Gah, was a remaining bug where if you tried to update the pps state with
both new trades and from the ledger you'd do a double add of
transactions that were cleared during a `update_pps()` loop. Instead now
keep all clears in tact until ready to serialize to the `pps.toml` file
in which cases we call a new method `Position.minimize_clears()` which
does the work of only keep clears since the last net-zero size.
Re-implement `update_pps_conf()` update logic as a single pass loop
which does expiry and size checking for closed pps all in one pass thus
allowing us to drop `dump_active()` which was kinda redundant anyway..
Before we weren't emitting pp msgs when a position went back to "net
zero" (aka the size is zero) nor when a new one was opened (wasn't
previously loaded from the `pps.toml`). This reworks a bunch of the
incremental update logic as well as ports to the changes in the
`piker.pp` module:
- rename a few of the normalizing helpers to be more explicit.
- drop calling `pp.get_pps()` in the trades dialog task and instead
create msgs iteratively, per account, by iterating through collected
position and API trade records and calling instead
`pp.update_pps_conf()`.
- always from-ledger-update both positions reported from ib's pp sys and
session api trades detected on ems-trade-dialog startup.
- `update_ledger_from_api_trades()` now does **just** that: only updates
the trades ledger and returns the transaction set.
- `update_and_audit_msgs()` now only the input list of msgs and properly
generates new msgs for newly created positions that weren't previously
loaded from the `pps.toml`.
- use `tomli` package for reading since it's the fastest pure python
reader available apparently.
- add new fields to each pp's clears table: price, size, dt
- make `load_pps_from_toml()`'s `reload_records` a dict that can be
passed in by the caller and is verbatim used to re-read a ledger and
filter to the specified symbol set to build out fresh pp objects.
- add a `update_from_ledger: bool` flag to `load_pps_from_toml()`
to allow forcing a full backend ledger read.
- if a set of trades records is passed into `update_pps_conf()` parse
out the meta data required to cause a ledger reload as per 2 bullets
above.
- return active and closed pps in separate by-account maps from
`update_pps_conf()`.
- drop the `key_by` kwarg.
This makes it possible to refresh a single fqsn-position in one's
`pps.toml` by simply deleting the file entry, in which case, if there is
new trade records passed to `load_pps_from_toml()` via the new
`reload_records` kwarg, then the backend ledger entries matching that
symbol will be filtered and used to recompute a fresh position.
This turns out to be super handy when you have crashes that prevent
a `pps.toml` entry from being updated correctly but where the ledger
does have all the data necessary to calculate a fresh correct entry.
Since some positions obviously expire and thus shouldn't continually
exist inside a `pps.toml` add naive support for tracking and discarding
expired contracts:
- add `Transaction.expiry: Optional[pendulum.datetime]`.
- add `Position.expiry: Optional[pendulum.datetime]` which can be parsed
from a transaction ledger.
- only write pps with a non-none expiry to the `pps.toml`
- change `Position.avg_price` -> `.be_price` (be is "breakeven")
since it's a much less ambiguous name.
- change `load_pps_from_legder()` to *not* call `dump_active()` since
for the only use case it ends up getting called later anyway.
We can probably make this better (and with less file sys accesses) later
such that we keep a consistent pps state in mem and only write async
maybe from another side-task?
What a nightmare this was.. main holdup was that cost (commissions)
reports are fired independent from "fills" so you can't really emit
a proper full position update until they both arrive.
Deatz:
- move `push_tradesies()` and relay loop in `deliver_trade_events()` to
the new py3.10 `match:` syntax B)
- subscribe for, and handle `CommissionReport` events from `ib_insync`
and repack as a `cost` event type.
- handle cons with no primary/listing exchange (like futes) in
`update_ledger_from_api_trades()` by falling back to the plain
'exchange' field.
- drop reverse fqsn lookup from ib positions map; just use contract
lookup for api trade logs since we're already connected..
- make validation in `update_and_audit()` optional via flag.
- pass in the accounts def, ib pp msg table and the proxies table to the
trade event relay task-loop.
