To start this is just a shell for the test, there's no checking logic
yet.. put it as `test_accounting.test_ib_account_with_duplicated_mktids()`.
The test is composed for now to be completely runtime-free using only
the offline txn-ledger / symcache / account loading APIs, ideally we
fill in the activated symbology-data-runtime cases once we figure a sane
way to handle incremental symcache updates for backends like IB..
To actually fill the test out with real checks we still need to,
- extract the problem account file from my ib.algopape into the test
harness data.
- pick some contracts with multiple fqmes despite a single bs_mktid and
ensure they're aggregated as a single `Position` as well as,
* ideally de-duplicating txns from the account file section for the
mkt..
* warning appropriately about greater-then-one fqme for the bs_mktid
and providing a way for the ledger re-writing to choose the
appropriate `<venue>` as the "primary" when the
data-symbology-runtime is up and possibly use it to incrementally
update the IB symcache and store offline for next use?
Since under `trio`-cancellation the `.remove()` is a checkpoint and will
be masked by a taskc AND we **always want to remove the rect** despite
the surrounding teardown conditions.
In the `translate_and_relay_brokerd_events()` loop task that is, such
that we never crash on a `status_msg = book._active.pop(oid)` in the
'closed' status handler whenever a double removal happens.
Turns out there were unforeseen races here when a benign backend error
would cause an order-mode dialog to be cancelled (incorrectly) and then
a UI side `.on_cancel()` would trigger too-early removal from the
`book._active` table despite the backend sending an actual 'closed'
event (much) later, this would crash on the now missing entry..
So instead we now,
- obviously use `book._active.pop(oid, None)`
- emit a `log.warning()` (not info lol) on a null-read and with a less
"one-line-y" message explaining the double removal and maybe *why*.
For backends which opt to set the new `BrokerdPosition.bs_mktid` field,
give (matching logic) priority to it such that even if the `.symbol`
field doesn't match the mkt currently focussed on chart, it will
always match on a provider's own internal asset-mapping-id. The original
fallback logic for `.fqme` matching is left as is.
As an example with IB, a qqq.nasdaq.ib txn may have been filled on
a non-primary venue as qqq.directedea.ib, in this case if the mkt is
displayed and focused on chart we want the **entire position info** to
be overlayed by the `OrderMode` UX without discrepancy.
Other refinements,
- improve logging and add a detailed edge-case-comment around the
`.on_fill()` handler to clarify where if a benign 'error' msg is
relayed from a backend it will cause the UI to operate as though the
order **was not-cleared/cancelled** since the `.on_cancel()` handler
will have likely been called just before, popping the `.dialogs`
entry. Return `bool` to indicate whether the UI removed-lines
/ added-fill-arrows.
- inverse the `return` branching logic in `.on_cancel()` to reduce
indent.
- add a very loud `log.error()` in `Status(resp='error')` case-block
ensuring the console yells about the order being cancelled, also
a todo for the weird msg-field recursion nonsense..
Such that backends can deliver their own internal unique
`MktPair.bs_mktid` when they can't seem to get it right via the
`.fqme: str` export.. (COUGH ib, you piece of sh#$).
Also add todo for possibly replacing the msg with a `Position.summary()`
"snapshot" as a better and more rigorously generated wire-ready msg.
Despite a `.bs_mktid` ideally being a bijection with `MktPair.fqme`
values, apparently some backends (cough IB) will switch the .<venue>`
part in txn records resulting in multiple account-conf-file sections for
the same dst asset. Obviously that means we can't allocate new
`Position` entries keyed by that `bs_mktid`, instead be sure to **update
them instead**!
Deats,
- add case logic to avoid pp overwrites using a `pp_objs.get()` check.
- warn on duplicated pos entries whenever the current account-file
entry's `mkt` doesn't match the pre-existing position's.
- mk `Position.add_clear()` return a `bool` indicating if the record was
newly added, warn when it was already existing/added prior.
Also,
- drop the already deprecated `open_pps()`, also from sub-pkg exports.
- draft TODO for `Position.summary()` idea as a replacement for
`BrokerdPosition`-msgs.
