True, alpha=0.3)
 
-        self.default_view()
         self.cv.enable_auto_yrange()
 
         self.pi_overlay: PlotItemOverlay = PlotItemOverlay(self.plotItem)
@@ -807,47 +797,137 @@ class ChartPlotWidget(pg.PlotWidget):
         return int(vr.left()), int(vr.right())
 
     def bars_range(self) -> tuple[int, int, int, int]:
-        """Return a range tuple for the bars present in view.
-        """
-        l, r = self.view_range()
-        array = self._arrays[self.name]
-        lbar = max(l, array[0]['index'])
-        rbar = min(r, array[-1]['index'])
+        '''
+        Return a range tuple for the bars present in view.
+
+        '''
+        main_flow = self._flows[self.name]
+        ifirst, l, lbar, rbar, r, ilast = main_flow.datums_range()
         return l, lbar, rbar, r
 
+    def curve_width_pxs(
+        self,
+    ) -> float:
+        _, lbar, rbar, _ = self.bars_range()
+        return self.view.mapViewToDevice(
+            QLineF(lbar, 0, rbar, 0)
+        ).length()
+
+    def pre_l1_xs(self) -> tuple[float, float]:
+        '''
+        Return the view x-coord for the value just before
+        the L1 labels on the y-axis as well as the length
+        of that L1 label from the y-axis.
+
+        '''
+        line_end, marker_right, yaxis_x = self.marker_right_points()
+        view = self.view
+        line = view.mapToView(
+            QLineF(line_end, 0, yaxis_x, 0)
+        )
+        return line.x1(), line.length()
+
+    def marker_right_points(
+        self,
+        marker_size: int = 20,
+
+    ) -> (float, float, float):
+        '''
+        Return x-dimension, y-axis-aware, level-line marker oriented scene
+        values.
+
+        X values correspond to set the end of a level line, end of
+        a paried level line marker, and the right most side of the "right"
+        axis respectively.
+
+        '''
+        # TODO: compute some sensible maximum value here
+        # and use a humanized scheme to limit to that length.
+        l1_len = self._max_l1_line_len
+        ryaxis = self.getAxis('right')
+
+        r_axis_x = ryaxis.pos().x()
+        up_to_l1_sc = r_axis_x - l1_len - 10
+
+        marker_right = up_to_l1_sc - (1.375 * 2 * marker_size)
+        line_end = marker_right - (6/16 * marker_size)
+
+        return line_end, marker_right, r_axis_x
+
     def default_view(
         self,
-        index: int = -1,
+        bars_from_y: int = 3000,
 
     ) -> None:
         '''
         Set the view box to the "default" startup view of the scene.
 
         '''
-        try:
-            xlast = self._arrays[self.name][index]['index']
-        except IndexError:
-            log.warning(f'array for {self.name} not loaded yet?')
+        flow = self._flows.get(self.name)
+        if not flow:
+            log.warning(f'`Flow` for {self.name} not loaded yet?')
             return
 
-        begin = xlast - _bars_to_left_in_follow_mode
-        end = xlast + _bars_from_right_in_follow_mode
+        index = flow.shm.array['index']
+        xfirst, xlast = index[0], index[-1]
+        l, lbar, rbar, r = self.bars_range()
+        view = self.view
+
+        if (
+            rbar < 0
+            or l < xfirst
+            or l < 0
+            or (rbar - lbar) < 6
+        ):
+            # TODO: set fixed bars count on screen that approx includes as
+            # many bars as possible before a downsample line is shown.
+            begin = xlast - bars_from_y
+            view.setXRange(
+                min=begin,
+                max=xlast,
+                padding=0,
+            )
+            # re-get range
+            l, lbar, rbar, r = self.bars_range()
+
+        # we get the L1 spread label "length" in view coords
+        # terms now that we've scaled either by user control
+        # or to the default set of bars as per the immediate block
+        # above.
+        marker_pos, l1_len = self.pre_l1_xs()
+        end = xlast + l1_len + 1
+        begin = end - (r - l)
+
+        # for debugging
+        # print(
+        #     # f'bars range: {brange}\n'
+        #     f'xlast: {xlast}\n'
+        #     f'marker pos: {marker_pos}\n'
+        #     f'l1 len: {l1_len}\n'
+        #     f'begin: {begin}\n'
+        #     f'end: {end}\n'
+        # )
 
         # remove any custom user yrange setttings
         if self._static_yrange == 'axis':
             self._static_yrange = None
 
-        view = self.view
         view.setXRange(
             min=begin,
             max=end,
             padding=0,
         )
+        self.view.maybe_downsample_graphics()
         view._set_yrange()
+        try:
+            self.linked.graphics_cycle()
+        except IndexError:
+            pass
 
     def increment_view(
         self,
         steps: int = 1,
+        vb: Optional[ChartView] = None,
 
     ) -> None:
         """
@@ -856,7 +936,8 @@ class ChartPlotWidget(pg.PlotWidget):
 
         """
         l, r = self.view_range()
-        self.view.setXRange(
+        view = vb or self.view
+        view.setXRange(
             min=l + steps,
             max=r + steps,
 
@@ -868,7 +949,7 @@ class ChartPlotWidget(pg.PlotWidget):
     def draw_ohlc(
         self,
         name: str,
-        data: np.ndarray,
+        shm: ShmArray,
 
         array_key: Optional[str] = None,
 
@@ -878,19 +959,31 @@ class ChartPlotWidget(pg.PlotWidget):
 
         '''
         graphics = BarItems(
+            self.linked,
             self.plotItem,
-            pen_color=self.pen_color
+            pen_color=self.pen_color,
+            name=name,
         )
 
         # adds all bar/candle graphics objects for each data point in
         # the np array buffer to be drawn on next render cycle
         self.plotItem.addItem(graphics)
 
-        # draw after to allow self.scene() to work...
-        graphics.draw_from_data(data)
-
         data_key = array_key or name
-        self._graphics[data_key] = graphics
+
+        self._flows[data_key] = Flow(
+            name=name,
+            plot=self.plotItem,
+            _shm=shm,
+            is_ohlc=True,
+            graphics=graphics,
+        )
+
+        # TODO: i think we can eventually remove this if
+        # we write the ``Flow.update_graphics()`` method right?
+        # draw after to allow self.scene() to work...
+        graphics.draw_from_data(shm.array)
+
         self._add_sticky(name, bg_color='davies')
 
         return graphics, data_key
@@ -931,6 +1024,7 @@ class ChartPlotWidget(pg.PlotWidget):
         )
         pi.hideButtons()
 
+        # cv.enable_auto_yrange(self.view)
         cv.enable_auto_yrange()
 
         # compose this new plot's graphics with the current chart's
@@ -955,19 +1049,20 @@ class ChartPlotWidget(pg.PlotWidget):
         self,
 
         name: str,
-        data: np.ndarray,
+        shm: ShmArray,
 
         array_key: Optional[str] = None,
         overlay: bool = False,
         color: Optional[str] = None,
         add_label: bool = True,
+        pi: Optional[pg.PlotItem] = None,
 
         **pdi_kwargs,
 
     ) -> (pg.PlotDataItem, str):
         '''
         Draw a "curve" (line plot graphics) for the provided data in
-        the input array ``data``.
+        the input shm array ``shm``.
 
         '''
         color = color or self.pen_color or 'default_light'
@@ -978,6 +1073,7 @@ class ChartPlotWidget(pg.PlotWidget):
         data_key = array_key or name
 
         # yah, we wrote our own B)
+        data = shm.array
         curve = FastAppendCurve(
             y=data[data_key],
             x=data['index'],
@@ -988,12 +1084,6 @@ class ChartPlotWidget(pg.PlotWidget):
             # on data reads and makes graphics rendering no faster
             # clipToView=True,
 
-            # TODO: see how this handles with custom ohlcv bars graphics
-            # and/or if we can implement something similar for OHLC graphics
-            # autoDownsample=True,
-            # downsample=60,
-            # downsampleMethod='subsample',
-
             **pdi_kwargs,
         )
 
@@ -1007,11 +1097,16 @@ class ChartPlotWidget(pg.PlotWidget):
         # and is disastrous for performance.
         # curve.setCacheMode(QtWidgets.QGraphicsItem.ItemCoordinateCache)
 
-        # register curve graphics and backing array for name
-        self._graphics[name] = curve
-        self._arrays[data_key] = data
+        pi = pi or self.plotItem
 
-        pi = self.plotItem
+        self._flows[data_key] = Flow(
+            name=name,
+            plot=pi,
+            _shm=shm,
+            is_ohlc=False,
+            # register curve graphics with this flow
+            graphics=curve,
+        )
 
         # TODO: this probably needs its own method?
         if overlay:
@@ -1021,10 +1116,6 @@ class ChartPlotWidget(pg.PlotWidget):
                             f'{overlay} must be from `.plotitem_overlay()`'
                         )
                 pi = overlay
-
-            # anchor_at = ('bottom', 'left')
-            self._flows[name] = Flow(name=name, plot=pi)
-
         else:
             # anchor_at = ('top', 'left')
 
@@ -1032,7 +1123,17 @@ class ChartPlotWidget(pg.PlotWidget):
             # (we need something that avoids clutter on x-axis).
             self._add_sticky(name, bg_color=color)
 
+        # NOTE: this is more or less the RENDER call that tells Qt to
+        # start showing the generated graphics-curves. This is kind of
+        # of edge-triggered call where once added any
+        # ``QGraphicsItem.update()`` calls are automatically displayed.
+        # Our internal graphics objects have their own "update from
+        # data" style method API that allows for real-time updates on
+        # the next render cycle; just note a lot of the real-time
+        # updates are implicit and require a bit of digging to
+        # understand.
         pi.addItem(curve)
+
         return curve, data_key
 
     # TODO: make this a ctx mngr
@@ -1064,29 +1165,11 @@ class ChartPlotWidget(pg.PlotWidget):
         )
         return last
 
-    def update_ohlc_from_array(
+    def update_graphics_from_flow(
         self,
-
         graphics_name: str,
-        array: np.ndarray,
-        **kwargs,
-
-    ) -> pg.GraphicsObject:
-        '''
-        Update the named internal graphics from ``array``.
-
-        '''
-        self._arrays[self.name] = array
-        graphics = self._graphics[graphics_name]
-        graphics.update_from_array(array, **kwargs)
-        return graphics
-
-    def update_curve_from_array(
-        self,
-
-        graphics_name: str,
-        array: np.ndarray,
         array_key: Optional[str] = None,
+
         **kwargs,
 
     ) -> pg.GraphicsObject:
@@ -1094,32 +1177,12 @@ class ChartPlotWidget(pg.PlotWidget):
         Update the named internal graphics from ``array``.
 
         '''
-        assert len(array)
-        data_key = array_key or graphics_name
-
-        if graphics_name not in self._flows:
-            self._arrays[self.name] = array
-        else:
-            self._arrays[data_key] = array
-
-        curve = self._graphics[graphics_name]
-
-        # NOTE: back when we weren't implementing the curve graphics
-        # ourselves you'd have updates using this method:
-        # curve.setData(y=array[graphics_name], x=array['index'], **kwargs)
-
-        # NOTE: graphics **must** implement a diff based update
-        # operation where an internal ``FastUpdateCurve._xrange`` is
-        # used to determine if the underlying path needs to be
-        # pre/ap-pended.
-        curve.update_from_array(
-            x=array['index'],
-            y=array[data_key],
-            **kwargs
+        flow = self._flows[array_key or graphics_name]
+        return flow.update_graphics(
+            array_key=array_key,
+            **kwargs,
         )
 
-        return curve
-
     # def _label_h(self, yhigh: float, ylow: float) -> float:
     #     # compute contents label "height" in view terms
     #     # to avoid having data "contents" overlap with them
@@ -1149,6 +1212,9 @@ class ChartPlotWidget(pg.PlotWidget):
 
     #     print(f"bounds (ylow, yhigh): {(ylow, yhigh)}")
 
+    # TODO: pretty sure we can just call the cursor
+    # directly not? i don't wee why we need special "signal proxies"
+    # for this lul..
     def enterEvent(self, ev):  # noqa
         # pg.PlotWidget.enterEvent(self, ev)
         self.sig_mouse_enter.emit(self)
@@ -1162,7 +1228,7 @@ class ChartPlotWidget(pg.PlotWidget):
 
         # TODO: this should go onto some sort of
         # data-view thinger..right?
-        ohlc = self._shm.array
+        ohlc = self._flows[self.name].shm.array
 
         # XXX: not sure why the time is so off here
         # looks like we're gonna have to do some fixing..
@@ -1173,6 +1239,22 @@ class ChartPlotWidget(pg.PlotWidget):
         else:
             return ohlc['index'][-1]
 
+    def in_view(
+        self,
+        array: np.ndarray,
+
+    ) -> np.ndarray:
+        '''
+        Slice an input struct array providing only datums
+        "in view" of this chart.
+
+        '''
+        l, lbar, rbar, r = self.bars_range()
+        ifirst = array[0]['index']
+        # slice data by offset from the first index
+        # available in the passed datum set.
+        return array[lbar - ifirst:(rbar - ifirst) + 1]
+
     def maxmin(
         self,
         name: Optional[str] = None,
@@ -1185,46 +1267,35 @@ class ChartPlotWidget(pg.PlotWidget):
         If ``bars_range`` is provided use that range.
 
         '''
-        l, lbar, rbar, r = bars_range or self.bars_range()
-        # TODO: logic to check if end of bars in view
-        # extra = view_len - _min_points_to_show
-        # begin = self._arrays['ohlc'][0]['index'] - extra
-        # # end = len(self._arrays['ohlc']) - 1 + extra
-        # end = self._arrays['ohlc'][-1]['index'] - 1 + extra
-
-        # bars_len = rbar - lbar
-        # log.debug(
-        #     f"\nl: {l}, lbar: {lbar}, rbar: {rbar}, r: {r}\n"
-        #     f"view_len: {view_len}, bars_len: {bars_len}\n"
-        #     f"begin: {begin}, end: {end}, extra: {extra}"
-        # )
+        profiler = pg.debug.Profiler(
+            msg=f'`{str(self)}.maxmin()` loop cycle for: `{self.name}`',
+            disabled=not pg_profile_enabled(),
+            gt=ms_slower_then,
+            delayed=True,
+        )
 
         # TODO: here we should instead look up the ``Flow.shm.array``
         # and read directly from shm to avoid copying to memory first
         # and then reading it again here.
-        a = self._arrays.get(name or self.name)
-        if a is None:
-            return None
-
-        ifirst = a[0]['index']
-        bars = a[lbar - ifirst:(rbar - ifirst) + 1]
-
-        if not len(bars):
-            # likely no data loaded yet or extreme scrolling?
-            log.error(f"WTF bars_range = {lbar}:{rbar}")
-            return
-
+        flow_key = name or self.name
+        flow = self._flows.get(flow_key)
         if (
-            self.data_key == self.linked.symbol.key
+            flow is None
         ):
-            # ohlc sampled bars hi/lo lookup
-            ylow = np.nanmin(bars['low'])
-            yhigh = np.nanmax(bars['high'])
+            log.error(f"flow {flow_key} doesn't exist in chart {self.name} !?")
+            key = res = 0, 0
 
         else:
-            view = bars[name or self.data_key]
-            ylow = np.nanmin(view)
-            yhigh = np.nanmax(view)
+            first, l, lbar, rbar, r, last = bars_range or flow.datums_range()
+            profiler(f'{self.name} got bars range')
 
