Commit Graph

4083 Commits (basic_buy_bot)

Author SHA1 Message Date
Tyler Goodlet cdec4782f0 Add commented append slice-len sanity check 2023-02-12 13:55:26 -05:00
Tyler Goodlet f30a48b82c Use `np.diff()` on last 16 samples instead of only last datum pair 2023-02-12 13:55:26 -05:00
Tyler Goodlet 98de22a740 Enable the experimental `QPrivatePath` functionality from latest `pyqtgraph` 2023-02-12 13:55:26 -05:00
Tyler Goodlet efbb8e86d4 Fix overlayed slow chart "treading"
Turns out we were updating the wrong ``Viz``/``DisplayState`` inside the
closure style `increment_history_view()`` (probably due to looping
through the flumes and dynamically closing in that task-func).. Instead
define the history incrementer at module level and pass in the
`DisplayState` explicitly. Further rework the `DisplayState` attrs to be
more focused around the `Viz` associated with the fast and slow chart
and be sure to adjust output from each `Viz.incr_info()` call to latest
update. Oh, and just tweaked the line palette for the moment.

FYI "treading" here is referring to  the x-shifting of the curve when
the last datum is in view such that on new sampled appends the "last"
datum is kept in the same x-location in UI terms.
2023-02-12 13:55:26 -05:00
Tyler Goodlet b6521498f4 Make `.increment_view()` take in a `datums: int` and always scale it by sample step size 2023-02-12 13:55:26 -05:00
Tyler Goodlet 06f1b94147 Make `Viz.incr_info()` do treading with time-index, and appending with array-index 2023-02-12 13:55:26 -05:00
Tyler Goodlet ffb57f0256 Rename `reset` -> `reset_cache` 2023-02-12 13:55:26 -05:00
Tyler Goodlet ed1f64cf43 Fix gap detection on RHS; always bin-search on overshot time range 2023-02-12 13:55:26 -05:00
Tyler Goodlet bf8ea33697 Add type annots to vars inside `Render.render()` 2023-02-12 13:55:26 -05:00
Tyler Goodlet bc17308de7 Drop coordinate cacheing from `BarItems`, causes weird jitter on pan 2023-02-12 13:55:26 -05:00
Tyler Goodlet 1ece704d6e Add `ChartPlotWidget.main_viz: Viz` convenience `@property` 2023-02-12 13:55:26 -05:00
Tyler Goodlet dea1c1c2d6 Make `Viz.incr_info()` sample rate agnostic
Mainly it was the global (should we )increment logic that needs to be
independent for the fast vs. slow chart such that the slow isn't
update-shifted by the fast and vice versa. We do this using a new
`'i_last_slow'` key in the `DisplayState.globalz: dict` which is
singleton for each sample-rate-specific chart and works for both time
and array indexing.

Also, we drop some old commented `graphics.draw_last_datum()` code that
never ended up being needed again inside the coordinate cache reset
bloc.
2023-02-12 13:55:26 -05:00
Tyler Goodlet 3300a240c6 Use array-`int`-indexing on single feed
Might as well since it makes the chart look less gappy and we can easily
flip the index switch now B)

Also adds a new `'i_slow_last'` key to `DisplayState` for a singleton
across all slow charts and thus no more need for special case logic in
`viz.incr_info()`.
2023-02-12 13:55:26 -05:00
Tyler Goodlet 50ef4efccb Align step curves the same as OHLC bars 2023-02-12 13:55:26 -05:00
Tyler Goodlet 51f2461e8b Add `IncrementalFormatter.x_offset: np.ndarray`
Define the x-domain coords "offset" (determining the curve graphics
per-datum placement) for each formatter such that there's only on place
to change it when needed. Obviously each graphics type has it's own
dimensionality and this is reflected by the array shapes on each
subtype.
2023-02-12 13:55:26 -05:00
Tyler Goodlet 444768d30f Adjust OHLC bar x-offsets to be time span matched
Previously we were drawing with the middle of the bar on each index with
arms to either side: +/- some arm length. Instead this changes so that
each bar is drawn *after* each index/timestamp such that in graphics
coords the bar span more correctly matches the time span in the
x-domain. This makes the linked region between slow and fast chart
directly match (without any transform) for epoch-time indexing such that
the last x-coord in view on the fast chart is no more then the
next time step in (downsampled) slow view.

Deats:
- adjust in `._pathops.path_arrays_from_ohlc()` and take an `bar_w` bar
  width input (normally taken from the data step size).
- change `.ui._ohlc.bar_from_ohlc_row()` and
  `BarItems.draw_last_datum()` to match.
2023-02-12 13:55:26 -05:00
Tyler Goodlet 0d0675ac7e `Viz._index_field` a `typing.Literal[str]` 2023-02-12 13:55:26 -05:00
Tyler Goodlet 24b384f3ef Set `path_arrays_from_ohlc(use_time_index=True)` on epoch indexing
Allows easily switching between normal array `int` indexing and time
indexing by just flipping the `Viz._index_field: str`.

