Got borked by the logic re-factoring to get more conc going around
tsdb vs. latest frame loads with nested nurseries. So, repair all that
such that we can still backfill symbols previously not loaded as well as
drop all the `_FeedBus` instance passing to subtasks where it's
definitely not needed.
Toss in a pause point around sampler stream `'backfilling'` msgs as well
since there's seems to be a weird ctx-cancelled propagation going on
when a feed client disconnects during backfill and this might be where
the src `tractor.ContextCancelled` is getting bubbled from?
Obvi took a little `.ui` component fixing (as per prior commits) but
this is now a working PoC for gap detection and markup from a remote
(data) non-`chart` actor!
Iface and impl deats from `.ui._remote_ctl`:
- add new `open_annot_ctl()` mngr which attaches to all locally
discoverable chart actors, gathers annot-ctl streams per fqme set, and
delivers a new `AnnotCtl` client which allows adding annotation
rectangles via a `.add_rect()` method.
- also template out some other soon-to-get methods for removing and
modifying pre-exiting annotations on some `ChartView` 💥
- ensure the `chart` CLI subcmd starts the (`qtloops`) guest-mode init
with the `.ui._remote_ctl` module enabled.
- actually use this stuff in the `piker store ldshm` CLI to submit
markup rects around any detected null/time gaps in the tsdb data!
Still lots to do:
- probably colorization of gaps depending on if they're venue
closures (aka real mkt gaps) vs. "missing data" from the backend (aka
timeseries consistency gaps).
- run gap detection and markup as part of the std `.tsp` sub-sys
runtime such that gap annots are a std "built-in" feature of
charting.
- support for epoch time stamp AND abs-shm-index rect x-values
(depending on chart operational state).
As mentioned in a prior commit this was the (seemingly, and so far) only
way to make our `.select_box` annotator shift-click rect work properly
(and the same as) by adopting the code around `ViewBox.rbScaleBox`
(which we now also disable). That means also passing the scene coords to
the `SelectRect.set_scen_pos()`. Also add in the proper `ev:
pyqtgraph.GraphicsScene.mouseEvents.MouseDragEvent` so we can actually
figure out wut the hell all this pg custom mouse-event stuff is XD
Turns out using the `.setRect()` method was the main cause of the issue
(though still don't really understand how or why) and this instead
adopts verbatim the code from `pg.ViewBox.updateScaleBox()` which uses
a scaling transform to set the rect for the "zoom scale box" thingy.
Further add a shite ton more improvements and interface tweaks in
support of the new remote-annotation control msging subsys:
- re-impl `.set_scen_pos()` to expect `QGraphicsScene` coordinates (i.e.
passed from the interaction loop and pass scene `QPointF`s from
`ViewBox.mouseDragEvent()` using the `MouseDragEvent.scenePos()` and
friends; this is required to properly use the transform setting
approach to resize the select-rect as mentioned above.
- add `as_point()` converter to maybe-cast python `tuple[float, float]`
inputs (prolly from IPC msgs) to equivalent `QPointF`s.
- add a ton more detailed Qt-obj-related typing throughout our deriv.
- call `.add_to_view()` from init so that wtv view is passed in during
instantiation is always set as the `.vb` after creation.
- factor the (proxy widget) label creation into a new `.init_label()`
so that both the `set_scen/view_pos()` methods can call it and just
generally decouple rect-pos mods from label content mods.
Since we can and want to eventually allow remote control of pretty much
all UIs, this drafts out a new `.ui._remote_ctl` module with a new
`@tractor.context` called `remote_annotate()` which simply starts a msg
loop which allows for (eventual) initial control of a `SelectRect`
through IPC msgs.
Remote controller impl deats:
- make `._display.graphics_update_loop()` set a `._remote_ctl._dss:
dict` for all chart actor-global `DisplayState` instances which can
then be controlled from the `remote_annotate()` handler task.
- also stash any remote client controller `tractor.Context` handles in
a module var for broadband IPC cancellation on any display loop
shutdown.
- draft a further global map to track graphics object instances since
likely we'll want to support remote mutation where the client can use
the `id(obj): int` key as an IPC handle/uuid.
- just draft out a client-side `@acm` for now: `open_annots_client()` to
be filled out in up coming commits.
UI component tweaks in support of the above:
- change/add `SelectRect.set_view_pos()` and `.set_scene_pos()` to allow
specifying the rect coords in either of the scene or viewbox domains.
- use these new apis in the interaction loop.