-        # print(f'{(ylow, yhigh)}')
-        return ylow, yhigh
+            key = round(lbar), round(rbar)
+            res = flow.maxmin(*key)
+            if res == (None, None):
+                log.error(
+                    f"{flow_key} no mxmn for bars_range => {key} !?"
+                )
+                res = 0, 0
+
+        profiler(f'yrange mxmn: {key} -> {res}')
+        return res

piker/ui/_compression.py

@@ -0,0 +1,379 @@
+# piker: trading gear for hackers
+# Copyright (C) Tyler Goodlet (in stewardship for pikers)
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+
+# You should have received a copy of the GNU Affero General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+'''
+Graphics related downsampling routines for compressing to pixel
+limits on the display device.
+
+'''
+import math
+from typing import Optional
+
+import numpy as np
+from numpy.lib import recfunctions as rfn
+from numba import (
+    jit,
+    # float64, optional, int64,
+)
+
+from ..log import get_logger
+
+
+log = get_logger(__name__)
+
+
+def hl2mxmn(ohlc: np.ndarray) -> np.ndarray:
+    '''
+    Convert a OHLC struct-array containing 'high'/'low' columns
+    to a "joined" max/min 1-d array.
+
+    '''
+    index = ohlc['index']
+    hls = ohlc[[
+        'low',
+        'high',
+    ]]
+
+    mxmn = np.empty(2*hls.size, dtype=np.float64)
+    x = np.empty(2*hls.size, dtype=np.float64)
+    trace_hl(hls, mxmn, x, index[0])
+    x = x + index[0]
+
+    return mxmn, x
+
+
+@jit(
+    # TODO: the type annots..
+    # float64[:](float64[:],),
+    nopython=True,
+)
+def trace_hl(
+    hl: 'np.ndarray',
+    out: np.ndarray,
+    x: np.ndarray,
+    start: int,
+
+    # the "offset" values in the x-domain which
+    # place the 2 output points around each ``int``
+    # master index.
+    margin: float = 0.43,
+
+) -> None:
+    '''
+    "Trace" the outline of the high-low values of an ohlc sequence
+    as a line such that the maximum deviation (aka disperaion) between
+    bars if preserved.
+
+    This routine is expected to modify input arrays in-place.
+
+    '''
+    last_l = hl['low'][0]
+    last_h = hl['high'][0]
+
+    for i in range(hl.size):
+        row = hl[i]
+        l, h = row['low'], row['high']
+
+        up_diff = h - last_l
+        down_diff = last_h - l
+
+        if up_diff > down_diff:
+            out[2*i + 1] = h
+            out[2*i] = last_l
+        else:
+            out[2*i + 1] = l
+            out[2*i] = last_h
+
+        last_l = l
+        last_h = h
+
+        x[2*i] = int(i) - margin
+        x[2*i + 1] = int(i) + margin
+
+    return out
+
+
+def ohlc_flatten(
+    ohlc: np.ndarray,
+    use_mxmn: bool = True,
+
+) -> tuple[np.ndarray, np.ndarray]:
+    '''
+    Convert an OHLCV struct-array into a flat ready-for-line-plotting
+    1-d array that is 4 times the size with x-domain values distributed
+    evenly (by 0.5 steps) over each index.
+
+    '''
+    index = ohlc['index']
+
+    if use_mxmn:
+        # traces a line optimally over highs to lows
+        # using numba. NOTE: pretty sure this is faster
+        # and looks about the same as the below output.
+        flat, x = hl2mxmn(ohlc)
+
+    else:
+        flat = rfn.structured_to_unstructured(
+            ohlc[['open', 'high', 'low', 'close']]
+        ).flatten()
+
+        x = np.linspace(
+            start=index[0] - 0.5,
+            stop=index[-1] + 0.5,
+            num=len(flat),
+        )
+    return x, flat
+
+
+def ohlc_to_m4_line(
+    ohlc: np.ndarray,
+    px_width: int,
+
+    downsample: bool = False,
+    uppx: Optional[float] = None,
+    pretrace: bool = False,
+
+) -> tuple[np.ndarray, np.ndarray]:
+    '''
+    Convert an OHLC struct-array to a m4 downsampled 1-d array.
+
+    '''
+    xpts, flat = ohlc_flatten(
+        ohlc,
+        use_mxmn=pretrace,
+    )
+
+    if downsample:
+        bins, x, y = ds_m4(
+            xpts,
+            flat,
+            px_width=px_width,
+            uppx=uppx,
+            # log_scale=bool(uppx)
+        )
+        x = np.broadcast_to(x[:, None], y.shape)
+        x = (x + np.array([-0.43, 0, 0, 0.43])).flatten()
+        y = y.flatten()
+
+        return x, y
+    else:
+        return xpts, flat
+
+
+def ds_m4(
+    x: np.ndarray,
+    y: np.ndarray,
+
+    # this is the width of the data in view
+    # in display-device-local pixel units.
+    px_width: int,
+    uppx: Optional[float] = None,
+    xrange: Optional[float] = None,
+    # log_scale: bool = True,
+
+) -> tuple[int, np.ndarray, np.ndarray]:
+    '''
+    Downsample using the M4 algorithm.
+
+    This is more or less an OHLC style sampling of a line-style series.
+
+    '''
+    # NOTE: this method is a so called "visualization driven data
+    # aggregation" approach. It gives error-free line chart
+    # downsampling, see
+    # further scientific paper resources:
+    # - http://www.vldb.org/pvldb/vol7/p797-jugel.pdf
+    # - http://www.vldb.org/2014/program/papers/demo/p997-jugel.pdf
+
+    # Details on implementation of this algo are based in,
+    # https://github.com/pikers/piker/issues/109
+
+    # XXX: from infinite on downsampling viewable graphics:
+    # "one thing i remembered about the binning - if you are
+    # picking a range within your timeseries the start and end bin
+    # should be one more bin size outside the visual range, then
+    # you get better visual fidelity at the edges of the graph"
+    # "i didn't show it in the sample code, but it's accounted for
+    # in the start and end indices and number of bins"
+
+    # optionally log-scale down the "supposed pxs on screen"
+    # as the units-per-px (uppx) get's large.
+    # if log_scale:
+    #     assert uppx, 'You must provide a `uppx` value to use log scaling!'
+    #     # uppx = uppx * math.log(uppx, 2)
+
+    #     # scaler = 2**7 / (1 + math.log(uppx, 2))
+    #     scaler = round(
+    #         max(
+    #             # NOTE: found that a 16x px width brought greater
+    #             # detail, likely due to dpi scaling?
+    #             # px_width=px_width * 16,
+    #             2**7 / (1 + math.log(uppx, 2)),
+    #             1
+    #         )
+    #     )
+    #     px_width *= scaler
+
+    # else:
+    #     px_width *= 16
+
+    # should never get called unless actually needed
+    assert px_width > 1 and uppx > 0
+
+    # NOTE: if we didn't pre-slice the data to downsample
+    # you could in theory pass these as the slicing params,
+    # do we care though since we can always just pre-slice the
+    # input?
+    x_start = x[0]  # x value start/lowest in domain
+
+    if xrange is None:
+        x_end = x[-1]  # x end value/highest in domain
+        xrange = (x_end - x_start)
+
+    # XXX: always round up on the input pixels
+    # lnx = len(x)
+    # uppx *= max(4 / (1 + math.log(uppx, 2)), 1)
+
+    pxw = math.ceil(xrange / uppx)
+    # px_width = math.ceil(px_width)
+
+    # ratio of indexed x-value to width of raster in pixels.
+    # this is more or less, uppx: units-per-pixel.
+    # w = xrange / float(px_width)
+    # uppx = uppx * math.log(uppx, 2)
+    # w2 = px_width / uppx
+
+    # scale up the width as the uppx get's large
+    w = uppx  # * math.log(uppx, 666)
+
+    # ensure we make more then enough
+    # frames (windows) for the output pixel
+    frames = pxw
+
+    # if we have more and then exact integer's
+    # (uniform quotient output) worth of datum-domain-points
+    # per windows-frame, add one more window to ensure
+    # we have room for all output down-samples.
+    pts_per_pixel, r = divmod(xrange, frames)
+    if r:
+        # while r:
+        frames += 1
+        pts_per_pixel, r = divmod(xrange, frames)
+
+    # print(
+    #     f'uppx: {uppx}\n'
+    #     f'xrange: {xrange}\n'
+    #     f'px_width: {px_width}\n'
+    #     f'pxw: {pxw}\n'
+    #     f'WTF w:{w}, w2:{w2}\n'
+    #     f'frames: {frames}\n'
+    # )
+    assert frames >= (xrange / uppx)
+
+    # call into ``numba``
+    nb, i_win, y_out = _m4(
+        x,
+        y,
+
+        frames,
+
+        # TODO: see func below..
+        # i_win,
+        # y_out,
+
+        # first index in x data to start at
+        x_start,
+        # window size for each "frame" of data to downsample (normally
+        # scaled by the ratio of pixels on screen to data in x-range).
+        w,
+    )
+
+    # filter out any overshoot in the input allocation arrays by
+    # removing zero-ed tail entries which should start at a certain
+    # index.
+    i_win = i_win[i_win != 0]
+    y_out = y_out[:i_win.size]
+
+    return nb, i_win, y_out
+
+
+@jit(
+    nopython=True,
+    nogil=True,
+)
+def _m4(
+
+    xs: np.ndarray,
+    ys: np.ndarray,
+
+    frames: int,
+
+    # TODO: using this approach by having the ``.zeros()`` alloc lines
+    # below, in put python was causing segs faults and alloc crashes..
+    # we might need to see how it behaves with shm arrays and consider
+    # allocating them once at startup?
+
+    # pre-alloc array of x indices mapping to the start
+    # of each window used for downsampling in y.
+    # i_win: np.ndarray,
+    # pre-alloc array of output downsampled y values
+    # y_out: np.ndarray,
+
+    x_start: int,
+    step: float,
+
+) -> int:
+    # nbins = len(i_win)
+    # count = len(xs)
+
+    # these are pre-allocated and mutated by ``numba``
+    # code in-place.
+    y_out = np.zeros((frames, 4), ys.dtype)
+    i_win = np.zeros(frames, xs.dtype)
+
+    bincount = 0
+    x_left = x_start
+
+    # Find the first window's starting value which *includes* the
+    # first value in the x-domain array, i.e. the first
+    # "left-side-of-window" **plus** the downsampling step,
+    # creates a window which includes the first x **value**.
+    while xs[0] >= x_left + step:
+        x_left += step
+
+    # set all bins in the left-most entry to the starting left-most x value
+    # (aka a row broadcast).
+    i_win[bincount] = x_left
+    # set all y-values to the first value passed in.
+    y_out[bincount] = ys[0]
+
+    for i in range(len(xs)):
+        x = xs[i]
+        y = ys[i]
+        if x < x_left + step:   # the current window "step" is [bin, bin+1)
+            y_out[bincount, 1] = min(y, y_out[bincount, 1])
+            y_out[bincount, 2] = max(y, y_out[bincount, 2])
+            y_out[bincount, 3] = y
+        else:
+            # Find the next bin
+            while x >= x_left + step:
+                x_left += step
+
+            bincount += 1
+            i_win[bincount] = x_left
+            y_out[bincount] = y
+
+    return bincount, i_win, y_out

piker/ui/_cursor.py

@@ -43,8 +43,8 @@ log = get_logger(__name__)
 # latency (in terms of perceived lag in cross hair) so really be sure
 # there's an improvement if you want to change it!
 
-_mouse_rate_limit = 120  # TODO; should we calc current screen refresh rate?
-_debounce_delay = 1 / 40
+_mouse_rate_limit = 60  # TODO; should we calc current screen refresh rate?
+_debounce_delay = 0
 _ch_label_opac = 1
 
 
@@ -95,22 +95,24 @@ class LineDot(pg.CurvePoint):
 
     def event(
         self,
-
         ev: QtCore.QEvent,
 
-    ) -> None:
+    ) -> bool:
         if not isinstance(
             ev, QtCore.QDynamicPropertyChangeEvent
         ) or self.curve() is None:
             return False
 
+        # TODO: get rid of this ``.getData()`` and
+        # make a more pythonic api to retreive backing
+        # numpy arrays...
         (x, y) = self.curve().getData()
         index = self.property('index')
         # first = self._plot._arrays['ohlc'][0]['index']
         # first = x[0]
         # i = index - first
         if index:
-            i = index - x[0]
+            i = round(index - x[0])
             if i > 0 and i < len(y):
                 newPos = (index, y[i])
                 QtWidgets.QGraphicsItem.setPos(self, *newPos)
@@ -241,13 +243,13 @@ class ContentsLabels:
     def update_labels(
         self,
         index: int,
-        # array_name: str,
 
     ) -> None:
-        # for name, (label, update) in self._labels.items():
         for chart, name, label, update in self._labels:
 
-            array = chart._arrays[name]
+            flow = chart._flows[name]
+            array = flow.shm.array
+
             if not (
                 index >= 0
                 and index < array[-1]['index']
@@ -256,8 +258,6 @@ class ContentsLabels:
                 print('WTF out of range?')
                 continue
 
-            # array = chart._arrays[name]
-
             # call provided update func with data point
             try:
                 label.show()
@@ -293,7 +293,8 @@ class ContentsLabels:
 
 
 class Cursor(pg.GraphicsObject):
-    '''Multi-plot cursor for use on a ``LinkedSplits`` chart (set).
+    '''
+    Multi-plot cursor for use on a ``LinkedSplits`` chart (set).
 
     '''
     def __init__(
@@ -308,7 +309,7 @@ class Cursor(pg.GraphicsObject):
 
         self.linked = linkedsplits
         self.graphics: dict[str, pg.GraphicsObject] = {}
-        self.plots: List['PlotChartWidget'] = []  # type: ignore # noqa
+        self.plots: list['PlotChartWidget'] = []  # type: ignore # noqa
         self.active_plot = None
         self.digits: int = digits
         self._datum_xy: tuple[int, float] = (0, 0)
@@ -405,6 +406,7 @@ class Cursor(pg.GraphicsObject):
             slot=self.mouseMoved,
             delay=_debounce_delay,
         )
+
         px_enter = pg.SignalProxy(
             plot.sig_mouse_enter,
             rateLimit=_mouse_rate_limit,
@@ -436,7 +438,10 @@ class Cursor(pg.GraphicsObject):
         if plot.linked.xaxis_chart is plot:
             xlabel = self.xaxis_label = XAxisLabel(
                 parent=self.plots[plot_index].getAxis('bottom'),
-                # parent=self.plots[plot_index].pi_overlay.get_axis(plot.plotItem, 'bottom'),
+                # parent=self.plots[plot_index].pi_overlay.get_axis(
+                #     plot.plotItem, 'bottom'
+                # ),
+
                 opacity=_ch_label_opac,
                 bg_color=self.label_color,
             )
@@ -454,9 +459,12 @@ class Cursor(pg.GraphicsObject):
     ) -> LineDot:
         # if this plot contains curves add line dot "cursors" to denote
         # the current sample under the mouse
+        main_flow = plot._flows[plot.name]
+        # read out last index
+        i = main_flow.shm.array[-1]['index']
         cursor = LineDot(
             curve,
-            index=plot._arrays[plot.name][-1]['index'],
+            index=i,
             plot=plot
         )
         plot.addItem(cursor)

piker/ui/_curve.py

@@ -1,5 +1,5 @@
 # piker: trading gear for hackers
-# Copyright (C) Tyler Goodlet (in stewardship for piker0)
+# Copyright (C) Tyler Goodlet (in stewardship for pikers)
 
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License as published by
@@ -23,6 +23,7 @@ from typing import Optional
 import numpy as np
 import pyqtgraph as pg
 from PyQt5 import QtGui, QtWidgets
+from PyQt5.QtWidgets import QGraphicsItem
 from PyQt5.QtCore import (
     Qt,
     QLineF,
@@ -31,59 +32,90 @@ from PyQt5.QtCore import (
     QPointF,
 )
 
-from .._profile import pg_profile_enabled
+from .._profile import pg_profile_enabled, ms_slower_then
 from ._style import hcolor
+from ._compression import (
+    # ohlc_to_m4_line,
+    ds_m4,
+)
+from ..log import get_logger
 
 
-def step_path_arrays_from_1d(
-    x: np.ndarray,
-    y: np.ndarray,
-    include_endpoints: bool = False,
+log = get_logger(__name__)
 
-) -> (np.ndarray, np.ndarray):
-    '''
-    Generate a "step mode" curve aligned with OHLC style bars
-    such that each segment spans each bar (aka "centered" style).
 
-    '''
-    y_out = y.copy()
-    x_out = x.copy()
-    x2 = np.empty(
-        # the data + 2 endpoints on either end for
-        # "termination of the path".
-        (len(x) + 1, 2),
-        # we want to align with OHLC or other sampling style
-        # bars likely so we need fractinal values
-        dtype=float,
-    )
-    x2[0] = x[0] - 0.5
-    x2[1] = x[0] + 0.5
-    x2[1:] = x[:, np.newaxis] + 0.5
+# TODO: numba this instead..
+# def step_path_arrays_from_1d(
+#     x: np.ndarray,
+#     y: np.ndarray,
+#     include_endpoints: bool = True,
 
-    # flatten to 1-d
-    x_out = x2.reshape(x2.size)
+# ) -> (np.ndarray, np.ndarray):
+#     '''
+#     Generate a "step mode" curve aligned with OHLC style bars
+#     such that each segment spans each bar (aka "centered" style).
 