Also, guard all the x-data audit breakpoints with a time indexing
condition.
2023-02-12 13:55:26 -05:00
Tyler Goodlet 93330954c2 Ugh, use `bool` flag to determine index field.. 2023-02-12 13:55:26 -05:00
Tyler Goodlet edf721f755 Make `LinearRegion` link using epoch-time index
Turned out to be super simple to get the first draft to work since the
fast and slow chart now use the same domain, however, it seems like
maybe there's an offset issue still where the fast may be a couple
minutes ahead of the slow?

Need to dig in a bit..
2023-02-12 13:55:26 -05:00
Tyler Goodlet 530b2731ba Add global `i_step` per overlay to `DisplayState`
Using a global "last index step" (via module var) obviously has problems
when working with multiple feed sets in a single global app instance:
any separate feed-set will be incremented according to an app-global
index-step and thus won't correctly calc per-feed-set-step update info.

Impl deatz:
- drop `DisplayState.incr_info()` (since previously moved to `Viz`) and
  call that method on each appropriate `Viz` instance where necessary;
  further ensure the appropriate `DisplayState` instance is passed in to
  each call and make sure to pass a `state: DisplayState`.
- add `DisplayState.hist_vars: dict` for history chart (sets) to
  determine the per-feed (not set) current slow chart (time) step.
- add `DisplayState.globalz: dict` to house a common per-feed-set state
  and use it inside the new `Viz.incr_info()` such that
  a `should_increment: bool` can be returned and used by the display
  loop to determine whether to x-shift the current chart.
2023-02-12 13:55:24 -05:00
Tyler Goodlet 14104185d2 Move `DisplayState.incr_info()` -> `Viz` 2023-02-12 13:41:18 -05:00
Tyler Goodlet 3019c35e30 Move `Viz` layer to new `.ui` mod 2023-02-12 13:41:18 -05:00
Tyler Goodlet 4d74bc29b4 Fix line -> bars on 6x UPPX
Read the `Viz.index_step()` directly to avoid always reading 1 on the
slow chart; this was completely broken before and resulting in not
rendering the bars graphic on the slow chart until at a true uppx of
1 which obviously doesn't work for 60 width bars XD

Further cleanups to `._render` module:
- drop `array` output from `Renderer.render()`, `read_from_key` input
  and fix type annot.
- drop `should_line`, `changed_to_line` and `render_kwargs` from
  `render_baritems()` outputs and instead calc `should_redraw` logic
  inside the func body and return as output.
2023-02-12 13:41:18 -05:00
Tyler Goodlet 3638ae8d3e Drop unused `read_src_from_key: bool` to `.format_to_1d()` 2023-02-12 13:41:18 -05:00
Tyler Goodlet c5dd67e63c Right, do index lookup for int-index as well.. 2023-02-12 13:41:18 -05:00
Tyler Goodlet 0663880a6d Fix formatter xy ndarray first prepend case
First allocation vs. first "prepend" of source data to an xy `ndarray`
format **must be mutex** in order to avoid a double prepend.

Previously when both blocks were executed we'd end up with
a `.xy_nd_start` that was decremented (at least) twice as much as it
should be on the first `.format_to_1d()` call which is obviously
incorrect (and causes problems for m4 downsampling as discussed below).
Further, since the underlying `ShmArray` buffer indexing is managed
(i.e. write-updated) completely independently from the incremental
formatter updates and internal xy indexing, we can't use
`ShmArray._first.value` and instead need to use the particular `.diff()`
output's prepend length value to decrement the `.xy_nd_start` on updates
after initial alloc.

Problems this resolves with m4:
- m4 uses a x-domain diff to calculate the number of "frames" to
  downsample to, this is normally based on the ratio of pixel columns on
  screen vs. the size of the input xy data.
- previously using an int-index (not epoch time) the max diff between
  first and last index would be the size of the input buffer and thus
  would never cause a large mem allocation issue (though it may have
  been inefficient in terms of needed size).
- with an epoch time index this max diff could explode if you had some
  near-now epoch time stamp **minus** an x-allocation value: generally
  some value in `[0.5, -0.5]` which would result in a massive frames and
  thus internal `np.ndarray()` allocation causing either a crash in
  `numba` code or actual system mem over allocation.