- add `emit_pp_update()` too encapsulate a full api trade entry
incremental update which calls into the `piker.pp` apis to,
- update the ledger
- update the pps.toml
- generate a new `BrokerdPosition` msg to send to the ems
- adjust trades relay loop to only emit pp updates when a cost report
arrives for the fill/execution by maintaining a small table per exec
id.
I don't want to rant too much any more since it's pretty clear `ib` has
either zero concern for its (api) user's or a severely terrible data
management team and/or general inter-team coordination system, but this
patch more or less hacks the flex report records to be similar enough to
API "execution" / "fill" records such that they can be similarly
normalized and stored as well as processed for position calculations..
Dirty deats,
- use the `IB.fills()` method for pulling current session trade events
since it's both recommended in the docs and does seem to capture
more extensive meta-data.
- add a `update_ledger_from_api()` helper which does all the insane work
of making sure api trade entries are usable both within piker's global
fqsn system but also compatible with incremental updates of positions
computed from trade ledgers derived from ib's "flex reports".
- add "auditting" of `ib`'s reported positioning API messages by
comparison with piker's new "traders first" breakeven price style and
complain via logging on mismatches.
- handle buy vs. sell arithmetic (via a +ve or -ve multiplier) to make
"size" arithmetic work for API trade entries..
- draft out options contract transaction parsing but skip in pps
generation for now.
- always use the "execution id" as ledger keys both in flex and api
trade processing.
- for whatever weird reason `ib_insync` doesn't include the so called
"primary exchange" in contracts reported in fill events, so do manual
contract lookups in such cases such that pps entries can be placed
in the right fqsn section...
Still ToDo:
- incremental update on trade clears / position updates
- pps audit from ledger depending on user config?
This makes a few major changes but mostly is centered around including
transaction (aka trade-clear) costs in the avg breakeven price
calculation.
TL;DR:
- rename `TradeRecord` -> `Transaction`.
- make `Position.fills` a `dict[str, float]` which holds each clear's
cost value.
- change `Transaction.symkey` -> `.bsuid` for "backend symbol unique id".
- drop `brokername: str` arg to `update_pps()`
- rename `._split_active()` -> `dump_active()` and use input keys
verbatim in output map.
- in `update_pps_conf()` always incrementally update from trade records
even when no `pps.toml` exists yet since it may be both the case that
the ledger needs loading **and** the caller is handing new records not
yet in the ledger.
Begins the position tracking incremental update API which supports both
constructing a `pps.toml` both from trade ledgers as well diff-oriented
incremental update from an existing config assumed to be previously
generated from some prior ledger.
New set of routines includes:
- `_split_active()` a helper to split a position table into the active
and closed positions (aka pps of size 0) for determining entry updates
in the `pps.toml`.
- `update_pps_conf()` to maybe load a `pps.toml` and update it from
an input trades ledger including necessary (de)serialization to and
from `Position` object form(s).
- `load_pps_from_ledger()` a ledger parser-loader which constructs
a table of pps strictly from the broker-account ledger data without
any consideration for any existing pps file.
Each "entry" in `pps.toml` also contains a `fills: list` attr (name may
change) which references the set of trade records which make up its
state since the last net-zero position in the instrument.
Add a `TradeRecord` struct which holds the minimal field set to build
out position entries. Add `.update_pps()` to convert a set of records
into LIFO position entries, optionally allowing for an update to some
existing pp input set. Add `load_pps_from_ledger()` which does a full
ledger extraction to pp objects, ready for writing a `pps.toml`.
Since "flex reports" are only available for the current session's trades
the day after, this adds support for also collecting trade execution
records for the current session and writing them to the equivalent
ledger file.
Summary:
- add `trades_to_records()` to handle parsing both flex and API event
objects into a common record form.
- add `norm_trade_records()` to handle converting ledger entries into
`TradeRecord` types from the new `piker.pps` mod (coming in next
commit).
Start a generic "position related" util mod and bring in the `Position`
type from the allocator , convert it to a `msgspec.Struct` and add
a `.lifo_update()` method. Implement a WIP pp parser from a trades
ledger and use the new lifo method to gather position entries.
Tyler Goodlet