-    # we create a 1d with 2 extra indexes to
-    # hold the start and (current) end value for the steps
-    # on either end
-    y2 = np.empty((len(y), 2), dtype=y.dtype)
-    y2[:] = y[:, np.newaxis]
+#     '''
+#     # y_out = y.copy()
+#     # x_out = x.copy()
 
-    y_out = np.empty(
-        2*len(y) + 2,
-        dtype=y.dtype
-    )
+#     # x2 = np.empty(
+#     #     # the data + 2 endpoints on either end for
+#     #     # "termination of the path".
+#     #     (len(x) + 1, 2),
+#     #     # we want to align with OHLC or other sampling style
+#     #     # bars likely so we need fractinal values
+#     #     dtype=float,
+#     # )
 
-    # flatten and set 0 endpoints
-    y_out[1:-1] = y2.reshape(y2.size)
-    y_out[0] = 0
-    y_out[-1] = 0
+#     x2 = np.broadcast_to(
+#         x[:, None],
+#         (
+#             x.size + 1,
+#             # 4,  # only ohlc
+#             2,
+#         ),
+#     ) + np.array([-0.5, 0.5])
 
-    if not include_endpoints:
-        return x_out[:-1], y_out[:-1]
+#     # x2[0] = x[0] - 0.5
+#     # x2[1] = x[0] + 0.5
+#     # x2[0, 0] = x[0] - 0.5
+#     # x2[0, 1] = x[0] + 0.5
+#     # x2[1:] = x[:, np.newaxis] + 0.5
+#     # import pdbpp
+#     # pdbpp.set_trace()
 
-    else:
-        return x_out, y_out
+#     # flatten to 1-d
+#     # x_out = x2.reshape(x2.size)
+#     # x_out = x2
+
+#     # we create a 1d with 2 extra indexes to
+#     # hold the start and (current) end value for the steps
+#     # on either end
+#     y2 = np.empty(
+#         (len(y) + 1, 2),
+#         dtype=y.dtype,
+#     )
+#     y2[:] = y[:, np.newaxis]
+#     # y2[-1] = 0
+
+#     # y_out = y2
+
+# #     y_out = np.empty(
+# #         2*len(y) + 2,
+# #         dtype=y.dtype
+# #     )
+
+#     # flatten and set 0 endpoints
+#     # y_out[1:-1] = y2.reshape(y2.size)
+#     # y_out[0] = 0
+#     # y_out[-1] = 0
+
+#     if not include_endpoints:
+#         return x2[:-1], y2[:-1]
+
+#     else:
+#         return x2, y2
 
 
 _line_styles: dict[str, int] = {
@@ -94,8 +126,7 @@ _line_styles: dict[str, int] = {
 }
 
 
-# TODO: got a feeling that dropping this inheritance gets us even more speedups
-class FastAppendCurve(pg.PlotCurveItem):
+class FastAppendCurve(pg.GraphicsObject):
     '''
     A faster, append friendly version of ``pyqtgraph.PlotCurveItem``
     built for real-time data updates.
@@ -110,22 +141,46 @@ class FastAppendCurve(pg.PlotCurveItem):
     '''
     def __init__(
         self,
+
+        x: np.ndarray = None,
+        y: np.ndarray = None,
         *args,
+
         step_mode: bool = False,
         color: str = 'default_lightest',
         fill_color: Optional[str] = None,
         style: str = 'solid',
         name: Optional[str] = None,
+        use_fpath: bool = True,
 
         **kwargs
 
     ) -> None:
 
+        # brutaaalll, see comments within..
+        self._y = self.yData = y
+        self._x = self.xData = x
+        self._vr: Optional[tuple] = None
+        self._avr: Optional[tuple] = None
+        self._br = None
+
+        self._name = name
+        self.path: Optional[QtGui.QPainterPath] = None
+
+        self.use_fpath = use_fpath
+        self.fast_path: Optional[QtGui.QPainterPath] = None
+
         # TODO: we can probably just dispense with the parent since
         # we're basically only using the pen setting now...
         super().__init__(*args, **kwargs)
-        self._name = name
-        self._xrange: tuple[int, int] = self.dataBounds(ax=0)
+
+        # self._xrange: tuple[int, int] = self.dataBounds(ax=0)
+        self._xrange: Optional[tuple[int, int]] = None
+        # self._x_iv_range = None
+
+        # self._last_draw = time.time()
+        self._in_ds: bool = False
+        self._last_uppx: float = 0
 
         # all history of curve is drawn in single px thickness
         pen = pg.mkPen(hcolor(color))
@@ -134,37 +189,111 @@ class FastAppendCurve(pg.PlotCurveItem):
         if 'dash' in style:
             pen.setDashPattern([8, 3])
 
-        self.setPen(pen)
+        self._pen = pen
 
         # last segment is drawn in 2px thickness for emphasis
         # self.last_step_pen = pg.mkPen(hcolor(color), width=2)
         self.last_step_pen = pg.mkPen(pen, width=2)
 
-        self._last_line: QLineF = None
-        self._last_step_rect: QRectF = None
+        self._last_line: Optional[QLineF] = None
+        self._last_step_rect: Optional[QRectF] = None
 
         # flat-top style histogram-like discrete curve
         self._step_mode: bool = step_mode
 
         # self._fill = True
-        self.setBrush(hcolor(fill_color or color))
+        self._brush = pg.functions.mkBrush(hcolor(fill_color or color))
 
         # TODO: one question still remaining is if this makes trasform
         # interactions slower (such as zooming) and if so maybe if/when
         # we implement a "history" mode for the view we disable this in
         # that mode?
-        if step_mode:
+        # if step_mode:
         # don't enable caching by default for the case where the
         # only thing drawn is the "last" line segment which can
         # have a weird artifact where it won't be fully drawn to its
         # endpoint (something we saw on trade rate curves)
-            self.setCacheMode(QtWidgets.QGraphicsItem.DeviceCoordinateCache)
+        self.setCacheMode(QGraphicsItem.DeviceCoordinateCache)
+
+    # TODO: probably stick this in a new parent
+    # type which will contain our own version of
+    # what ``PlotCurveItem`` had in terms of base
+    # functionality? A `FlowGraphic` maybe?
+    def x_uppx(self) -> int:
+
+        px_vecs = self.pixelVectors()[0]
+        if px_vecs:
+            xs_in_px = px_vecs.x()
+            return round(xs_in_px)
+        else:
+            return 0
+
+    def px_width(self) -> float:
+
+        vb = self.getViewBox()
+        if not vb:
+            return 0
+
+        vr = self.viewRect()
+        l, r = int(vr.left()), int(vr.right())
+
+        if not self._xrange:
+            return 0
+
+        start, stop = self._xrange
+        lbar = max(l, start)
+        rbar = min(r, stop)
+
+        return vb.mapViewToDevice(
+            QLineF(lbar, 0, rbar, 0)
+        ).length()
+
+    def downsample(
+        self,
+        x,
+        y,
+        px_width,
+        uppx,
+
+    ) -> tuple[np.ndarray, np.ndarray]:
+
+        # downsample whenever more then 1 pixels per datum can be shown.
+        # always refresh data bounds until we get diffing
+        # working properly, see above..
+        bins, x, y = ds_m4(
+            x,
+            y,
+            px_width=px_width,
+            uppx=uppx,
+            # log_scale=bool(uppx)
+        )
+        x = np.broadcast_to(x[:, None], y.shape)
+        # x = (x + np.array([-0.43, 0, 0, 0.43])).flatten()
+        x = (x + np.array([-0.5, 0, 0, 0.5])).flatten()
+        y = y.flatten()
+
+        # presumably?
+        self._in_ds = True
+        return x, y
 
     def update_from_array(
         self,
+
+        # full array input history
         x: np.ndarray,
         y: np.ndarray,
 
+        # pre-sliced array data that's "in view"
+        x_iv: np.ndarray,
+        y_iv: np.ndarray,
+
+        view_range: Optional[tuple[int, int]] = None,
+        profiler: Optional[pg.debug.Profiler] = None,
+        draw_last: bool = True,
+        slice_to_head: int = -1,
+        do_append: bool = True,
+        should_redraw: bool = False,
+
     ) -> QtGui.QPainterPath:
         '''
         Update curve from input 2-d data.
@@ -173,42 +302,235 @@ class FastAppendCurve(pg.PlotCurveItem):
         a length diff.
 
         '''
-        profiler = pg.debug.Profiler(disabled=not pg_profile_enabled())
+        profiler = profiler or pg.debug.Profiler(
+            msg=f'FastAppendCurve.update_from_array(): `{self._name}`',
+            disabled=not pg_profile_enabled(),
+            gt=ms_slower_then,
+        )
         flip_cache = False
 
+        if self._xrange:
             istart, istop = self._xrange
-        # print(f"xrange: {self._xrange}")
+        else:
+            self._xrange = istart, istop = x[0], x[-1]
 
         # compute the length diffs between the first/last index entry in
         # the input data and the last indexes we have on record from the
         # last time we updated the curve index.
-        prepend_length = istart - x[0]
-        append_length = x[-1] - istop
+        prepend_length = int(istart - x[0])
+        append_length = int(x[-1] - istop)
+
+        # this is the diff-mode, "data"-rendered index
+        # tracking var..
+        self._xrange = x[0], x[-1]
+
+        # print(f"xrange: {self._xrange}")
+
+        # XXX: lol brutal, the internals of `CurvePoint` (inherited by
+        # our `LineDot`) required ``.getData()`` to work..
+        # self.xData = x
+        # self.yData = y
+        # self._x, self._y = x, y
+
+        # downsampling incremental state checking
+        uppx = self.x_uppx()
+        px_width = self.px_width()
+        uppx_diff = (uppx - self._last_uppx)
+
+        new_sample_rate = False
+        should_ds = self._in_ds
+        showing_src_data = self._in_ds
+        # should_redraw = False
+
+        # if a view range is passed, plan to draw the
+        # source ouput that's "in view" of the chart.
+        if (
+            view_range
+            # and not self._in_ds
+            # and not prepend_length > 0
+        ):
+            # print(f'{self._name} vr: {view_range}')
+
+            # by default we only pull data up to the last (current) index
+            x_out, y_out = x_iv[:slice_to_head], y_iv[:slice_to_head]
+            profiler(f'view range slice {view_range}')
+
+            vl, vr = view_range
+
+            # last_ivr = self._x_iv_range
+            # ix_iv, iy_iv = self._x_iv_range = (x_iv[0], x_iv[-1])
+
+            zoom_or_append = False
+            last_vr = self._vr
+            last_ivr = self._avr
+
+            if last_vr:
+                # relative slice indices
+                lvl, lvr = last_vr
+                # abs slice indices
+                al, ar = last_ivr
+
+                # append_length = int(x[-1] - istop)
+                # append_length = int(x_iv[-1] - ar)
+
+                # left_change = abs(x_iv[0] - al) >= 1
+                # right_change = abs(x_iv[-1] - ar) >= 1
+
+                if (
+                    # likely a zoom view change
+                    (vr - lvr) > 2 or vl < lvl
+                    # append / prepend update
+                    # we had an append update where the view range
+                    # didn't change but the data-viewed (shifted)
+                    # underneath, so we need to redraw.
+                    # or left_change and right_change and last_vr == view_range
+
+                        # not (left_change and right_change) and ivr
+                    # (
+                    # or abs(x_iv[ivr] - livr) > 1
+                ):
+                    zoom_or_append = True
+
+            # if last_ivr:
+            #     liivl, liivr = last_ivr
+
+            if (
+                view_range != last_vr
+                and (
+                    append_length > 1
+                    or zoom_or_append
+                )
+            ):
+                should_redraw = True
+                # print("REDRAWING BRUH")
+
+            self._vr = view_range
+            self._avr = x_iv[0], x_iv[slice_to_head]
+
+            # x_last = x_iv[-1]
+            # y_last = y_iv[-1]
+            # self._last_vr = view_range
+
+            # self.disable_cache()
+            # flip_cache = True
+
+        else:
+            # if (
+            #     not view_range
+            #     or self._in_ds
+            # ):
+            # by default we only pull data up to the last (current) index
+            x_out, y_out = x[:slice_to_head], y[:slice_to_head]
+
+            if prepend_length > 0:
+                should_redraw = True
+
+        # check for downsampling conditions
+        if (
+            # std m4 downsample conditions
+            px_width
+            and abs(uppx_diff) >= 1
+        ):
+            log.info(
+                f'{self._name} sampler change: {self._last_uppx} -> {uppx}'
+            )
+            self._last_uppx = uppx
+            new_sample_rate = True
+            showing_src_data = False
+            should_redraw = True
+            should_ds = True
+
+        elif (
+            uppx <= 2
+            and self._in_ds
+        ):
+            # we should de-downsample back to our original
+            # source data so we clear our path data in prep
+            # to generate a new one from original source data.
+            should_redraw = True
+            new_sample_rate = True
+            should_ds = False
+            showing_src_data = True
+
+        # no_path_yet = self.path is None
+        if (
+            self.path is None
+            or should_redraw
+            or new_sample_rate
+            or prepend_length > 0
+        ):
+            # if (
+            #     not view_range
+            #     or self._in_ds
+            # ):
+            #     # by default we only pull data up to the last (current) index
+            #     x_out, y_out = x[:-1], y[:-1]
 
             # step mode: draw flat top discrete "step"
             # over the index space for each datum.
-        if self._step_mode:
-            x_out, y_out = step_path_arrays_from_1d(x[:-1], y[:-1])
+            # if self._step_mode:
+            #     self.disable_cache()
+            #     flip_cache = True
+            #     x_out, y_out = step_path_arrays_from_1d(
+            #         x_out,
+            #         y_out,
+            #     )
 
-        else:
-            # by default we only pull data up to the last (current) index
-            x_out, y_out = x[:-1], y[:-1]
+            #     # TODO: numba this bish
+            #     profiler('generated step arrays')
+
+            if should_redraw:
+                if self.path:
+                    # print(f'CLEARING PATH {self._name}')
+                    self.path.clear()
+
+                if self.fast_path:
+                    self.fast_path.clear()
+
+                profiler('cleared paths due to `should_redraw` set')
+
+            if new_sample_rate and showing_src_data:
+                # if self._in_ds:
+                log.info(f'DEDOWN -> {self._name}')
+
+                self._in_ds = False
+
+            elif should_ds and uppx and px_width > 1:
+                x_out, y_out = self.downsample(
+                    x_out,
+                    y_out,
+                    px_width,
+                    uppx,
+                )
+                profiler(f'FULL PATH downsample redraw={should_ds}')
+                self._in_ds = True
 
-        if self.path is None or prepend_length > 0:
             self.path = pg.functions.arrayToQPath(
                 x_out,
                 y_out,
                 connect='all',
                 finiteCheck=False,
+                path=self.path,
             )
-            profiler('generate fresh path')
+            self.prepareGeometryChange()
+            profiler(
+                f'generated fresh path. (should_redraw: {should_redraw} should_ds: {should_ds} new_sample_rate: {new_sample_rate})'
+            )
+            # profiler(f'DRAW PATH IN VIEW -> {self._name}')
 
-            # if self._step_mode:
-            #     self.path.closeSubpath()
+            # reserve mem allocs see:
+            # - https://doc.qt.io/qt-5/qpainterpath.html#reserve
+            # - https://doc.qt.io/qt-5/qpainterpath.html#capacity
+            # - https://doc.qt.io/qt-5/qpainterpath.html#clear
+            # XXX: right now this is based on had hoc checks on a
+            # hidpi 3840x2160 4k monitor but we should optimize for
+            # the target display(s) on the sys.
+            # if no_path_yet:
+            #     self.path.reserve(int(500e3))
 
         # TODO: get this piecewise prepend working - right now it's
         # giving heck on vwap...
-        # if prepend_length:
+        # elif prepend_length:
         #     breakpoint()
 
         #     prepend_path = pg.functions.arrayToQPath(
@@ -223,39 +545,81 @@ class FastAppendCurve(pg.PlotCurveItem):
         #     # self.path.moveTo(new_x[0], new_y[0])
         #     self.path.connectPath(old_path)
 