- add a `SelectRect.add_to_view()` to avoid having annotation client
code knowing "how" a graphics obj needs to be added and can instead
just pass only the target `ChartView` during init.
- drop all the status label updates from the display loop since they
don't really work all the time, and probably it's not a feature we
want to keep in the longer term (over just console output and/or using
the status bar for simpler "current state / mkt" infos).
- allows a bit of simplification of `.ui._fsp` method APIs to not pass
around status (bar) callbacks as well!
Can't ref `dt_eps` and `tsdb_entry` if they don't exist.. like for 1s
sampling from `binance` (which dne). So make sure to add better logic
guard and only open the finaly backload nursery if we actually need to
fill the gap between latest history and where tsdb history ends.
TO CHERRY #486
Also toss in a poll loop around the `hist_shm: ShmArray` backfill
read-check in the `.data.allocate_persisten_feed()` init to cope with
possible racy-ness from the increased tsdb history loading concurrency
now implemented.
Move `.data.history` -> `.tsp.__init__.py` for now as main pkg-mod
and `.data.tsp` -> `.tsp._anal` (for analysis).
Obviously follow commits will change surrounding codebase (imports) to
match..
Previously we were actually failing silently too fast instead of
actually trying multiple times (now we do for 100) before finally
raising any timeout in the final loop `else:` block.
Thinking about just moving all of that module (after a content breakup)
to a new `.piker.tsp` which will mostly depend on the `.data` and
`.storage` sub-pkgs; the idea is to move biz-logic for tsdb IO/mgmt and
orchestration with real-time (shm) buffers and the graphics layer into
a common spot for both manual analysis/research work and better
separation of low level data structure primitives from their higher
level usage.
Add a better `data.history` mod doc string in prep for this move
as well as clean out a bunch of legacy commented cruft from the
`trimeter` and `marketstore` days.
TO CHERRY #486 (if we can)
For each timeframe open a sub-nursery to do the backfilling + tsdb load
+ null-segment scanning in an effort to both speed up load time (though
we need to reverse the current order to really make it faster rn since
moving to the much faster parquet file backend) and do concurrent
time-gap/null-segment checking of tsdb history while mrf (most recent
frame) history is backfilling.
The details are more or less just `trio` related task-func composition
tricks and a reordering of said funcs for optimal startup latency.
Also commented the `back_load_from_tsdb()` task for now since it's
unused.
Apparently it returns the index of the prior zero-row (prolly since we
do the backward difference) so ensure `fi_zgaps += 1`..
Also fix remaining edge case handling when there's only 2 zero-segs
which was borked after a refactor to the special case blocks (like
a single zero row) prior to the `absi_zsegs` building loop AND make sure
to always return abs indices OUTSIDE the zero seg, i.e. the indices of
the non-zero row just before and just after so that the history
backfiller can use non-zero timestamps to generate range datetimes for
backend frame queries.
Add much more detailed doc-comments with a small ascii diagram to
explain how all these somewhat subtle vec ops work. Also toss in some
sanity checks on the output indices to ensure they don't point to
zero (time) valued rows when used to read the frame.
Call it `iter_null_segs()` (for now?) and use in the final (sequential)
stage of the `.history.start_backfill()` task-func. Delivers abs,
frame-relative, and equiv time stamps on each iteration pertaining to
each detected null-segment to make it easy to do piece-wise history
queries for each.
Further,
- handle edge case in `get_null_segs()` where there is only 1 zeroed
row value, in which case we deliver `absi_zsegs` as a single pair of
the same index value and,
- when this occurs `iter_null_seqs()` delivers `None` for all the
`start_` related indices/timestamps since all `get_hist()` routines
(delivered by `open_history_client()`) should handle it as being a
"get max history from this end_dt" type query.
- add note about needing to do time gap handling where there's a gap in
the timeseries-history that isn't actually IN the data-history.
Using a bunch of fancy `numpy` vec ops (and ideally eventually extending
the same to `polars`) this is a first draft of `get_null_segs()`
a `col: str` field-value-is-zero detector which filters to all zero-valued
input frame segments and returns the corresponding useful slice-indexes:
- gap absolute (in shm buffer terms) index-endpoints as
`absi_zsegs` for slicing to each null-segment in the src frame.
- ALL abs indices of rows with zeroed `col` values as `absi_zeros`.
- the full set of the input frame's row-entries (view) which are
null valued for the chosen `col` as `zero_t`.
