Apparently it will likely fix our `trio`-cancel-scopes-corrupted crash
when we try to let our `._web_bs.NoBsWs` do reconnect logic around
the asyn-generator implemented data-feed streaming routines in `binance`
and `kraken`. See the project docs for deatz; obvs we add the lib as
a dep.
Solve this by always scaling the y-range for the major/target curve
*before* the final overlay scaling loop; this implicitly always solve
the case where the major series is the only one in view.
Tidy up debug print formatting and add some loop-end demarcation comment
lines.
This is particularly more "good looking" when we boot with a pair that
doesn't have historical 1s OHLC and thus the fast chart is empty from
outset. In this case it's a lot nicer to be already zoomed to
a comfortable preset number of "datums in view" even when the history
isn't yet filled in.
Adjusts the chart display `Viz.default_view()` startup to explicitly
ensure this happens via the `do_min_bars=True` flag B)
Not sure how i missed this (and left in handling of `list.remove()` and
it ever worked for that?) after the `samplerd` impl in 5ec1a72 but, this
adjusts the remove-broken-subscriber loop to catch the correct
`set.remove()` exception type on a missing (likely already removed)
subscription entry.
For the purposes of eventually trying to resolve last-step indexing
synchronization (an intermittent but still existing) issue(s) that can
happen due to races during history frame query and shm writing during
startup. In fact, here we drop all `hist_viz` info queries from the main
display loop for now anticipating that this code will either be removed
or improved later.
Again, as per the signature change, never expect implicit time step
calcs from overlay processing/machinery code. Also, extend the debug
printing (yet again) to include better details around
"rescale-due-to-minor-range-out-of-view" cases and a detailed msg for
the transform/scaling calculation (inputs/outputs), particularly for the
cases when one of the curves has a lesser support.
As per the change to `slice_from_time()` this ensures this `Viz` always
passes its self-calculated time indexing step size to the time slicing
routine(s).
Further this contains a slight impl tweak to `.scalars_from_index()` to
slice the actual view range from `xref` to `Viz.ViewState.xrange[1]` and
then reading the corresponding `yref` from the first entry in that
array; this should be no slower in theory and makes way for further
caching of x-read-range to `ViewState` opportunities later.
There's been way too many issues when trying to calculate this
dynamically from the input array, so just expect the caller to know what
it's doing and don't bother with ever hitting the error case of
calculating and incorrect value internally.
When the target pinning curve (by default, the dispersion major) is
shorter then the pinned curve, we need to make sure we find still find
the x-intersect for computing returns scalars! Use `Viz.i_from_t()` to
accomplish this as well and, augment that method with a `return_y: bool`
to allow the caller to also retrieve the equivalent y-value at the
requested input time `t: float` for convenience.
Also tweak a few more internals around the 'loglin_ref_to_curve'
method:
- only solve / adjust for the above case when the major's xref is
detected as being "earlier" in time the current minor's.
- pop the major viz entry from the overlay table ahead of time to avoid
a needless iteration and simplify the transform calc phase loop to
avoid handling that needless cycle B)
- add much better "organized" debug printing with more clear headers
around which "phase"/loop the message pertains and well as more
explicit details in terms of x and y-range values on each cycle of
each loop.
Previously when very zoomed out and using the `'r'` hotkey the
interaction handler loop wouldn't trigger a re-(up)sampling to get
a more detailed curve graphic and instead the previous downsampled
(under-detailed) graphic would show. Fix that by ensuring we yield back
to the Qt event loop and do at least a couple render cycles with paired
`.interact_graphics_cycle()` calls.
Further this flips the `.start/signal_ic()` methods to use the new
`.reset_graphics_caches()` ctr-mngr method.
Instead delegate directly to `Viz.default_view()` throughout charting
startup and interaction handlers.
Also add a `ChartPlotWidget.reset_graphics_caches()` context mngr which
resets all managed graphics object's cacheing modes on enter and
restores them on exit for simplified use in interaction handling code.
This finally seems to mitigate all the "smearing" and "jitter" artifacts
when using Qt's "coordinate cache" graphics-mode:
- whenever we're in a mouse interaction (as per calls to
`ChartView.start/signal_ic()`) we simply disable the caching mode (set
`.NoCache` until the interaction is complete.
- only do this (for now) during a pan since it doesn't seem to be an
issue when zooming?
- ensure disabling all `Viz.graphics` and `.ds_graphics` to be agnostic
to any case where there's both a zoom and a pan simultaneously (not
that it's easy to do manually XD) as well as solving the problem
whenever an OHLC series is in traced-and-downsampled mode (during low
zoom).
Impl deatz:
- rename `ChartView._ic` -> `._in_interact: trio.Event`
- add `.ChartView._interact_stack: ExitStack` which we use to open.
and close the `FlowGraphics.reset_cache()` mngrs from mouse handlers.
- drop all the commented per-subtype overrides for `.cache_mode: int`.
- write up much better doc strings for `FlattenedOHLC` and `StepCurve`
including some very basic ASCII-art diagrams.
When the minor has the same scaling as the major in a given direction we
should still do back-scaling against the major-target and previous
minors to avoid strange edge cases where only the target-major might not
be shifted correctly to show an matched intersect point? More or less
this just meant making the y-mxmn checks interval-inclusive with
`>=`/`<=` operators.
Also adds a shite ton of detailed comments throughout the pin-to-target
method blocks and moves the final major y-range call outside the final
`scaled: dict` loop.
For the "pin to target major/target curve" overlay method, this finally
solves the longstanding issue of ensuring that any new minor curve,
which requires and increase in the major/target curve y-range, also
re-scales all previously scaled minor curves retroactively. Thus we now
guarantee that all minor curves are correctly "pinned" to their
target/major on their earliest available datum **and** are all kept in
view.
Yah yah, i know it's the same as before (the N > 2 curves case with
out-of-range-minor rescaling the previously scaled curves isn't fixed
yet...) but, this is a much better and optional implementation in less
code. Further we're now better leveraging various new cached properties
and methods on `Viz`.
We now handle different `overlay_technique: str` options using `match:`
syntax in the 2ndary scaling loop, stash the returns scalars per curve
in `overlay_table`, and store and iterate the curves by dispersion
measure sort order.
Further wrt "pin-to-target-curve" mode, which currently still pins to
the largest measured dispersion curve in the overlay set:
- pop major Ci overlay table entries at start for sub-calcs usage when
handling the "minor requires major rescale after pin" case.
- (finally) correctly rescale the major curve y-mxmn to whatever the
latest minor overlay curve by calcing the inverse transform from the
minor *at that point*:
- the intersect point being that which the minor has starts support on
the major's x-domain* using the new `Viz.scalars_from_index()` and,
- checking that the minor is not out of range (versus what the major's
transform calcs it to be, in which case,
- calc the inverse transform from the current out-of-range minor and
use it to project the new y-mxmn for the major/target based on the
same intersect-reference point in the x-domain used by the minor.
- always handle the target-major Ci specially by only setting the
`mx_ymn` / `mx_ymn` value when iterating that entry in the overlay
table.
- add todos around also doing the last sub-sub bullet for all previously
major-transform scaled minor overlays (this is coming next..i hope).
- add a final 3rd overlay loop which goes through a final `scaled: dict`
to apply all range values to each view; this is where we will
eventually solve that last edge case of an out-of-range minor's
scaling needing to be used to rescale already scaled minors XD
jaredgoldman
Tyler Goodlet
goodboy