-        elif append_length > 0:
-            if self._step_mode:
-                new_x, new_y = step_path_arrays_from_1d(
-                    x[-append_length - 2:-1],
-                    y[-append_length - 2:-1],
-                )
-                # [1:] since we don't need the vertical line normally at
-                # the beginning of the step curve taking the first (x,
-                # y) poing down to the x-axis **because** this is an
-                # appended path graphic.
-                new_x = new_x[1:]
-                new_y = new_y[1:]
+        elif (
+            append_length > 0
+            and do_append
+            and not should_redraw
+            # and not view_range
+        ):
+            print(f'{self._name} append len: {append_length}')
+            new_x = x[-append_length - 2:slice_to_head]
+            new_y = y[-append_length - 2:slice_to_head]
+            profiler('sliced append path')
 
-            else:
-                # print(f"append_length: {append_length}")
-                new_x = x[-append_length - 2:-1]
-                new_y = y[-append_length - 2:-1]
-                # print((new_x, new_y))
+            # if self._step_mode:
+            # #     new_x, new_y = step_path_arrays_from_1d(
+            # #         new_x,
+            # #         new_y,
+            # #     )
+            # #     # [1:] since we don't need the vertical line normally at
+            # #     # the beginning of the step curve taking the first (x,
+            # #     # y) poing down to the x-axis **because** this is an
+            # #     # appended path graphic.
+            # #     new_x = new_x[1:]
+            # #     new_y = new_y[1:]
+
+            #     self.disable_cache()
+            #     flip_cache = True
+
+            #     profiler('generated step data')
+
+            profiler(
+                f'diffed array input, append_length={append_length}'
+            )
+
+            # if should_ds:
+            #     new_x, new_y = self.downsample(
+            #         new_x,
+            #         new_y,
+            #         px_width,
+            #         uppx,
+            #     )
+            #     profiler(f'fast path downsample redraw={should_ds}')
 
             append_path = pg.functions.arrayToQPath(
                 new_x,
                 new_y,
                 connect='all',
-                # finiteCheck=False,
+                finiteCheck=False,
+                path=self.fast_path,
             )
+            profiler('generated append qpath')
 
-            path = self.path
+            if self.use_fpath:
+                # an attempt at trying to make append-updates faster..
+                if self.fast_path is None:
+                    self.fast_path = append_path
+                    # self.fast_path.reserve(int(6e3))
+                else:
+                    self.fast_path.connectPath(append_path)
+                    size = self.fast_path.capacity()
+                    profiler(f'connected fast path w size: {size}')
+
+                    # print(f"append_path br: {append_path.boundingRect()}")
+                    # self.path.moveTo(new_x[0], new_y[0])
+                    # path.connectPath(append_path)
+
+                    # XXX: lol this causes a hang..
+                    # self.path = self.path.simplified()
+            else:
+                size = self.path.capacity()
+                profiler(f'connected history path w size: {size}')
+                self.path.connectPath(append_path)
 
             # other merging ideas:
             # https://stackoverflow.com/questions/8936225/how-to-merge-qpainterpaths
-            if self._step_mode:
             # path.addPath(append_path)
-                self.path.connectPath(append_path)
+            # path.closeSubpath()
 
             # TODO: try out new work from `pyqtgraph` main which
             # should repair horrid perf:
@@ -265,32 +629,30 @@ class FastAppendCurve(pg.PlotCurveItem):
             #     # XXX: super slow set "union" op
             #     self.path = self.path.united(append_path).simplified()
 
-                #     # path.addPath(append_path)
-                #     # path.closeSubpath()
+            # self.disable_cache()
+            # flip_cache = True
 
-            else:
-                # print(f"append_path br: {append_path.boundingRect()}")
-                # self.path.moveTo(new_x[0], new_y[0])
-                # self.path.connectPath(append_path)
-                path.connectPath(append_path)
+        if draw_last:
+            self.draw_last(x, y)
+            profiler('draw last segment')
 
-            self.disable_cache()
-            flip_cache = True
 
-        if (
-            self._step_mode
-        ):
-            self.disable_cache()
-            flip_cache = True
+        # if flip_cache:
+        # #     # XXX: seems to be needed to avoid artifacts (see above).
+        #     self.setCacheMode(QGraphicsItem.DeviceCoordinateCache)
 
-            # print(f"update br: {self.path.boundingRect()}")
+        # trigger redraw of path
+        # do update before reverting to cache mode
+        self.update()
+        profiler('.update()')
 
-        # XXX: lol brutal, the internals of `CurvePoint` (inherited by
-        # our `LineDot`) required ``.getData()`` to work..
-        self.xData = x
-        self.yData = y
+    def draw_last(
+        self,
+        x: np.ndarray,
+        y: np.ndarray,
 
-        x0, x_last = self._xrange = x[0], x[-1]
+    ) -> None:
+        x_last = x[-1]
         y_last = y[-1]
 
         # draw the "current" step graphic segment so it lines up with
@@ -299,26 +661,64 @@ class FastAppendCurve(pg.PlotCurveItem):
             self._last_line = QLineF(
                 x_last - 0.5, 0,
                 x_last + 0.5, 0,
+                # x_last, 0,
+                # x_last, 0,
             )
             self._last_step_rect = QRectF(
                 x_last - 0.5, 0,
                 x_last + 0.5, y_last
+                # x_last, 0,
+                # x_last, y_last
             )
+            # print(
+            #     f"path br: {self.path.boundingRect()}",
+            #     f"fast path br: {self.fast_path.boundingRect()}",
+            #     f"last rect br: {self._last_step_rect}",
+            # )
         else:
-            # print((x[-1], y_last))
             self._last_line = QLineF(
                 x[-2], y[-2],
-                x[-1], y_last
+                x_last, y_last
             )
 
-        # trigger redraw of path
-        # do update before reverting to cache mode
-        self.prepareGeometryChange()
         self.update()
 
-        if flip_cache:
-            # XXX: seems to be needed to avoid artifacts (see above).
-            self.setCacheMode(QtWidgets.QGraphicsItem.DeviceCoordinateCache)
+    # XXX: lol brutal, the internals of `CurvePoint` (inherited by
+    # our `LineDot`) required ``.getData()`` to work..
+    def getData(self):
+        return self._x, self._y
+
+    # TODO: drop the above after ``Cursor`` re-work
+    def get_arrays(self) -> tuple[np.ndarray, np.ndarray]:
+        return self._x, self._y
+
+    def clear(self):
+        '''
+        Clear internal graphics making object ready for full re-draw.
+
+        '''
+        # NOTE: original code from ``pg.PlotCurveItem``
+        self.xData = None
+        self.yData = None
+
+        # XXX: previously, if not trying to leverage `.reserve()` allocs
+        # then you might as well create a new one..
+        # self.path = None
+
+        # path reservation aware non-mem de-alloc cleaning
+        if self.path:
+            self.path.clear()
+
+            if self.fast_path:
+                # self.fast_path.clear()
+                self.fast_path = None
+
+        # self.disable_cache()
+        # self.setCacheMode(QGraphicsItem.DeviceCoordinateCache)
+
+    def reset_cache(self) -> None:
+        self.disable_cache()
+        self.setCacheMode(QGraphicsItem.DeviceCoordinateCache)
 
     def disable_cache(self) -> None:
         '''
@@ -328,7 +728,7 @@ class FastAppendCurve(pg.PlotCurveItem):
         # XXX: pretty annoying but, without this there's little
         # artefacts on the append updates to the curve...
         self.setCacheMode(QtWidgets.QGraphicsItem.NoCache)
-        self.prepareGeometryChange()
+        # self.prepareGeometryChange()
 
     def boundingRect(self):
         '''
@@ -339,29 +739,65 @@ class FastAppendCurve(pg.PlotCurveItem):
         else:
             # dynamically override this method after initial
             # path is created to avoid requiring the above None check
-            self.boundingRect = self._br
-            return self._br()
+            self.boundingRect = self._path_br
+            return self._path_br()
 
-    def _br(self):
+    def _path_br(self):
         '''
         Post init ``.boundingRect()```.
 
         '''
         hb = self.path.controlPointRect()
+        # hb = self.path.boundingRect()
         hb_size = hb.size()
+
+        fp = self.fast_path
+        if fp:
+            fhb = fp.controlPointRect()
+            hb_size = fhb.size() + hb_size
         # print(f'hb_size: {hb_size}')
 
+        # if self._last_step_rect:
+        #     hb_size += self._last_step_rect.size()
+
+        # if self._line:
+        #     br = self._last_step_rect.bottomRight()
+
+        # tl = QPointF(
+        #     # self._vr[0],
+        #     # hb.topLeft().y(),
+        #     # 0,
+        #     # hb_size.height() + 1
+        # )
+
+        # if self._last_step_rect:
+        #     br = self._last_step_rect.bottomRight()
+
+        # else:
+        # hb_size += QSizeF(1, 1)
         w = hb_size.width() + 1
         h = hb_size.height() + 1
 
+        # br = QPointF(
+        #     self._vr[-1],
+        #     # tl.x() + w,
+        #     tl.y() + h,
+        # )
+
         br = QRectF(
 
             # top left
+            # hb.topLeft()
+            # tl,
             QPointF(hb.topLeft()),
 
+            # br,
             # total size
+            # QSizeF(hb_size)
+            # hb_size,
             QSizeF(w, h)
         )
+        self._br = br
         # print(f'bounding rect: {br}')
         return br
 
@@ -373,32 +809,44 @@ class FastAppendCurve(pg.PlotCurveItem):
 
     ) -> None:
 
-        profiler = pg.debug.Profiler(disabled=not pg_profile_enabled())
-        # p.setRenderHint(p.Antialiasing, True)
+        profiler = pg.debug.Profiler(
+            msg=f'FastAppendCurve.paint(): `{self._name}`',
+            disabled=not pg_profile_enabled(),
+            gt=ms_slower_then,
+        )
+        self.prepareGeometryChange()
 
         if (
             self._step_mode
             and self._last_step_rect
         ):
-            brush = self.opts['brush']
+            brush = self._brush
+
             # p.drawLines(*tuple(filter(bool, self._last_step_lines)))
             # p.drawRect(self._last_step_rect)
             p.fillRect(self._last_step_rect, brush)
+            profiler('.fillRect()')
 
-            # p.drawPath(self.path)
-            # profiler('.drawPath()')
-
+        if self._last_line:
             p.setPen(self.last_step_pen)
             p.drawLine(self._last_line)
             profiler('.drawLine()')
+            p.setPen(self._pen)
 
-        # else:
-        p.setPen(self.opts['pen'])
-        p.drawPath(self.path)
-        profiler('.drawPath()')
+        path = self.path
 
-        # TODO: try out new work from `pyqtgraph` main which
-        # should repair horrid perf:
+        if path:
+            p.drawPath(path)
+            profiler(f'.drawPath(path): {path.capacity()}')
+
+        fp = self.fast_path
+        if fp:
+            p.drawPath(fp)
+            profiler('.drawPath(fast_path)')
+
+        # TODO: try out new work from `pyqtgraph` main which should
+        # repair horrid perf (pretty sure i did and it was still
+        # horrible?):
         # https://github.com/pyqtgraph/pyqtgraph/pull/2032
         # if self._fill:
         #     brush = self.opts['brush']

piker/ui/_display.py

@@ -21,16 +21,19 @@ this module ties together quote and computational (fsp) streams with
 graphics update methods via our custom ``pyqtgraph`` charting api.
 
 '''
+from dataclasses import dataclass
 from functools import partial
 import time
-from typing import Optional
+from typing import Optional, Any, Callable
 
 import numpy as np
 import tractor
 import trio
+import pyqtgraph as pg
 
 from .. import brokers
 from ..data.feed import open_feed
+from ._axes import YAxisLabel
 from ._chart import (
     ChartPlotWidget,
     LinkedSplits,
@@ -49,12 +52,16 @@ from ._forms import (
     mk_order_pane_layout,
 )
 from .order_mode import open_order_mode
+# from .._profile import (
+#     pg_profile_enabled,
+#     ms_slower_then,
+# )
 from ..log import get_logger
 
 log = get_logger(__name__)
 
 # TODO: load this from a config.toml!
-_quote_throttle_rate: int = 6 + 16  # Hz
+_quote_throttle_rate: int = 22  # Hz
 
 
 # a working tick-type-classes template
@@ -65,12 +72,20 @@ _tick_groups = {
 }
 
 
+# TODO: delegate this to each `Flow.maxmin()` which includes
+# caching and further we should implement the following stream based
+# approach, likely with ``numba``:
+# https://arxiv.org/abs/cs/0610046
+# https://github.com/lemire/pythonmaxmin
 def chart_maxmin(
     chart: ChartPlotWidget,
+    ohlcv_shm: ShmArray,
     vlm_chart: Optional[ChartPlotWidget] = None,
 
 ) -> tuple[
+
     tuple[int, int, int, int],
+
     float,
     float,
     float,
@@ -79,34 +94,53 @@ def chart_maxmin(
     Compute max and min datums "in view" for range limits.
 
     '''
-    # TODO: implement this
-    # https://arxiv.org/abs/cs/0610046
-    # https://github.com/lemire/pythonmaxmin
-
-    array = chart._arrays[chart.name]
-    ifirst = array[0]['index']
-
     last_bars_range = chart.bars_range()
-    l, lbar, rbar, r = last_bars_range
-    in_view = array[lbar - ifirst:rbar - ifirst + 1]
+    out = chart.maxmin()
 
-    if not in_view.size:
-        log.warning('Resetting chart to data')
-        chart.default_view()
+    if out is None:
         return (last_bars_range, 0, 0, 0)
 
-    mx, mn = np.nanmax(in_view['high']), np.nanmin(in_view['low'])
-
-    # TODO: when we start using line charts, probably want to make
-    # this an overloaded call on our `DataView
-    # sym = chart.name
-    # mx, mn = np.nanmax(in_view[sym]), np.nanmin(in_view[sym])
+    mn, mx = out
 
     mx_vlm_in_view = 0
     if vlm_chart:
-        mx_vlm_in_view = np.max(in_view['volume'])
+        out = vlm_chart.maxmin()
+        if out:
+            _, mx_vlm_in_view = out
 
-    return last_bars_range, mx, max(mn, 0), mx_vlm_in_view
+    return (
+        last_bars_range,
+        mx,
+        max(mn, 0),  # presuming price can't be negative?
+        mx_vlm_in_view,
+    )
+
+
+@dataclass
+class DisplayState:
+    '''
+    Chart-local real-time graphics state container.
+
+    '''
+    quotes: dict[str, Any]
+
+    maxmin: Callable
+    ohlcv: ShmArray
+
+    # high level chart handles
+    linked: LinkedSplits
+    chart: ChartPlotWidget
+    vlm_chart: ChartPlotWidget
+
+    # axis labels
+    l1: L1Labels
+    last_price_sticky: YAxisLabel
+    vlm_sticky: YAxisLabel
+
+    # misc state tracking
+    vars: dict[str, Any]
+
+    wap_in_history: bool = False
 
 
 async def graphics_update_loop(
@@ -147,10 +181,13 @@ async def graphics_update_loop(
 
     if vlm_chart:
         vlm_sticky = vlm_chart._ysticks['volume']
-        vlm_view = vlm_chart.view
 
-    maxmin = partial(chart_maxmin, chart, vlm_chart)
-    chart.default_view()
+    maxmin = partial(
+        chart_maxmin,
+        chart,
+        ohlcv,
+        vlm_chart,
+    )
     last_bars_range: tuple[float, float]
     (
         last_bars_range,
@@ -183,7 +220,7 @@ async def graphics_update_loop(
     tick_margin = 3 * tick_size
 
     chart.show()
-    view = chart.view
+    # view = chart.view
     last_quote = time.time()
     i_last = ohlcv.index
 
@@ -210,7 +247,32 @@ async def graphics_update_loop(
 
     # async for quotes in iter_drain_quotes():
 
+    ds = linked.display_state = DisplayState(**{
+        'quotes': {},
+        'linked': linked,
+        'maxmin': maxmin,
+        'ohlcv': ohlcv,
+        'chart': chart,
+        'last_price_sticky': last_price_sticky,
+        'vlm_chart': vlm_chart,
+        'vlm_sticky': vlm_sticky,
+        'l1': l1,
+
+        'vars': {
+            'tick_margin': tick_margin,
+            'i_last': i_last,
+            'last_mx_vlm': last_mx_vlm,
+            'last_mx': last_mx,
+            'last_mn': last_mn,
+        }
+    })
+
+    chart.default_view()
+
+    # main real-time quotes update loop
     async for quotes in stream:
+
+        ds.quotes = quotes
         quote_period = time.time() - last_quote
         quote_rate = round(
             1/quote_period, 1) if quote_period > 0 else float('inf')
@@ -231,26 +293,56 @@ async def graphics_update_loop(
             chart.pause_all_feeds()
             continue
 