That is inside embedded `.accounting.calc.dyn_parse_to_dt()` closure add
an optional `_invalid: list` param to where we can report
bad-timestamped records which we instead override and return as
`from_timestamp(0.)` (when the parser loop falls through) and report
later (in summary ) from the `.accounting.calc.iter_by_dt()` caller. Add
some logging and an optional debug block for future tracing.
NOTE, this commit was re-edited during a conflict between the orig
branches: `dev/binance_api_3.1` & `dev/alt_tpts_for_perf`.
It'll break all non-linux OS-platforms atm and bc it should only be set
to a "non-std transport" through the config anyways.
Yeah yeah, we're slowly appealing to the frickin masses..
Using `tractor.trionics.collapse_eg()` as needed and doing
some renames, in similar style as elsewhere:
- `pcs` -> `rent_cs`,
- `n` -> `tn` for nursery handles,
Also,
- tweak the `._reconnect_forever()` while loop to use the
(also) `trio`-internal
`mc_state: trio._channel.MemoryChannelState = snd._state` instead
of `snd._close` to poll for open send/receive consumer task counts
since,
1. it seems more reliable then using the `snd._closed`,
2. there's no other way to access the info.. afaik?
- handle `ConnectionRejected` explicitly alongside handshake-errs as
a retry case.
- add a base-exc handler which `.exception()` reports the reconnect
attempt failure explicitly.
- drop some lingering `Optional` usage.
Namely changes for the `registry_addrs: list`, enable_transports: list`
and related `tractor._addr` primitive requirements.
Other updates include,
- passing `maybe_enable_greenback=True`,
- additional exc logging around `pikerd` syncing/booting,
- changing to newer `Context.wait_for_result()`,
- dropping (unnecessary?) `maybe_open_crash_handler()` around `pikerd` ep.
Topically, throughout various (seemingly) console-UX-affecting or benign
spots in the code base; nothing that required more intervention beyond
things superficial. A few spots also include `trio.Nursery` ref renames
(always to something with a `tn` in it) and log-level reductions to
quiet (benign) console noise oriented around issues meant to be solved
long..
Note there's still a couple spots i left with the loose-ify flag because
i haven't fully tested them without using the latest version of
`tractor.trionics.collapse_eg()`, but more then likely they should flip
over fine.
Commit this change separate from the (original) broader set applied to
the entire code base since the `.deribit.api` mod contained changes from
upstream max-pain work (from our very own @nt) which caused a noticeable
conflict and intros un-required changes from his work to re-enable
`deribit` support.
Note the original commit, "69eac7bb Spurious first-draft of EG
collapsing", applied similar changes through the rest of the code base.
AGAIN, this mod's change is only being broken out to minimize upstream
change conflicts due to updates to the `deribit` backend done earlier in
time-history.
The root daemon, pikerd, needs to be adjusted to use diff default
registry addrs to also utilize non-TCP, but for now this gets us started
testing; so far so good B)
That is to use the new `tractor.msg.types.Aid` struct to pull the
`brokerd` info from the `tractor.Channel.aid: Aid` attr as well as more
generally handling the new `Channel.raddr.proto_key: str` and no longer
assuming a TCP IPC transport; this per the recent `tractor.ipc`
subsys which adds multi-IPC-transports!
Downstream tweaks to match,
- use an "opt-in" field set to display in the `brokerd` info pane in
`.ui._feedstatus.mk_feed_label()`.
|_ also add some todos and drop some seemingly unneeded form sizing
calcs?
- tweak `.ui._label` to allow not using markdown, though ended up not
doing that since it looked too plain..
Using `tractor.trionics.collapse_eg()` as needed to avoid, at the least,
crash-worthy (in debug-mode REPL-ing terms) nested cancellation egs that
exhibit on SIGINT/ctl-c of each "app" (chart & daemon).
Also a bit of renaming of all `trio.Nursery`s to `tn`, the new "task
nursery" shorthand-var-name being used in all our other `tractor`
related projects.
Tyler Goodlet
Gud Boi