Curve-path colouring and cache mode settings are used (and can thus be
factored out of) all child types; this moves them into the parent type's
`.__init__()` and adjusts all sub-types match:
- the bulk was moved out of the `Curve.__init__()` including all
previous commentary around cache settings.
- adjust `BarItems` to use a `NoCache` mode and instead use the
`last_step_pen: pg.Pen` and `._pen` inside it's `.pain()` instead of
defining functionally duplicate vars.
- adjust all (transitive) calls to `BarItems` to use the new kwargs
names.
Allows callers to know if they should care about a particular viz
rendering call by immediately knowing if the graphics are in view. This
turns out super useful particularly when doing dynamic y-ranging overlay
calcs.
First, we rename what was `chart_maxmin()` -> `multi_maxmin()` and don't
`partial` it in to the `DisplayState`, just call it with correct `Viz`
ref inputs.
Second, as we've done with `ChartView.maybe_downsample_graphics()` use
the output from the main `Viz.update_graphics()` and feed it to the
`.maxmin()` calls for the ohlc and vlm chart but still deliver the same
output signature as prior. Also accept and use an optional profiler
input, drop `DisplayState.maxmin()` and add `.vlm_viz`.
Further perf related tweak to do with more efficient incremental
updates:
- only call `multi_maxmin()` if the main fast chart viz does a pixel
column step.
- mask out hist viz and vlm viz and all linked fsp `._set_yrange()`
calls for now until we figure out how to best optimize these updates
when considering the new group-scaled-by-% style for multicharts.
- drop `.enable_auto_yrange()` calls during startup.
Acts as short cut when pipe-lining from `Viz.update_graphics()` (which
now returns the needed in-view array-relative-read-slice as output) such
that `Viz.read()` and `.datums_range()` doesn't need to be called
internally multiple times. In this case where `i_read_range` is provided
we of course skip doing time index translations and consequently lookup
the appropriate (epoch-time) index indices for caching.
Removes the multi-maxmin usage as well as ensures appropriate `Viz` refs
are passed into the view methods now requiring it. Also drops the "back
linking" of the vlm chart view to the source OHLC chart since we're
going to add this as a default to the charting API.
The max min for a given data range is defined on the lowest level
through the `Viz` api intermingling it with the view is a layering
issue. Instead make `._set_yrange()` call the appropriate view's viz
(since they should be one-to-one) directly and thus avoid any callback
monkey patching nonsense.
Requires that we now make `._set_yrange()` require either one of an
explicit `yrange: tuple[float, float]` min/max pair or the `Viz` ref (so
that maxmin can be called) as input. Adjust
`enable/disable_auto_yrange()` to bind in a new `._yranger()` partial
that's (solely) needed for signal reg/unreg which binds in the now
required input `Viz` to these methods.
Comment the `autoscale_overlays` block in `.maybe_downsample_graphics()`
for now until we figure out the most sane way to auto-range all linked
overlays and subplots (with their own overlays).
In an effort to ensure uniform and uppx-optimized last datum graphics
updates call this method directly instead of the equivalent graphics
object thus ensuring we only update the last pixel column according with
the appropriate max/min computed from the last uppx's worth of data.
Fixes / improvements to enable `.draw_last()` usage include,
- change `Viz._render_table` -> `._alt_r: tuple[Renderer, pg.GraphicsItem] | None`
which holds an alternative (usually downsampled) render and graphics
obj.
- extend the `.draw_last()` signature to include:
- `last_read` to allow passing in the already read data from
`.update_graphics()`, if it isn't passed then a manual read is done
internally.
- `reset_cache: bool` which is passed through to the graphics obj.
- use the new `Formatter.flat_index_ratio: float` when indexing into xy
1d data to compute the max/min for that px column.
Other,
- drop `bars_range` input from `maxmin()` since it's unused.