-        for sym, quote in quotes.items():
+        ic = chart.view._ic
+        if ic:
+            chart.pause_all_feeds()
+            await ic.wait()
+            chart.resume_all_feeds()
 
-            (
-                brange,
-                mx_in_view,
-                mn_in_view,
-                mx_vlm_in_view,
-            ) = maxmin()
-            l, lbar, rbar, r = brange
-            mx = mx_in_view + tick_margin
-            mn = mn_in_view - tick_margin
+        # sync call to update all graphics/UX components.
+        graphics_update_cycle(ds)
+
+
+def graphics_update_cycle(
+    ds: DisplayState,
+    wap_in_history: bool = False,
+    trigger_all: bool = False,  # flag used by prepend history updates
+
+) -> None:
+    # TODO: eventually optimize this whole graphics stack with ``numba``
+    # hopefully XD
+
+    chart = ds.chart
+
+    profiler = pg.debug.Profiler(
+        msg=f'Graphics loop cycle for: `{chart.name}`',
+        disabled=True,  # not pg_profile_enabled(),
+        gt=1/12 * 1e3,
+        # gt=ms_slower_then,
+    )
+
+    # unpack multi-referenced components
+    vlm_chart = ds.vlm_chart
+    l1 = ds.l1
+    ohlcv = ds.ohlcv
+    array = ohlcv.array
+    vars = ds.vars
+    tick_margin = vars['tick_margin']
+
+    update_uppx = 16
+
+    for sym, quote in ds.quotes.items():
+
+        # compute the first available graphic's x-units-per-pixel
+        xpx = vlm_chart.view.x_uppx()
 
         # NOTE: vlm may be written by the ``brokerd`` backend
         # event though a tick sample is not emitted.
         # TODO: show dark trades differently
         # https://github.com/pikers/piker/issues/116
-            array = ohlcv.array
 
         # NOTE: this used to be implemented in a dedicated
-            # "increment tas": ``check_for_new_bars()`` but it doesn't
+        # "increment task": ``check_for_new_bars()`` but it doesn't
         # make sense to do a whole task switch when we can just do
         # this simple index-diff and all the fsp sub-curve graphics
         # are diffed on each draw cycle anyway; so updates to the
@@ -258,36 +350,96 @@ async def graphics_update_loop(
 
         # increment the view position by the sample offset.
         i_step = ohlcv.index
-            i_diff = i_step - i_last
-            if i_diff > 0:
-                chart.increment_view(
-                    steps=i_diff,
+        i_diff = i_step - vars['i_last']
+        vars['i_last'] = i_step
+
+        (
+            brange,
+            mx_in_view,
+            mn_in_view,
+            mx_vlm_in_view,
+        ) = ds.maxmin()
+
+        l, lbar, rbar, r = brange
+        mx = mx_in_view + tick_margin
+        mn = mn_in_view - tick_margin
+        profiler('maxmin call')
+        liv = r > i_step  # the last datum is in view
+
+        # don't real-time "shift" the curve to the
+        # left unless we get one of the following:
+        if (
+            (
+                i_diff > 0  # no new sample step
+                and xpx < 4  # chart is zoomed out very far
+                and r >= i_step  # the last datum isn't in view
+                and liv
             )
-            i_last = i_step
+            or trigger_all
+        ):
+            # TODO: we should track and compute whether the last
+            # pixel in a curve should show new data based on uppx
+            # and then iff update curves and shift?
+            chart.increment_view(steps=i_diff)
 
         if vlm_chart:
-                vlm_chart.update_curve_from_array('volume', array)
-                vlm_sticky.update_from_data(*array[-1][['index', 'volume']])
+            # always update y-label
+            ds.vlm_sticky.update_from_data(
+                *array[-1][['index', 'volume']]
+            )
 
             if (
-                    mx_vlm_in_view != last_mx_vlm or
-                    mx_vlm_in_view > last_mx_vlm
-                ):
-                    # print(f'mx vlm: {last_mx_vlm} -> {mx_vlm_in_view}')
-                    vlm_view._set_yrange(
-                        yrange=(0, mx_vlm_in_view * 1.375)
+                (
+                    xpx < update_uppx
+                    or i_diff > 0
+                    and liv
                 )
-                    last_mx_vlm = mx_vlm_in_view
+                or trigger_all
+            ):
+                # TODO: make it so this doesn't have to be called
+                # once the $vlm is up?
+                vlm_chart.update_graphics_from_flow(
+                    'volume',
+                    # UGGGh, see ``maxmin()`` impl in `._fsp` for
+                    # the overlayed plotitems... we need a better
+                    # bay to invoke a maxmin per overlay..
+                    render=False,
+                    # XXX: ^^^^ THIS IS SUPER IMPORTANT! ^^^^
+                    # without this, since we disable the
+                    # 'volume' (units) chart after the $vlm starts
+                    # up we need to be sure to enable this
+                    # auto-ranging otherwise there will be no handler
+                    # connected to update accompanying overlay
+                    # graphics..
+                )
+
+                if (
+                    mx_vlm_in_view != vars['last_mx_vlm']
+                ):
+                    yrange = (0, mx_vlm_in_view * 1.375)
+                    vlm_chart.view._set_yrange(
+                        yrange=yrange,
+                    )
+                    # print(f'mx vlm: {last_mx_vlm} -> {mx_vlm_in_view}')
+                    vars['last_mx_vlm'] = mx_vlm_in_view
 
                 for curve_name, flow in vlm_chart._flows.items():
+
+                    if not flow.render:
+                        continue
+
                     update_fsp_chart(
                         vlm_chart,
-                        flow.shm,
+                        flow,
                         curve_name,
                         array_key=curve_name,
+                        do_append=xpx < update_uppx,
                     )
                     # is this even doing anything?
-                    flow.plot.vb._set_yrange(
+                    # (pretty sure it's the real-time
+                    # resizing from last quote?)
+                    fvb = flow.plot.vb
+                    fvb._set_yrange(
                         autoscale_linked_plots=False,
                         name=curve_name,
                     )
@@ -334,9 +486,19 @@ async def graphics_update_loop(
         # current) tick first order as an optimization where we only
         # update from the last tick from each type class.
         # last_clear_updated: bool = False
-            # for typ, tick in reversed(lasts.items()):
 
-            # iterate in FIFO order per frame
+        # update ohlc sampled price bars
+        if (
+            xpx < update_uppx
+            or i_diff > 0
+            or trigger_all
+        ):
+            chart.update_graphics_from_flow(
+                chart.name,
+                do_append=xpx < update_uppx,
+            )
+
+        # iterate in FIFO order per tick-frame
         for typ, tick in lasts.items():
 
             price = tick.get('price')
@@ -346,6 +508,7 @@ async def graphics_update_loop(
             # tick frames to determine the y-range for chart
             # auto-scaling.
             # TODO: we need a streaming minmax algo here, see def above.
+            if liv:
                 mx = max(price + tick_margin, mx)
                 mn = min(price - tick_margin, mn)
 
@@ -364,19 +527,15 @@ async def graphics_update_loop(
 
                 # update price sticky(s)
                 end = array[-1]
-                    last_price_sticky.update_from_data(
+                ds.last_price_sticky.update_from_data(
                     *end[['index', 'close']]
                 )
 
-                    # update ohlc sampled price bars
-                    chart.update_ohlc_from_array(
-                        chart.name,
-                        array,
-                    )
-
                 if wap_in_history:
                     # update vwap overlay line
-                        chart.update_curve_from_array('bar_wap', ohlcv.array)
+                    chart.update_graphics_from_flow(
+                        'bar_wap',
+                    )
 
             # L1 book label-line updates
             # XXX: is this correct for ib?
@@ -389,64 +548,69 @@ async def graphics_update_loop(
                     l1.bid_label.fields['level']: l1.bid_label,
                 }.get(price)
 
-                    if label is not None:
-                        label.update_fields({'level': price, 'size': size})
+                if (
+                    label is not None
+                    and liv
+                ):
+                    label.update_fields(
+                        {'level': price, 'size': size}
+                    )
 
                     # TODO: on trades should we be knocking down
                     # the relevant L1 queue?
                     # label.size -= size
 
-                # elif ticktype in ('ask', 'asize'):
-                elif typ in _tick_groups['asks']:
+            elif (
+                typ in _tick_groups['asks']
+                # TODO: instead we could check if the price is in the
+                # y-view-range?
+                and liv
+            ):
                 l1.ask_label.update_fields({'level': price, 'size': size})
 
-                # elif ticktype in ('bid', 'bsize'):
-                elif typ in _tick_groups['bids']:
+            elif (
+                typ in _tick_groups['bids']
+                # TODO: instead we could check if the price is in the
+                # y-view-range?
+                and liv
+            ):
                 l1.bid_label.update_fields({'level': price, 'size': size})
 
         # check for y-range re-size
         if (
-                (mx > last_mx) or (mn < last_mn)
+            (mx > vars['last_mx']) or (mn < vars['last_mn'])
             and not chart._static_yrange == 'axis'
+            and liv
         ):
-                # print(f'new y range: {(mn, mx)}')
-                view._set_yrange(
-                    yrange=(mn, mx),
+            main_vb = chart.view
+            if (
+                main_vb._ic is None
+                or not main_vb._ic.is_set()
+            ):
+                main_vb._set_yrange(
                     # TODO: we should probably scale
                     # the view margin based on the size
                     # of the true range? This way you can
                     # slap in orders outside the current
                     # L1 (only) book range.
                     # range_margin=0.1,
+                    yrange=(mn, mx),
                 )
 
-            last_mx, last_mn = mx, mn
+        vars['last_mx'], vars['last_mn'] = mx, mn
 
-            # run synchronous update on all derived fsp subplots
-            for name, subchart in linked.subplots.items():
-                update_fsp_chart(
-                    subchart,
-                    subchart._shm,
-
-                    # XXX: do we really needs seperate names here?
-                    name,
-                    array_key=name,
-                )
-                subchart.cv._set_yrange()
-
-                # TODO: all overlays on all subplots..
-
-            # run synchronous update on all derived overlays
+        # run synchronous update on all linked flows
         for curve_name, flow in chart._flows.items():
+            # TODO: should the "main" (aka source) flow be special?
+            if curve_name == chart.data_key:
+                continue
+
             update_fsp_chart(
                 chart,
-                    flow.shm,
+                flow,
                 curve_name,
                 array_key=curve_name,
             )
-                # chart.view._set_yrange()
-
-        # loop end
 
 
 async def display_symbol_data(
@@ -479,8 +643,10 @@ async def display_symbol_data(
     #     clear_on_next=True,
     #     group_key=loading_sym_key,
     # )
+    fqsn = '.'.join((sym, provider))
+
     async with open_feed(
-        ['.'.join((sym, provider))],
+        [fqsn],
         loglevel=loglevel,
 
         # limit to at least display's FPS
@@ -500,8 +666,8 @@ async def display_symbol_data(
             f'step:1s '
         )
 
-        linkedsplits = godwidget.linkedsplits
-        linkedsplits._symbol = symbol
+        linked = godwidget.linkedsplits
+        linked._symbol = symbol
 
         # generate order mode side-pane UI
         # A ``FieldsForm`` form to configure order entry
@@ -511,38 +677,38 @@ async def display_symbol_data(
         godwidget.pp_pane = pp_pane
 
         # create main OHLC chart
-        chart = linkedsplits.plot_ohlc_main(
+        chart = linked.plot_ohlc_main(
             symbol,
-            bars,
+            ohlcv,
             sidepane=pp_pane,
         )
+        chart.default_view()
         chart._feeds[symbol.key] = feed
         chart.setFocus()
 
         # plot historical vwap if available
         wap_in_history = False
 
-        if brokermod._show_wap_in_history:
+        # XXX: FOR SOME REASON THIS IS CAUSING HANGZ!?!
+        # if brokermod._show_wap_in_history:
 
-            if 'bar_wap' in bars.dtype.fields:
-                wap_in_history = True
-                chart.draw_curve(
-                    name='bar_wap',
-                    data=bars,
-                    add_label=False,
-                )
+        #     if 'bar_wap' in bars.dtype.fields:
+        #         wap_in_history = True
+        #         chart.draw_curve(
+        #             name='bar_wap',
+        #             shm=ohlcv,
+        #             color='default_light',
+        #             add_label=False,
+        #         )
 
         # size view to data once at outset
         chart.cv._set_yrange()
 
-        # TODO: a data view api that makes this less shit
-        chart._shm = ohlcv
-
         # NOTE: we must immediately tell Qt to show the OHLC chart
         # to avoid a race where the subplots get added/shown to
         # the linked set *before* the main price chart!
-        linkedsplits.show()
-        linkedsplits.focus()
+        linked.show()
+        linked.focus()
         await trio.sleep(0)
 
         vlm_chart: Optional[ChartPlotWidget] = None
@@ -552,7 +718,7 @@ async def display_symbol_data(
             if has_vlm(ohlcv):
                 vlm_chart = await ln.start(
                     open_vlm_displays,
-                    linkedsplits,
+                    linked,
                     ohlcv,
                 )
 
@@ -560,7 +726,7 @@ async def display_symbol_data(
             # from an input config.
             ln.start_soon(
                 start_fsp_displays,
-                linkedsplits,
+                linked,
                 ohlcv,
                 loading_sym_key,
                 loglevel,
@@ -569,7 +735,7 @@ async def display_symbol_data(
             # start graphics update loop after receiving first live quote
             ln.start_soon(
                 graphics_update_loop,
-                linkedsplits,
+                linked,
                 feed.stream,
                 ohlcv,
                 wap_in_history,
@@ -587,17 +753,18 @@ async def display_symbol_data(
                 # let Qt run to render all widgets and make sure the
                 # sidepanes line up vertically.
                 await trio.sleep(0)
-                linkedsplits.resize_sidepanes()
+                linked.resize_sidepanes()
 
                 # NOTE: we pop the volume chart from the subplots set so
                 # that it isn't double rendered in the display loop
                 # above since we do a maxmin calc on the volume data to
                 # determine if auto-range adjustements should be made.
-                linkedsplits.subplots.pop('volume', None)
+                # linked.subplots.pop('volume', None)
 
                 # TODO: make this not so shit XD
                 # close group status
                 sbar._status_groups[loading_sym_key][1]()
 
                 # let the app run.. bby
+                # linked.graphics_cycle()
                 await trio.sleep_forever()

piker/ui/_editors.py

@@ -343,7 +343,7 @@ class SelectRect(QtGui.QGraphicsRectItem):
         nbars = ixmx - ixmn + 1
 
         chart = self._chart
-        data = chart._arrays[chart.name][ixmn:ixmx]
+        data = chart._flows[chart.name].shm.array[ixmn:ixmx]
 
         if len(data):
             std = data['close'].std()

piker/ui/_fsp.py

@@ -72,12 +72,17 @@ def has_vlm(ohlcv: ShmArray) -> bool:
 
 def update_fsp_chart(
     chart: ChartPlotWidget,
-    shm: ShmArray,
+    flow,
     graphics_name: str,
     array_key: Optional[str],
+    **kwargs,
 
 ) -> None:
 
+    shm = flow.shm
+    if not shm:
+        return
+
     array = shm.array
     last_row = try_read(array)
 
@@ -89,10 +94,10 @@ def update_fsp_chart(
     # update graphics
     # NOTE: this does a length check internally which allows it
     # staying above the last row check below..
-    chart.update_curve_from_array(
+    chart.update_graphics_from_flow(
         graphics_name,
-        array,
         array_key=array_key or graphics_name,
+        **kwargs,
     )
 
     # XXX: re: ``array_key``: fsp func names must be unique meaning we
@@ -102,9 +107,6 @@ def update_fsp_chart(
     # read from last calculated value and update any label
     last_val_sticky = chart._ysticks.get(graphics_name)
     if last_val_sticky:
-        # array = shm.array[array_key]
-        # if len(array):
-        #     value = array[-1]
         last = last_row[array_key]
         last_val_sticky.update_from_data(-1, last)
 