Further, put in some more x value checks that trigger breakpoints if we
detect values that caused this issue - we'll remove em after this has
been tested enough.
2023-02-12 13:41:18 -05:00
Tyler Goodlet 3bed142d15 Handle time-indexing for fill arrows
Call into a reworked `Flume.get_index()` for both the slow and fast
chart and do time index clipping to last datum where necessary.
2023-02-12 13:41:18 -05:00
Tyler Goodlet 9fcc6f9c44 Restore coord-cache resetting
Turns out we can't seem to avoid the artefacts when click-drag-scrolling
(results in weird repeated "smeared" curve segments) so just go back to
the original code.
2023-02-12 13:41:18 -05:00
Tyler Goodlet 7aef31701b Add some commented debug prints for default fmtr 2023-02-12 13:41:18 -05:00
Tyler Goodlet 135627e142 Slicec to an extra index around each timestamp input 2023-02-12 13:41:18 -05:00
Tyler Goodlet 5216a6b732 Drop passing `render_data` to `Curve.draw_last_datum()` 2023-02-12 13:41:18 -05:00
Tyler Goodlet 2a797d32dc Add back `.default_view()` slice logic for `int` indexing 2023-02-12 13:41:18 -05:00
Tyler Goodlet 35a16ded2d Block out `do_print` stuff inside `Viz.maxmin()` 2023-02-12 13:41:18 -05:00
Tyler Goodlet 44f50e3d0e Implement `stop_t` gap adjustments; the good lord said it is the problem 2023-02-12 13:41:18 -05:00
Tyler Goodlet 96b871c4d7 Draw last datums on boot
Ensures that a "last datum" graphics object exists so that zooming can
read it using `.x_last()`. Also, disable the linked region stuff for now
since it's totally borked after flipping to the time indexing.
2023-02-12 13:41:18 -05:00
Tyler Goodlet d2aad74dfc Delegate to `Viz.default_view()` on chart
Also add a rage print to not forget about the global index
tracking/diffing in the display loop we still need to change.
2023-02-12 13:41:18 -05:00
Tyler Goodlet 50209752c3 Re-implement `.default_view()` on `Viz`
Since we don't really need it defined on the "chart widget" move it to
a viz method and rework it to hell:

- always discard the invalid view l > r case.
- use the graphic's UPPX to determine UI-to-scene coordinate scaling for
  the L1-label collision detection, if there is no L1 just offset by
  a few (index step scaled) datums; this allows us to drop the 2x
  x-range calls as was hacked previous.
- handle no-data-in-view cases explicitly and error if we get any
  ostensibly impossible cases.
- expect caller to trigger a graphics cycle if needed.

Further support this includes a rework a slew of other important
details:

- add `Viz.index_step`, an idempotent computed, index (presumably uniform)
  step value which is needed for variable sample rate graphics displayed
  on an epoch (second) time index.
- rework `Viz.datums_range()` to pass view x-endpoints as first and last
  elements in return `tuple`; tighten up snap-to-data edge case logic
  using `max()`/`min()` calls and better internal var naming.
- adjust all calls to `slice_from_time()` to not expect an "abs" slice.
- drop all `.yrange` resetting since we can just have the `Renderer` do
  it when necessary.
2023-02-12 13:41:18 -05:00
Tyler Goodlet 5ab4e5493e Add gap detection for `stop_t`, though only report atm 2023-02-12 13:41:18 -05:00
Tyler Goodlet e252f70253 Add `.x_last()` meth to flow graphics 2023-02-12 13:41:18 -05:00
Tyler Goodlet 98438e29ef Drop `Flume.view_data()` 2023-02-12 13:41:18 -05:00
Tyler Goodlet d649a7d1fa Drop old breakpoint 2023-02-12 13:41:18 -05:00
Tyler Goodlet 2669ced629 Drop `_slice_from_time()` 2023-02-12 13:41:18 -05:00
Tyler Goodlet f2c0987a04 Use uniform step arithmetic in `slice_from_time()`
If we presume that time indexing using a uniform step we can calculate
the exact index (using `//`) for the input time presuming the data
set has zero gaps. This gives a massive speedup over `numpy` fancy
indexing and (naive) `numba` iteration. Further in the case where time
gaps are detected, we can use `numpy.searchsorted()` to binary search
for the nearest expected index at lower latency.

Deatz,
- comment-disable the call to the naive `numba` scan impl.
- add a optional `step: int` input (calced if not provided).
- add todos for caching binary search results in the gap detection
  cases.
- drop returning the "absolute buffer indexing" slice since the caller
  can always just use the read-relative slice to acquire it.
2023-02-12 13:41:18 -05:00
Tyler Goodlet bb84715bf0 Make `.default_view()` time step aware
When we use an epoch index and any sample rate > 1s we need to scale the
"number of bars" to that step in order to place the view correctly in
x-domain terms. For now we're calcing the step in-method but likely,
longer run, we'll pull this from elsewhere (like a ``Viz`` attr).
2023-02-12 13:41:17 -05:00
Tyler Goodlet 0bdb7261d1 Flip over to epoch-time based x-domain indexing 2023-02-12 13:41:17 -05:00
Tyler Goodlet 12857a258b Adjust all `slice_from_time()` calls to not expect mask 2023-02-12 13:41:17 -05:00
Tyler Goodlet 46808fbb89 Rewrite `slice_from_time()` using `numba`
Gives approx a 3-4x speedup using plain old iterate-with-for-loop style
though still not really happy with this .5 to 1 ms latency..

Move the core `@njit` part to a `_slice_from_time()` with a pure python
func with orig name around it. Also, drop the output `mask` array since
we can generally just use the slices in the caller to accomplish the
same input array slicing, duh..
2023-02-12 13:41:17 -05:00
Tyler Goodlet 6ca8334253 Use index (time) step to calc OHLC bar/line uppx threshold 2023-02-12 13:41:17 -05:00
Tyler Goodlet a3844f9922 Use step size to determine bar gaps 2023-02-12 13:41:17 -05:00