Use this new null-segment-detector in the
`.data.history.start_backfill()` task to attempt to fill null gaps that
might be extant from some prior backfill attempt. Since
`get_null_segs()` should now deliver a sequence of slices for each gap
we don't really need to have the `while gap_indices:` loop any more, so
just move that to the end-of-func and warn log (for now) if all gaps
aren't eventually filled.
TODO:
-[ ] do the null-seg detection and filling concurrently from
most-recent-frame backfilling.
-[ ] offer the same detection in `.storage.cli` cmds for manual tsp
anal.
-[ ] make the graphics layer actually update correctly when null-segs
are filled (currently still broken somehow in the `Viz` caching
layer?)
CHERRY INTO #486
In an effort to catch out-of-order and/or partial-frame-duplicated
segments, add some `.tsp` calls throughout the backloader tasks
including a call to the new `.sort_diff()` to catch the out-of-order
history cases.
Since the `diff: int` serves as a predicate anyway (when `0` nothing
duplicate was detected) might as well just return it directly since it's
likely also useful for the caller when doing deeper anal.
Also, handle the zero-diff case by just returning early with a copy of
the input frame and a `diff=0`.
CHERRY INTO #486
Turns out this was the main source of all sorts of gaps and overlaps
in history frame backfilling. The original idea was that when a gap
causes not enough (1m) bars to be delivered (like over a weekend or
holiday) when we just implicitly do another frame query to try and at
least fill out the default duration (normally 1-2 days). Doing the
recursion sloppily was causing all sorts of stupid problems..
It's kinda obvious now what was wrong in hindsight:
- always pass the sampling period (timeframe) when recursing
- adjust the logic to not be mutex with the no-data case (since it
already is mutex..)
- pack to the `numpy` array BEFORE the recursive call to ensure the
`end_dt: DateTime` is selected and passed correctly!
Toss in some other helpfuls:
- more explicit `pendulum` typing imports
- some masked out sorted-diffing checks (that can be enabled when
debugging out-of-order frame issues)
- always error log about less-than time step mismatches since we should never
have time-diff steps **smaller** then specified in the
`sample_period_s`!
Yet again these are (going to be) generally useful in the data proc
layer as well as going forward with (possibly) moving the history and
shm rt-processing layer to apache (arrow or other) shared-ds
equivalents.
Includes a rename of `.data._timeseries` -> `.data.tsp` for "time series
processing", making it a public sub-mod; it contains a highly useful set
of data-frame and `numpy.ndarray` ops routines in various subsystems Bo
I guess since i started supporting the whole "allow a gap between
the latest tsdb sample and the latest retrieved history frame" the
overlap slicing has been completely borked XD where we've been sticking
in duplicate history samples and this has caused all sorts of down
stream time-series processing issues..
So fix that but ensuring whenever there IS an overlap between history in
the latest frame and the tsdb that we always prefer the latest frame's
data and slice OUT the tsdb's duplicate indices..
CHERRY TO #486
Think i finally figured out the weird issue without out-of-order OHLC
history getting jammed in the wrong place:
- gap is detected in parquet/offline ts (likely due to a zero dt or
other gap),
- query for history in the gap is made BUT that frame is then inserted
in the shm buffer **at the end** (likely using array int-entry
indexing) which inserts it at the wrong location,
- later this out-of-order frame is written to the storage layer
(parquet) and then is repeated on further reboots with the original
gap causing further queries for the same frame on every history
backfill.
A set of tools useful for detecting these issues and annotating them
nicely on chart part of this patch's intent:
- `dedupe()` will detect any dt gaps, deduplicate datetime rows and
return the de-duplicated df along with gaps table.
- use this in both `piker store anal` such that we potentially
resolve and backfill the gaps correctly if some rows were removed.
- possibly also use this to detect the backfilling error in logic at
the time of backfilling the frame instead of after the fact (which
would require re-writing the shm array from something like `store
ldshm` and would be a manual post-hoc solution, not a fix to the
original issue..
Been meaning to this for a while, and there's still a few design
/ interface kinks (like `.mkt: MktPair` which should be better
generalized?) but this flips over all of the fsp chaining engine
to operate on the higher level `Flume` APIs via the newly cobbled
`Cascade` thinger..
Allows opening with `.from_msg(readonly=False)` for write permissions
making underlyig shm arrays readonly. Also, make sure to pop the
`ShmArray` field entries prior to msg-ization, not sure how that worked
with the `Feed.flumes` equivalent..but?
Tyler Goodlet