@@ -242,21 +244,18 @@ async def run_fsp_ui(
 
             chart.draw_curve(
                 name=name,
-                data=shm.array,
+                shm=shm,
                 overlay=True,
                 color='default_light',
                 array_key=name,
-                separate_axes=conf.get('separate_axes', False),
                 **conf.get('chart_kwargs', {})
             )
-            # specially store ref to shm for lookup in display loop
-            chart._flows[name].shm = shm
 
         else:
             # create a new sub-chart widget for this fsp
             chart = linkedsplits.add_plot(
                 name=name,
-                array=shm.array,
+                shm=shm,
 
                 array_key=name,
                 sidepane=sidepane,
@@ -268,11 +267,6 @@ async def run_fsp_ui(
                 **conf.get('chart_kwargs', {})
             )
 
-            # XXX: ONLY for sub-chart fsps, overlays have their
-            # data looked up from the chart's internal array set.
-            # TODO: we must get a data view api going STAT!!
-            chart._shm = shm
-
             # should **not** be the same sub-chart widget
             assert chart.name != linkedsplits.chart.name
 
@@ -283,7 +277,7 @@ async def run_fsp_ui(
         # first UI update, usually from shm pushed history
         update_fsp_chart(
             chart,
-            shm,
+            chart._flows[array_key],
             name,
             array_key=array_key,
         )
@@ -426,6 +420,7 @@ class FspAdmin:
             ) as (ctx, last_index),
             ctx.open_stream() as stream,
         ):
+
             # register output data
             self._registry[
                 (fqsn, ns_path)
@@ -438,6 +433,17 @@ class FspAdmin:
             started.set()
 
             # wait for graceful shutdown signal
+            async with stream.subscribe() as stream:
+                async for msg in stream:
+                    if msg == 'update':
+                        # if the chart isn't hidden try to update
+                        # the data on screen.
+                        if not self.linked.isHidden():
+                            log.info(f'Re-syncing graphics for fsp: {ns_path}')
+                            self.linked.graphics_cycle(trigger_all=True)
+                    else:
+                        log.info(f'recved unexpected fsp engine msg: {msg}')
+
             await complete.wait()
 
     async def start_engine_task(
@@ -610,7 +616,7 @@ async def open_vlm_displays(
         shm = ohlcv
         chart = linked.add_plot(
             name='volume',
-            array=shm.array,
+            shm=shm,
 
             array_key='volume',
             sidepane=sidepane,
@@ -649,11 +655,6 @@ async def open_vlm_displays(
         # chart.hideAxis('right')
         # chart.showAxis('left')
 
-        # XXX: ONLY for sub-chart fsps, overlays have their
-        # data looked up from the chart's internal array set.
-        # TODO: we must get a data view api going STAT!!
-        chart._shm = shm
-
         # send back new chart to caller
         task_status.started(chart)
 
@@ -668,9 +669,9 @@ async def open_vlm_displays(
 
         last_val_sticky.update_from_data(-1, value)
 
-        vlm_curve = chart.update_curve_from_array(
+        vlm_curve = chart.update_graphics_from_flow(
             'volume',
-            shm.array,
+            # shm.array,
         )
 
         # size view to data once at outset
@@ -745,19 +746,14 @@ async def open_vlm_displays(
                 'dark_trade_rate',
             ]
 
-            # add custom auto range handler
-            dvlm_pi.vb._maxmin = partial(
+            group_mxmn = partial(
                 maxmin,
                 # keep both regular and dark vlm in view
                 names=fields + dvlm_rate_fields,
             )
 
-            # TODO: is there a way to "sync" the dual axes such that only
-            # one curve is needed?
-            # hide the original vlm curve since the $vlm one is now
-            # displayed and the curves are effectively the same minus
-            # liquidity events (well at least on low OHLC periods - 1s).
-            vlm_curve.hide()
+            # add custom auto range handler
+            dvlm_pi.vb._maxmin = group_mxmn
 
             # use slightly less light (then bracket) gray
             # for volume from "main exchange" and a more "bluey"
@@ -783,21 +779,22 @@ async def open_vlm_displays(
                         color = 'bracket'
 
                     curve, _ = chart.draw_curve(
-                        # name='dolla_vlm',
                         name=name,
-                        data=shm.array,
+                        shm=shm,
                         array_key=name,
                         overlay=pi,
                         color=color,
                         step_mode=step_mode,
                         style=style,
+                        pi=pi,
                     )
 
                     # TODO: we need a better API to do this..
                     # specially store ref to shm for lookup in display loop
                     # since only a placeholder of `None` is entered in
                     # ``.draw_curve()``.
-                    chart._flows[name].shm = shm
+                    flow = chart._flows[name]
+                    assert flow.plot is pi
 
             chart_curves(
                 fields,
@@ -825,6 +822,19 @@ async def open_vlm_displays(
                 fr_shm,
             )
 
+            # TODO: is there a way to "sync" the dual axes such that only
+            # one curve is needed?
+            # hide the original vlm curve since the $vlm one is now
+            # displayed and the curves are effectively the same minus
+            # liquidity events (well at least on low OHLC periods - 1s).
+            vlm_curve.hide()
+            chart.removeItem(vlm_curve)
+            vflow = chart._flows['volume']
+            vflow.render = False
+
+            # avoid range sorting on volume once disabled
+            chart.view.disable_auto_yrange()
+
             # Trade rate overlay
             # XXX: requires an additional overlay for
             # a trades-per-period (time) y-range.
@@ -864,7 +874,10 @@ async def open_vlm_displays(
                 style='dash',
             )
 
-            for pi in (dvlm_pi, tr_pi):
+            for pi in (
+                dvlm_pi,
+                tr_pi,
+            ):
                 for name, axis_info in pi.axes.items():
                     # lol this sux XD
                     axis = axis_info['item']
@@ -873,10 +886,10 @@ async def open_vlm_displays(
 
         # built-in vlm fsps
         for target, conf in {
-            tina_vwap: {
-                'overlay': 'ohlc',  # overlays with OHLCV (main) chart
-                'anchor': 'session',
-            },
+            # tina_vwap: {
+            #     'overlay': 'ohlc',  # overlays with OHLCV (main) chart
+            #     'anchor': 'session',
+            # },
         }.items():
             started = await admin.open_fsp_chart(
                 target,

piker/ui/_interaction.py

@@ -33,7 +33,8 @@ import numpy as np
 import trio
 
 from ..log import get_logger
-from ._style import _min_points_to_show
+from .._profile import pg_profile_enabled, ms_slower_then
+# from ._style import _min_points_to_show
 from ._editors import SelectRect
 from . import _event
 
@@ -318,6 +319,7 @@ async def handle_viewmode_mouse(
         ):
             # when in order mode, submit execution
             # msg.event.accept()
+            # breakpoint()
             view.order_mode.submit_order()
 
 
@@ -356,13 +358,13 @@ class ChartView(ViewBox):
     ):
         super().__init__(
             parent=parent,
+            name=name,
             # TODO: look into the default view padding
             # support that might replace somem of our
             # ``ChartPlotWidget._set_yrange()`
             # defaultPadding=0.,
             **kwargs
         )
-
         # for "known y-range style"
         self._static_yrange = static_yrange
         self._maxmin = None
@@ -384,6 +386,34 @@ class ChartView(ViewBox):
         self.order_mode: bool = False
 
         self.setFocusPolicy(QtCore.Qt.StrongFocus)
+        self._ic = None
+
+    def start_ic(
+        self,
+    ) -> None:
+        '''
+        Signal the beginning of a click-drag interaction
+        to any interested task waiters.
+
+        '''
+        if self._ic is None:
+            self.chart.pause_all_feeds()
+            self._ic = trio.Event()
+
+    def signal_ic(
+        self,
+        *args,
+
+    ) -> None:
+        '''
+        Signal the end of a click-drag interaction
+        to any waiters.
+
+        '''
+        if self._ic:
+            self._ic.set()
+            self._ic = None
+            self.chart.resume_all_feeds()
 
     @asynccontextmanager
     async def open_async_input_handler(
@@ -435,7 +465,8 @@ class ChartView(ViewBox):
         axis=None,
         relayed_from: ChartView = None,
     ):
-        '''Override "center-point" location for scrolling.
+        '''
+        Override "center-point" location for scrolling.
 
         This is an override of the ``ViewBox`` method simply changing
         the center of the zoom to be the y-axis.
@@ -453,15 +484,18 @@ class ChartView(ViewBox):
 
         # don't zoom more then the min points setting
         l, lbar, rbar, r = chart.bars_range()
-        vl = r - l
+        # vl = r - l
 
-        if ev.delta() > 0 and vl <= _min_points_to_show:
-            log.debug("Max zoom bruh...")
-            return
+        # if ev.delta() > 0 and vl <= _min_points_to_show:
+        #     log.debug("Max zoom bruh...")
+        #     return
 
-        if ev.delta() < 0 and vl >= len(chart._arrays[chart.name]) + 666:
-            log.debug("Min zoom bruh...")
-            return
+        # if (
+        #     ev.delta() < 0
+        #     and vl >= len(chart._flows[chart.name].shm.array) + 666
+        # ):
+        #     log.debug("Min zoom bruh...")
+        #     return
 
         # actual scaling factor
         s = 1.015 ** (ev.delta() * -1 / 20)  # self.state['wheelScaleFactor'])
@@ -535,7 +569,23 @@ class ChartView(ViewBox):
 
             self._resetTarget()
             self.scaleBy(s, focal)
+
+            # XXX: without this is seems as though sometimes
+            # when zooming in from far out (and maybe vice versa?)
+            # the signal isn't being fired enough since if you pan
+            # just after you'll see further downsampling code run
+            # (pretty noticeable on the OHLC ds curve) but with this
+            # that never seems to happen? Only question is how much this
+            # "double work" is causing latency when these missing event
+            # fires don't happen?
+            self.maybe_downsample_graphics()
+
             self.sigRangeChangedManually.emit(mask)
+
+            # self._ic.set()
+            # self._ic = None
+            # self.chart.resume_all_feeds()
+
             ev.accept()
 
     def mouseDragEvent(
@@ -618,6 +668,11 @@ class ChartView(ViewBox):
                 # XXX: WHY
                 ev.accept()
 
+                self.start_ic()
+                # if self._ic is None:
+                #     self.chart.pause_all_feeds()
+                #     self._ic = trio.Event()
+
                 if axis == 1:
                     self.chart._static_yrange = 'axis'
 
@@ -635,6 +690,12 @@ class ChartView(ViewBox):
 
                 self.sigRangeChangedManually.emit(self.state['mouseEnabled'])
 
+                if ev.isFinish():
+                    self.signal_ic()
+                    # self._ic.set()
+                    # self._ic = None
+                    # self.chart.resume_all_feeds()
+
         # WEIRD "RIGHT-CLICK CENTER ZOOM" MODE
         elif button & QtCore.Qt.RightButton:
 
@@ -685,7 +746,7 @@ class ChartView(ViewBox):
 
         # flag to prevent triggering sibling charts from the same linked
         # set from recursion errors.
-        autoscale_linked_plots: bool = True,
+        autoscale_linked_plots: bool = False,
         name: Optional[str] = None,
         # autoscale_overlays: bool = False,
 
@@ -698,6 +759,12 @@ class ChartView(ViewBox):
         data set.
 
         '''
+        profiler = pg.debug.Profiler(
+            msg=f'`ChartView._set_yrange()`: `{self.name}`',
+            disabled=not pg_profile_enabled(),
+            gt=ms_slower_then,
+            delayed=True,
+        )
         set_range = True
         chart = self._chart
 
@@ -723,34 +790,51 @@ class ChartView(ViewBox):
 
         # calculate max, min y values in viewable x-range from data.
         # Make sure min bars/datums on screen is adhered.
-        else:
-            br = bars_range or chart.bars_range()
+        # else:
+            # TODO: eventually we should point to the
+            # ``FlowsTable`` (or wtv) which should perform
+            # the group operations?
+
+            # flow = chart._flows[name or chart.name]
+            # br = bars_range or chart.bars_range()
+            # br = bars_range or chart.bars_range()
+            # profiler(f'got bars range: {br}')
 
             # TODO: maybe should be a method on the
             # chart widget/item?
-            if autoscale_linked_plots:
-                # avoid recursion by sibling plots
-                linked = self.linkedsplits
-                plots = list(linked.subplots.copy().values())
-                main = linked.chart
-                if main:
-                    plots.append(main)
+            # if False:
+            # if autoscale_linked_plots:
+            #     # avoid recursion by sibling plots
+            #     linked = self.linkedsplits
+            #     plots = list(linked.subplots.copy().values())
+            #     main = linked.chart
+            #     if main:
+            #         plots.append(main)
 
-                for chart in plots:
-                    if chart and not chart._static_yrange:
-                        chart.cv._set_yrange(
-                            bars_range=br,
-                            autoscale_linked_plots=False,
-                        )
+            #     for chart in plots:
+            #         if chart and not chart._static_yrange:
+            #             chart.cv._set_yrange(
+            #                 # bars_range=br,
+            #                 autoscale_linked_plots=False,
+            #             )
+            #     profiler('autoscaled linked plots')
 
         if set_range:
 
+            if not yrange:
+                # XXX: only compute the mxmn range
+                # if none is provided as input!
                 yrange = self._maxmin()
+
                 if yrange is None:
+                    log.warning(f'No yrange provided for {self.name}!?')
+                    print(f"WTF NO YRANGE {self.name}")
                     return
 
             ylow, yhigh = yrange
 
+            profiler(f'maxmin(): {yrange}')
+
             # view margins: stay within a % of the "true range"
             diff = yhigh - ylow
             ylow = ylow - (diff * range_margin)
@@ -764,9 +848,13 @@ class ChartView(ViewBox):
                 yMax=yhigh,
             )
             self.setYRange(ylow, yhigh)
+            profiler(f'set limits: {(ylow, yhigh)}')
+
+        profiler.finish()
 
     def enable_auto_yrange(
-        vb: ChartView,
+        self,
+        src_vb: Optional[ChartView] = None,
 
     ) -> None:
         '''
@@ -774,13 +862,105 @@ class ChartView(ViewBox):
         based on data contents and ``ViewBox`` state.
 
         '''
-        vb.sigXRangeChanged.connect(vb._set_yrange)
+        if src_vb is None:
+            src_vb = self
+
+        # splitter(s) resizing
+        src_vb.sigResized.connect(self._set_yrange)
+
+        # TODO: a smarter way to avoid calling this needlessly?
+        # 2 things i can think of:
+        # - register downsample-able graphics specially and only
+        #   iterate those.
+        # - only register this when certain downsampleable graphics are
+        #   "added to scene".
+        src_vb.sigRangeChangedManually.connect(
+            self.maybe_downsample_graphics
+        )
+
         # mouse wheel doesn't emit XRangeChanged
-        vb.sigRangeChangedManually.connect(vb._set_yrange)
-        vb.sigResized.connect(vb._set_yrange)  # splitter(s) resizing
+        src_vb.sigRangeChangedManually.connect(self._set_yrange)
 
-    def disable_auto_yrange(
-        self,
-    ) -> None:
+        # src_vb.sigXRangeChanged.connect(self._set_yrange)
+        # src_vb.sigXRangeChanged.connect(
+        #     self.maybe_downsample_graphics
+        # )
 