For the purposes of avoiding another full format call we can stash the
last rendered 1d xy pre-graphics formats as
`IncrementalFormatter.x/y_1d: np.ndarray`s and allow readers in the viz
and render machinery to use this data easily for things like "only
drawing the last uppx's worth of data as a line". Also add
a `.flat_index_ratio: float` which can be used similarly as a scalar
applied to indexes into the src array but instead when indexing
(flattened) 1d xy formatted outputs. Finally, this drops the way
overdone/noisy `.__repr__()` meth we had XD
When a new tick comes in but no new time step / bar is yet needed (to be
appended) we can simply adjust **only** the last bar datum
lines-graphic(s) to avoid a redraw of the preceding `QPainterPath` on
every tick. Do this by calling `Viz.draw_last()` on the fast and slow
chart and adjusting the guards around calls to `Viz.update_graphics()`
(which *does* update paths) to only enter when there's a `do_px_step`
condition. We can stop calling `main_viz.plot.vb._set_yrange()` on view
treading cases since the range should have already been adjusted by the
clearing-tick processing mxmn updates.
Further this changes,
- the `chart_maxmin()` helper (which we should eventually just get rid
of) to take bound in `Viz`s for the ohlc and vlm chart instead of the
chart widget handles.
- extend the guard around hist viz yranging to only enter when not in
"axis mode" - the same as for the fast viz.
Since we removed the `Viz.update_graphics()` call from the main rt loop
we have to be sure to call it in the history chart incr-loop to avoid
a gap between the last bar and prior history since startup. We only
need to update on tread since that should be the only time a full redraw
is ever necessary, ow only the last datum is needed.
Further this moves the graphics cycle func's profiler init to the top in
an effort to get more correct latency measures.
Since `ChartPlotWidget.update_graphics_from_flow()` is more or less just
a call to `Viz.update_graphics()` try to call that directly where
possible.
Changes include:
- calling the viz in the display state specific `maxmin()`.
- passing a viz instance to each `ChartView._set_yrange()` call (in prep
of explicit group auto-ranging); not that this input is unused in the
method for now.
- drop `bars_range` var passing since we don't use it.
Inside `._interaction` routines we need access to `Viz` instances.
Instead of doing `CharPlotWidget._vizs: dict` lookups this ensures each
plot can lookup it's (parent) viz without error.
Also, adjusts `Viz.maxmin()` output parsing to new signature.
Move the `Viz.datums_range()` call into `Viz.maxmin()` itself thus
minimizing the chart `.maxmin()` method to an ultra light wrapper around
the viz call. Also move all profiling into the `Viz` method.
Adjust `Viz.maxmin()` to return both the (rounded) x-range values which
correspond to the range containing the y-domain min and max so that
it can be used for up and coming overlay group maxmin calcs.
We obviously don't want to be debugging a sample-index issue if/when the
market for the asset is closed (since we'll be guaranteed to have
a mismatch, lul). Pass in the `feed_is_live: trio.Event` throughout the
backfilling routines to allow first checking for the live feed being active
so as to avoid breakpointing on false +ves. Also, add a detailed warning
log message for when *actually* investigating a mismatch.
This should never really happen but when it does it appears to be a race
with writing startup pre-graphics-formatter array data where we get
`x_end` epoch value subtracting some really small offset value (like
`-/+0.5`) or the opposite where the `x_start` is epoch and `x_end` is
small.
This adds a warning msg and `breakpoint()` as well as guards around the
entire code downsampling code path so that when resumed the downsampling
cycle should just be skipped and avoid a crash.
This attempt was unsuccessful since trying to (re)select the last
highlighted item on both an "enter" or "click" of that item causes
a hang and then segfault in `Qt`; no clue why..
Adds a `keep_current_item_selected: bool` flag to
`CompleterView.show_cache_entries()` but using it seems to always cause
a hang and crash; we keep all potential use spots commented for now
obviously to avoid this. Also included is a bunch of tidying to logic
blocks in the kb-control loop for readability.
goodboy
Guillermo Rodriguez
Guillermo Rodriguez
Tyler Goodlet