-        self._chart._static_yrange = 'axis'
+    def disable_auto_yrange(self) -> None:
+
+        self.sigResized.disconnect(
+            self._set_yrange,
+        )
+        self.sigRangeChangedManually.disconnect(
+            self.maybe_downsample_graphics
+        )
+        self.sigRangeChangedManually.disconnect(
+            self._set_yrange,
+        )
+
+        # self.sigXRangeChanged.disconnect(self._set_yrange)
+        # self.sigXRangeChanged.disconnect(
+        #     self.maybe_downsample_graphics
+        # )
+
+    def x_uppx(self) -> float:
+        '''
+        Return the "number of x units" within a single
+        pixel currently being displayed for relevant
+        graphics items which are our children.
+
+        '''
+        graphics = [f.graphics for f in self._chart._flows.values()]
+        if not graphics:
+            return 0
+
+        for graphic in graphics:
+            xvec = graphic.pixelVectors()[0]
+            if xvec:
+                return xvec.x()
+        else:
+            return 0
+
+    def maybe_downsample_graphics(self):
+
+        profiler = pg.debug.Profiler(
+            msg=f'ChartView.maybe_downsample_graphics() for {self.name}',
+            disabled=not pg_profile_enabled(),
+
+            # XXX: important to avoid not seeing underlying
+            # ``.update_graphics_from_flow()`` nested profiling likely
+            # due to the way delaying works and garbage collection of
+            # the profiler in the delegated method calls.
+            delayed=False,
+            # gt=3,
+            gt=ms_slower_then,
+        )
+
+        # TODO: a faster single-loop-iterator way of doing this XD
+        chart = self._chart
+        linked = self.linkedsplits
+        plots = linked.subplots | {chart.name: chart}
+        for chart_name, chart in plots.items():
+            for name, flow in chart._flows.items():
+
+                if (
+                    not flow.render
+
+                    # XXX: super important to be aware of this.
+                    # or not flow.graphics.isVisible()
+                ):
+                    continue
+
+                # pass in no array which will read and render from the last
+                # passed array (normally provided by the display loop.)
+                chart.update_graphics_from_flow(
+                    name,
+                    use_vr=True,
+
+                    # gets passed down into graphics obj
+                    profiler=profiler,
+                )
+
+                profiler(f'range change updated {chart_name}:{name}')
+
+        profiler.finish()

piker/ui/_lines.py

@@ -20,7 +20,7 @@ Lines for orders, alerts, L2.
 """
 from functools import partial
 from math import floor
-from typing import Tuple, Optional, List, Callable
+from typing import Optional, Callable
 
 import pyqtgraph as pg
 from pyqtgraph import Point, functions as fn
@@ -29,10 +29,8 @@ from PyQt5.QtCore import QPointF
 
 from ._annotate import qgo_draw_markers, LevelMarker
 from ._anchors import (
-    marker_right_points,
     vbr_left,
     right_axis,
-    # pp_tight_and_right,  # wanna keep it straight in the long run
     gpath_pin,
 )
 from ..calc import humanize
@@ -104,8 +102,8 @@ class LevelLine(pg.InfiniteLine):
 
         # list of labels anchored at one of the 2 line endpoints
         # inside the viewbox
-        self._labels: List[Label] = []
-        self._markers: List[(int, Label)] = []
+        self._labels: list[Label] = []
+        self._markers: list[(int, Label)] = []
 
         # whenever this line is moved trigger label updates
         self.sigPositionChanged.connect(self.on_pos_change)
@@ -124,7 +122,7 @@ class LevelLine(pg.InfiniteLine):
         self._y_incr_mult = 1 / chart.linked.symbol.tick_size
         self._right_end_sc: float = 0
 
-    def txt_offsets(self) -> Tuple[int, int]:
+    def txt_offsets(self) -> tuple[int, int]:
         return 0, 0
 
     @property
@@ -315,17 +313,6 @@ class LevelLine(pg.InfiniteLine):
         # TODO: enter labels edit mode
         print(f'double click {ev}')
 
-    def right_point(
-        self,
-    ) -> float:
-
-        chart = self._chart
-        l1_len = chart._max_l1_line_len
-        ryaxis = chart.getAxis('right')
-        up_to_l1_sc = ryaxis.pos().x() - l1_len
-
-        return up_to_l1_sc
-
     def paint(
         self,
 
@@ -345,7 +332,7 @@ class LevelLine(pg.InfiniteLine):
         vb_left, vb_right = self._endPoints
         vb = self.getViewBox()
 
-        line_end, marker_right, r_axis_x = marker_right_points(self._chart)
+        line_end, marker_right, r_axis_x = self._chart.marker_right_points()
 
         if self.show_markers and self.markers:
 
@@ -411,7 +398,7 @@ class LevelLine(pg.InfiniteLine):
     def scene_endpoint(self) -> QPointF:
 
         if not self._right_end_sc:
-            line_end, _, _ = marker_right_points(self._chart)
+            line_end, _, _ = self._chart.marker_right_points()
             self._right_end_sc = line_end - 10
 
         return QPointF(self._right_end_sc, self.scene_y())
@@ -422,23 +409,23 @@ class LevelLine(pg.InfiniteLine):
 
     ) -> QtWidgets.QGraphicsPathItem:
 
+        self._marker = path
+        self._marker.setPen(self.currentPen)
+        self._marker.setBrush(fn.mkBrush(self.currentPen.color()))
         # add path to scene
         self.getViewBox().scene().addItem(path)
 
-        self._marker = path
-
-        rsc = self.right_point()
-
-        self._marker.setPen(self.currentPen)
-        self._marker.setBrush(fn.mkBrush(self.currentPen.color()))
+        # place to just-left of L1 labels
+        rsc = self._chart.pre_l1_xs()[0]
         path.setPos(QPointF(rsc, self.scene_y()))
 
         return path
 
     def hoverEvent(self, ev):
-        """Mouse hover callback.
+        '''
+        Mouse hover callback.
 
-        """
+        '''
         cur = self._chart.linked.cursor
 
         # hovered
@@ -614,7 +601,8 @@ def order_line(
     **line_kwargs,
 
 ) -> LevelLine:
-    '''Convenience routine to add a line graphic representing an order
+    '''
+    Convenience routine to add a line graphic representing an order
     execution submitted to the EMS via the chart's "order mode".
 
     '''
@@ -689,7 +677,6 @@ def order_line(
 
             return f'{account}: '
 
-
         label.fields = {
             'size': size,
             'size_digits': 0,

piker/ui/_ohlc.py

@@ -17,7 +17,11 @@
 Super fast OHLC sampling graphics types.
 
 """
-from typing import List, Optional, Tuple
+from __future__ import annotations
+from typing import (
+    Optional,
+    TYPE_CHECKING,
+)
 
 import numpy as np
 import pyqtgraph as pg
@@ -27,30 +31,29 @@ from PyQt5.QtCore import QLineF, QPointF
 # from numba import types as ntypes
 # from ..data._source import numba_ohlc_dtype
 
-from .._profile import pg_profile_enabled
+from .._profile import pg_profile_enabled, ms_slower_then
 from ._style import hcolor
+from ..log import get_logger
+from ._curve import FastAppendCurve
+from ._compression import ohlc_flatten
+
+if TYPE_CHECKING:
+    from ._chart import LinkedSplits
 
 
-def _mk_lines_array(
-    data: List,
-    size: int,
-    elements_step: int = 6,
-) -> np.ndarray:
-    """Create an ndarray to hold lines graphics info.
-
-    """
-    return np.zeros_like(
-        data,
-        shape=(int(size), elements_step),
-        dtype=object,
-    )
+log = get_logger(__name__)
 
 
-def lines_from_ohlc(
+def bar_from_ohlc_row(
     row: np.ndarray,
-    w: float
-) -> Tuple[QLineF]:
+    w: float = 0.43
 
+) -> tuple[QLineF]:
+    '''
+    Generate the minimal ``QLineF`` lines to construct a single
+    OHLC "bar" for use in the "last datum" of a series.
+
+    '''
     open, high, low, close, index = row[
         ['open', 'high', 'low', 'close', 'index']]
 
@@ -84,7 +87,7 @@ def lines_from_ohlc(
 @njit(
     # TODO: for now need to construct this manually for readonly arrays, see
     # https://github.com/numba/numba/issues/4511
-    # ntypes.Tuple((float64[:], float64[:], float64[:]))(
+    # ntypes.tuple((float64[:], float64[:], float64[:]))(
     #     numba_ohlc_dtype[::1],  # contiguous
     #     int64,
     #     optional(float64),
@@ -95,10 +98,12 @@ def path_arrays_from_ohlc(
     data: np.ndarray,
     start: int64,
     bar_gap: float64 = 0.43,
-) -> np.ndarray:
-    """Generate an array of lines objects from input ohlc data.
 
-    """
+) -> np.ndarray:
+    '''
+    Generate an array of lines objects from input ohlc data.
+
+    '''
     size = int(data.shape[0] * 6)
 
     x = np.zeros(
@@ -152,26 +157,51 @@ def path_arrays_from_ohlc(
 
 
 def gen_qpath(
-    data,
-    start,  # XXX: do we need this?
-    w,
+    data: np.ndarray,
+    start: int = 0,  # XXX: do we need this?
+    # 0.5 is no overlap between arms, 1.0 is full overlap
+    w: float = 0.43,
+    path: Optional[QtGui.QPainterPath] = None,
+
 ) -> QtGui.QPainterPath:
 
-    profiler = pg.debug.Profiler(disabled=not pg_profile_enabled())
+    path_was_none = path is None
 
-    x, y, c = path_arrays_from_ohlc(data, start, bar_gap=w)
+    profiler = pg.debug.Profiler(
+        msg='gen_qpath ohlc',
+        disabled=not pg_profile_enabled(),
+        gt=ms_slower_then,
+    )
+
+    x, y, c = path_arrays_from_ohlc(
+        data,
+        start,
+        bar_gap=w,
+    )
     profiler("generate stream with numba")
 
     # TODO: numba the internals of this!
-    path = pg.functions.arrayToQPath(x, y, connect=c)
+    path = pg.functions.arrayToQPath(
+        x,
+        y,
+        connect=c,
+        path=path,
+    )
+
+    # avoid mem allocs if possible
+    if path_was_none:
+        path.reserve(path.capacity())
+
     profiler("generate path with arrayToQPath")
 
     return path
 
 
 class BarItems(pg.GraphicsObject):
-    """Price range bars graphics rendered from a OHLC sequence.
-    """
+    '''
+    "Price range" bars graphics rendered from a OHLC sampled sequence.
+
+    '''
     sigPlotChanged = QtCore.pyqtSignal(object)
 
     # 0.5 is no overlap between arms, 1.0 is full overlap
@@ -179,17 +209,26 @@ class BarItems(pg.GraphicsObject):
 
     def __init__(
         self,
-        # scene: 'QGraphicsScene',  # noqa
+        linked: LinkedSplits,
         plotitem: 'pg.PlotItem',  # noqa
         pen_color: str = 'bracket',
         last_bar_color: str = 'bracket',
+
+        name: Optional[str] = None,
+
     ) -> None:
         super().__init__()
-
+        self.linked = linked
         # XXX: for the mega-lulz increasing width here increases draw
         # latency...  so probably don't do it until we figure that out.
+        self._color = pen_color
         self.bars_pen = pg.mkPen(hcolor(pen_color), width=1)
         self.last_bar_pen = pg.mkPen(hcolor(last_bar_color), width=2)
+        self._name = name
+
+        self._ds_line_xy: Optional[
+            tuple[np.ndarray, np.ndarray]
+        ] = None
 
         # NOTE: this prevents redraws on mouse interaction which is
         # a huge boon for avg interaction latency.
@@ -200,50 +239,79 @@ class BarItems(pg.GraphicsObject):
         # that mode?
         self.setCacheMode(QtWidgets.QGraphicsItem.DeviceCoordinateCache)
 
-        # not sure if this is actually impoving anything but figured it
-        # was worth a shot:
-        # self.path.reserve(int(100e3 * 6))
-
-        self.path = QtGui.QPainterPath()
-
         self._pi = plotitem
+        self.path = QtGui.QPainterPath()
+        self.fast_path = QtGui.QPainterPath()
 
-        self._xrange: Tuple[int, int]
-        self._yrange: Tuple[float, float]
+        self._xrange: tuple[int, int]
+        # self._yrange: tuple[float, float]
+        self._vrange = None
 
         # TODO: don't render the full backing array each time
         # self._path_data = None
-        self._last_bar_lines: Optional[Tuple[QLineF, ...]] = None
+        self._last_bar_lines: Optional[tuple[QLineF, ...]] = None
 
         # track the current length of drawable lines within the larger array
         self.start_index: int = 0
         self.stop_index: int = 0
 
+        # downsampler-line state
+        self._in_ds: bool = False
+        self._ds_line: Optional[FastAppendCurve] = None
+        self._dsi: tuple[int, int] = 0, 0
+        self._xs_in_px: float = 0
+
     def draw_from_data(
         self,
-        data: np.ndarray,
+        ohlc: np.ndarray,
         start: int = 0,
+
     ) -> QtGui.QPainterPath:
-        """Draw OHLC datum graphics from a ``np.ndarray``.
+        '''
+        Draw OHLC datum graphics from a ``np.ndarray``.
 
         This routine is usually only called to draw the initial history.
-        """
-        hist, last = data[:-1], data[-1]
 
+        '''
+        hist, last = ohlc[:-1], ohlc[-1]
         self.path = gen_qpath(hist, start, self.w)
 
         # save graphics for later reference and keep track
         # of current internal "last index"
-        # self.start_index = len(data)
-        index = data['index']
+        # self.start_index = len(ohlc)
+        index = ohlc['index']
         self._xrange = (index[0], index[-1])
-        self._yrange = (
-            np.nanmax(data['high']),
-            np.nanmin(data['low']),
-        )
+        # self._yrange = (
+        #     np.nanmax(ohlc['high']),
+        #     np.nanmin(ohlc['low']),
+        # )
 
         # up to last to avoid double draw of last bar
-        self._last_bar_lines = lines_from_ohlc(last, self.w)
+        self._last_bar_lines = bar_from_ohlc_row(last, self.w)
+
+        x, y = self._ds_line_xy = ohlc_flatten(ohlc)
+
+        # TODO: figuring out the most optimial size for the ideal
+        # curve-path by,
+        # - calcing the display's max px width `.screen()`
+        # - drawing a curve and figuring out it's capacity:
+        #   https://doc.qt.io/qt-5/qpainterpath.html#capacity
+        # - reserving that cap for each curve-mapped-to-shm with
+
+        # - leveraging clearing when needed to redraw the entire
+        #   curve that does not release mem allocs:
+        #   https://doc.qt.io/qt-5/qpainterpath.html#clear
+        curve = FastAppendCurve(
+            y=y,
+            x=x,
+            name='OHLC',
+            color=self._color,
+        )
+        curve.hide()
+        self._pi.addItem(curve)
+        self._ds_line = curve
+
+        # self._ds_xrange = (index[0], index[-1])
 
         # trigger render
         # https://doc.qt.io/qt-5/qgraphicsitem.html#update
@@ -251,78 +319,305 @@ class BarItems(pg.GraphicsObject):
 
         return self.path
 
-    def update_from_array(
+    def x_uppx(self) -> int:
+        if self._ds_line:
+            return self._ds_line.x_uppx()
+        else:
+            return 0
+
+    # def update_from_array(
+    #     self,
+
+    #     # full array input history
+    #     ohlc: np.ndarray,
+
+    #     # pre-sliced array data that's "in view"
+    #     ohlc_iv: np.ndarray,
+
+    #     view_range: Optional[tuple[int, int]] = None,
+    #     profiler: Optional[pg.debug.Profiler] = None,
+
+    # ) -> None:
+    #     '''
+    #     Update the last datum's bar graphic from input data array.
+
+    #     This routine should be interface compatible with
+    #     ``pg.PlotCurveItem.setData()``. Normally this method in
+    #     ``pyqtgraph`` seems to update all the data passed to the
+    #     graphics object, and then update/rerender, but here we're
+    #     assuming the prior graphics havent changed (OHLC history rarely
+    #     does) so this "should" be simpler and faster.
+
+    #     This routine should be made (transitively) as fast as possible.
+
+    #     '''
+    #     profiler = profiler or pg.debug.Profiler(
+    #         disabled=not pg_profile_enabled(),
+    #         gt=ms_slower_then,
+    #         delayed=True,
+    #     )
+
+    #     # index = self.start_index
+    #     istart, istop = self._xrange
+    #     # ds_istart, ds_istop = self._ds_xrange
+
+    #     index = ohlc['index']
+    #     first_index, last_index = index[0], index[-1]
+
+    #     # length = len(ohlc)
+    #     # prepend_length = istart - first_index
+    #     # append_length = last_index - istop
+
+    #     # ds_prepend_length = ds_istart - first_index
+    #     # ds_append_length = last_index - ds_istop
+
+    #     flip_cache = False
+
+    #     x_gt = 16
+    #     if self._ds_line:
+    #         uppx = self._ds_line.x_uppx()
+    #     else:
+    #         uppx = 0
+
+    #     should_line = self._in_ds
+    #     if (
+    #         self._in_ds
+    #         and uppx < x_gt
+    #     ):
+    #         should_line = False
+
+    #     elif (
+    #         not self._in_ds
+    #         and uppx >= x_gt
+    #     ):
+    #         should_line = True
+
+    #     profiler('ds logic complete')
+
+    #     if should_line:
+    #         # update the line graphic
+    #         # x, y = self._ds_line_xy = ohlc_flatten(ohlc_iv)
+    #         x, y = self._ds_line_xy = ohlc_flatten(ohlc)
+    #         x_iv, y_iv = self._ds_line_xy = ohlc_flatten(ohlc_iv)
+    #         profiler('flattening bars to line')
+
+    #         # TODO: we should be diffing the amount of new data which
+    #         # needs to be downsampled. Ideally we actually are just
+    #         # doing all the ds-ing in sibling actors so that the data
+    #         # can just be read and rendered to graphics on events of our
+    #         # choice.
+    #         # diff = do_diff(ohlc, new_bit)
+    #         curve = self._ds_line
+    #         curve.update_from_array(
+    #             x=x,
+    #             y=y,
+    #             x_iv=x_iv,
+    #             y_iv=y_iv,
+    #             view_range=None,  # hack
+    #             profiler=profiler,
+    #         )
+    #         profiler('updated ds line')
+
+    #         if not self._in_ds:
+    #             # hide bars and show line
+    #             self.hide()
+    #             # XXX: is this actually any faster?
+    #             # self._pi.removeItem(self)
+
+    #             # TODO: a `.ui()` log level?
+    #             log.info(
+    #                 f'downsampling to line graphic {self._name}'
+    #             )
+
+    #             # self._pi.addItem(curve)
+    #             curve.show()
+    #             curve.update()
+    #             self._in_ds = True
+
+    #         # stop here since we don't need to update bars path any more
+    #         # as we delegate to the downsample line with updates.
+
+    #     else:
+    #         # we should be in bars mode
+
+    #         if self._in_ds:
+    #             # flip back to bars graphics and hide the downsample line.
+    #             log.info(f'showing bars graphic {self._name}')
+
+    #             curve = self._ds_line
+    #             curve.hide()
+    #             # self._pi.removeItem(curve)
+
+    #             # XXX: is this actually any faster?
+    #             # self._pi.addItem(self)
+    #             self.show()
+    #             self._in_ds = False
+
+    #         # generate in_view path
+    #         self.path = gen_qpath(
+    #             ohlc_iv,
+    #             0,
+    #             self.w,
+    #             # path=self.path,
+    #         )
+
+    #         # TODO: to make the downsampling faster
+    #         # - allow mapping only a range of lines thus only drawing as
+    #         #   many bars as exactly specified.
+    #         # - move ohlc "flattening" to a shmarr
+    #         # - maybe move all this embedded logic to a higher
+    #         #   level type?
+
+    #         # if prepend_length:
+    #         #     # new history was added and we need to render a new path
+    #         #     prepend_bars = ohlc[:prepend_length]
+
+    #         # if ds_prepend_length:
+    #         #     ds_prepend_bars = ohlc[:ds_prepend_length]
+    #         #     pre_x, pre_y = ohlc_flatten(ds_prepend_bars)
+    #         #     fx = np.concatenate((pre_x, fx))
+    #         #     fy = np.concatenate((pre_y, fy))
+    #         #     profiler('ds line prepend diff complete')
+
+    #         # if append_length:
+    #         #     # generate new graphics to match provided array
+    #         #     # path appending logic:
+    #         #     # we need to get the previous "current bar(s)" for the time step
+    #         #     # and convert it to a sub-path to append to the historical set
+    #         #     # new_bars = ohlc[istop - 1:istop + append_length - 1]
+    #         #     append_bars = ohlc[-append_length - 1:-1]
+    #         #     # print(f'ohlc bars to append size: {append_bars.size}\n')
+
+    #         # if ds_append_length:
+    #         #     ds_append_bars = ohlc[-ds_append_length - 1:-1]
+    #         #     post_x, post_y = ohlc_flatten(ds_append_bars)
+    #         #     print(
+    #         #         f'ds curve to append sizes: {(post_x.size, post_y.size)}'
+    #         #     )
+    #         #     fx = np.concatenate((fx, post_x))
+    #         #     fy = np.concatenate((fy, post_y))
+
+    #         #     profiler('ds line append diff complete')
+
+    #         profiler('array diffs complete')
+
+    #         # does this work?
+    #         last = ohlc[-1]
+    #         # fy[-1] = last['close']
+
+    #         # # incremental update and cache line datums
+    #         # self._ds_line_xy = fx, fy
+
+    #         # maybe downsample to line
+    #         # ds = self.maybe_downsample()
+    #         # if ds:
+    #         #     # if we downsample to a line don't bother with
+    #         #     # any more path generation / updates
+    #         #     self._ds_xrange = first_index, last_index
+    #         #     profiler('downsampled to line')
+    #         #     return
+
+    #         # print(in_view.size)
+
+    #         # if self.path:
+    #         #     self.path = path
+    #         #     self.path.reserve(path.capacity())
+    #         #     self.path.swap(path)
+
+    #         # path updates
+    #         # if prepend_length:
+    #         #     # XXX: SOMETHING IS MAYBE FISHY HERE what with the old_path
+    #         #     # y value not matching the first value from
+    #         #     # ohlc[prepend_length + 1] ???
+    #         #     prepend_path = gen_qpath(prepend_bars, 0, self.w)
+    #         #     old_path = self.path
+    #         #     self.path = prepend_path
+    #         #     self.path.addPath(old_path)
+    #         #     profiler('path PREPEND')
+
+    #         # if append_length:
+    #         #     append_path = gen_qpath(append_bars, 0, self.w)
+
+    #         #     self.path.moveTo(
+    #         #         float(istop - self.w),
+    #         #         float(append_bars[0]['open'])
+    #         #     )
+    #         #     self.path.addPath(append_path)
+
+    #         #     profiler('path APPEND')
+    #         #     fp = self.fast_path
+    #         #     if fp is None:
+    #         #         self.fast_path = append_path
+
+    #         #     else:
+    #         #         fp.moveTo(
+    #         #             float(istop - self.w), float(new_bars[0]['open'])
+    #         #         )
+    #         #         fp.addPath(append_path)
+
+    #         #     self.setCacheMode(QtWidgets.QGraphicsItem.NoCache)
+    #         #     flip_cache = True
+
+    #         self._xrange = first_index, last_index
+
+    #         # trigger redraw despite caching
+    #         self.prepareGeometryChange()
+
+    #         self.draw_last(last)
+
+    #         # # generate new lines objects for updatable "current bar"
+    #         # self._last_bar_lines = bar_from_ohlc_row(last, self.w)
+
+    #         # # last bar update
+    #         # i, o, h, l, last, v = last[
+    #         #     ['index', 'open', 'high', 'low', 'close', 'volume']
+    #         # ]
+    #         # # assert i == self.start_index - 1
+    #         # # assert i == last_index
+    #         # body, larm, rarm = self._last_bar_lines
+
+    #         # # XXX: is there a faster way to modify this?
+    #         # rarm.setLine(rarm.x1(), last, rarm.x2(), last)
+
+    #         # # writer is responsible for changing open on "first" volume of bar
+    #         # larm.setLine(larm.x1(), o, larm.x2(), o)
+
+    #         # if l != h:  # noqa
+
+    #         #     if body is None:
+    #         #         body = self._last_bar_lines[0] = QLineF(i, l, i, h)
+    #         #     else:
+    #         #         # update body
+    #         #         body.setLine(i, l, i, h)
+
+    #         #     # XXX: pretty sure this is causing an issue where the bar has
+    #         #     # a large upward move right before the next sample and the body
+    #         #     # is getting set to None since the next bar is flat but the shm
+    #         #     # array index update wasn't read by the time this code runs. Iow
+    #         #     # we're doing this removal of the body for a bar index that is
+    #         #     # now out of date / from some previous sample. It's weird
+    #         #     # though because i've seen it do this to bars i - 3 back?
+
+    #         profiler('last bar set')
+
+    #         self.update()
+    #         profiler('.update()')
+
+    #         if flip_cache:
+    #             self.setCacheMode(QtWidgets.QGraphicsItem.DeviceCoordinateCache)
+
+    #         # profiler.finish()
+
+    def draw_last(
         self,
-        array: np.ndarray,
-        just_history=False,
+        last: np.ndarray,
+
     ) -> None:
-        """Update the last datum's bar graphic from input data array.
-
-        This routine should be interface compatible with
-        ``pg.PlotCurveItem.setData()``. Normally this method in
-        ``pyqtgraph`` seems to update all the data passed to the
-        graphics object, and then update/rerender, but here we're
-        assuming the prior graphics havent changed (OHLC history rarely
-        does) so this "should" be simpler and faster.
-
-        This routine should be made (transitively) as fast as possible.
-        """
-        # index = self.start_index
-        istart, istop = self._xrange
-
-        index = array['index']
-        first_index, last_index = index[0], index[-1]
-
-        # length = len(array)
-        prepend_length = istart - first_index
-        append_length = last_index - istop
-
-        flip_cache = False
-
-        # TODO: allow mapping only a range of lines thus
-        # only drawing as many bars as exactly specified.
-
-        if prepend_length:
-
-            # new history was added and we need to render a new path
-            new_bars = array[:prepend_length]
-            prepend_path = gen_qpath(new_bars, 0, self.w)
-
-            # XXX: SOMETHING IS MAYBE FISHY HERE what with the old_path
-            # y value not matching the first value from
-            # array[prepend_length + 1] ???
-
-            # update path
-            old_path = self.path
-            self.path = prepend_path
-            self.path.addPath(old_path)
-
-            # trigger redraw despite caching
-            self.prepareGeometryChange()
-
-        if append_length:
         # generate new lines objects for updatable "current bar"
-            self._last_bar_lines = lines_from_ohlc(array[-1], self.w)
-
-            # generate new graphics to match provided array
-            # path appending logic:
-            # we need to get the previous "current bar(s)" for the time step
-            # and convert it to a sub-path to append to the historical set
-            # new_bars = array[istop - 1:istop + append_length - 1]
-            new_bars = array[-append_length - 1:-1]
-            append_path = gen_qpath(new_bars, 0, self.w)
-            self.path.moveTo(float(istop - self.w), float(new_bars[0]['open']))
-            self.path.addPath(append_path)
-
-            # trigger redraw despite caching
-            self.prepareGeometryChange()
-            self.setCacheMode(QtWidgets.QGraphicsItem.NoCache)
-            flip_cache = True
-
-        self._xrange = first_index, last_index
+        self._last_bar_lines = bar_from_ohlc_row(last, self.w)
 
         # last bar update
-        i, o, h, l, last, v = array[-1][
+        i, o, h, l, last, v = last[
             ['index', 'open', 'high', 'low', 'close', 'volume']
         ]
         # assert i == self.start_index - 1
@@ -351,11 +646,6 @@ class BarItems(pg.GraphicsObject):
             # now out of date / from some previous sample. It's weird
             # though because i've seen it do this to bars i - 3 back?
 
-        self.update()
-
-        if flip_cache:
-            self.setCacheMode(QtWidgets.QGraphicsItem.DeviceCoordinateCache)
-
     def boundingRect(self):
         # Qt docs: https://doc.qt.io/qt-5/qgraphicsitem.html#boundingRect
 
@@ -373,12 +663,27 @@ class BarItems(pg.GraphicsObject):
         # apparently this a lot faster says the docs?
         # https://doc.qt.io/qt-5/qpainterpath.html#controlPointRect
         hb = self.path.controlPointRect()
-        hb_tl, hb_br = hb.topLeft(), hb.bottomRight()
+        hb_tl, hb_br = (
+            hb.topLeft(),
+            hb.bottomRight(),
+        )
+
+        # fp = self.fast_path
+        # if fp:
+        #     fhb = fp.controlPointRect()
+        #     print((hb_tl, hb_br))
+        #     print(fhb)
+        #     hb_tl, hb_br = (
+        #         fhb.topLeft() + hb.topLeft(),
+        #         fhb.bottomRight() + hb.bottomRight(),
+        #     )
 
         # need to include last bar height or BR will be off
         mx_y = hb_br.y()
         mn_y = hb_tl.y()
 
+        last_lines = self._last_bar_lines
+        if last_lines:
             body_line = self._last_bar_lines[0]
             if body_line:
                 mx_y = max(mx_y, max(body_line.y1(), body_line.y2()))
@@ -405,9 +710,16 @@ class BarItems(pg.GraphicsObject):
         p: QtGui.QPainter,
         opt: QtWidgets.QStyleOptionGraphicsItem,
         w: QtWidgets.QWidget
+
     ) -> None:
 
-        profiler = pg.debug.Profiler(disabled=not pg_profile_enabled())
+        if self._in_ds:
+            return
+
+        profiler = pg.debug.Profiler(
+            disabled=not pg_profile_enabled(),
+            gt=ms_slower_then,
+        )
 
         # p.setCompositionMode(0)
 
@@ -423,4 +735,8 @@ class BarItems(pg.GraphicsObject):
 
         p.setPen(self.bars_pen)
         p.drawPath(self.path)
-        profiler('draw history path')
+        profiler(f'draw history path: {self.path.capacity()}')
+
+        # if self.fast_path:
+        #     p.drawPath(self.fast_path)
+        #     profiler('draw fast path')

piker/ui/_style.py

@@ -14,9 +14,10 @@
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
-"""
+'''
 Qt UI styling.
-"""
+
+'''
 from typing import Optional, Dict
 import math
 
@@ -202,8 +203,6 @@ _xaxis_at = 'bottom'
 # charting config
 CHART_MARGINS = (0, 0, 2, 2)
 _min_points_to_show = 6
-_bars_to_left_in_follow_mode = int(61*6)
-_bars_from_right_in_follow_mode = round(0.16 * _bars_to_left_in_follow_mode)
 _tina_mode = False
 
 

piker/ui/cli.py

@@ -122,7 +122,8 @@ def optschain(config, symbol, date, rate, test):
 @cli.command()
 @click.option(
     '--profile',
-    is_flag=True,
+    '-p',
+    default=None,
     help='Enable pyqtgraph profiling'
 )
 @click.option(
@@ -133,9 +134,16 @@ def optschain(config, symbol, date, rate, test):
 @click.argument('symbol', required=True)
 @click.pass_obj
 def chart(config, symbol, profile, pdb):
-    """Start a real-time chartng UI
-    """
+    '''
+    Start a real-time chartng UI
+
+    '''
+    # eg. ``--profile 3`` reports profiling for anything slower then 3 ms.
+    if profile is not None:
         from .. import _profile
+        _profile._pg_profile = True
+        _profile.ms_slower_then = float(profile)
+
     from ._app import _main
 
     if '.' not in symbol:
@@ -145,8 +153,6 @@ def chart(config, symbol, profile, pdb):
         ))
         return
 
-    # toggle to enable profiling
-    _profile._pg_profile = profile
 
     # global opts
     brokernames = config['brokers']

scripts/ib_data_reset.py

@@ -1,5 +1,5 @@
 # piker: trading gear for hackers
-# Copyright (C) Tyler Goodlet (in stewardship for piker0)
+# Copyright (C) Tyler Goodlet (in stewardship for pikers)
 
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License as published by
@@ -30,11 +30,13 @@ orig_win_id = t.find_focused().window
 # for tws
 win_names: list[str] = [
     'Interactive Brokers',  # tws running in i3
-    'IB Gateway.',  # gw running in i3
+    'IB Gateway',  # gw running in i3
+    # 'IB',  # gw running in i3 (newer version?)
 ]
 
 for name in win_names:
-    results = t.find_named(name)
+    results = t.find_titled(name)
+    print(f'results for {name}: {results}')
     if results:
         con = results[0]
         print(f'Resetting data feed for {name}')
@@ -47,6 +49,15 @@ for name in win_names:
         # https://github.com/rr-/pyxdotool
         # https://github.com/ShaneHutter/pyxdotool
         # https://github.com/cphyc/pyxdotool
+
+        # TODO: only run the reconnect (2nd) kc on a detected
+        # disconnect?
+        for key_combo, timeout in [
+            # only required if we need a connection reset.
+            # ('ctrl+alt+r', 12),
+            # data feed reset.
+            ('ctrl+alt+f', 6)
+        ]:
             subprocess.call([
                 'xdotool',
                 'windowactivate', '--sync', win_id,
@@ -56,12 +67,13 @@ for name in win_names:
                 'mousemove_relative', '--sync', str(w-4), str(h-4),
 
                 # NOTE: we may need to stick a `--retry 3` in here..
-            'click', '--window', win_id, '--repeat', '3', '1',
+                'click', '--window', win_id,
+                '--repeat', '3', '1',
 
                 # hackzorzes
-            'key', 'ctrl+alt+f',
+                'key', key_combo,
                 ],
-            timeout=1,
+                timeout=timeout,
             )
 
 # re-activate and focus original window