ib: update ibc.ini from latest upstream template

dockering/ib/ibc.ini

@@ -117,9 +117,57 @@ SecondFactorDevice=
 
 # If you use the IBKR Mobile app for second factor authentication,
 # and you fail to complete the process before the time limit imposed
-# by IBKR, you can use this setting to tell IBC to exit: arrangements
+# by IBKR, this setting tells IBC whether to automatically restart
-# can then be made to automatically restart IBC in order to initiate
+# the login sequence, giving you another opportunity to complete
-# the login sequence afresh. Otherwise, manual intervention at TWS's
+# second factor authentication. 
+#
+# Permitted values are 'yes' and 'no'.
+#
+# If this setting is not present or has no value, then the value
+# of the deprecated ExitAfterSecondFactorAuthenticationTimeout is
+# used instead. If this also has no value, then this setting defaults
+# to 'no'.
+#
+# NB: you must be using IBC v3.14.0 or later to use this setting:
+# earlier versions ignore it.
+
+ReloginAfterSecondFactorAuthenticationTimeout=
+
+
+# This setting is only relevant if
+# ReloginAfterSecondFactorAuthenticationTimeout is set to 'yes',
+# or if ExitAfterSecondFactorAuthenticationTimeout is set to 'yes'.
+#
+# It controls how long (in seconds) IBC waits for login to complete
+# after the user acknowledges the second factor authentication
+# alert at the IBKR Mobile app. If login has not completed after
+# this time, IBC terminates.
+# The default value is 60.
+
+SecondFactorAuthenticationExitInterval=
+
+
+# This setting specifies the timeout for second factor authentication
+# imposed by IB. The value is in seconds. You should not change this
+# setting unless you have reason to believe that IB has changed the
+# timeout. The default value is 180.
+
+SecondFactorAuthenticationTimeout=180
+
+
+# DEPRECATED SETTING
+# ------------------
+#
+# ExitAfterSecondFactorAuthenticationTimeout - THIS SETTING WILL BE
+# REMOVED IN A FUTURE RELEASE. For IBC version 3.14.0 and later, see
+# the notes for ReloginAfterSecondFactorAuthenticationTimeout above.
+#
+# For IBC versions earlier than 3.14.0: If you use the IBKR Mobile
+# app for second factor authentication, and you fail to complete the
+# process before the time limit imposed by IBKR, you can use this
+# setting to tell IBC to exit: arrangements can then be made to
+# automatically restart IBC in order to initiate the login sequence
+# afresh. Otherwise, manual intervention at TWS's
 # Second Factor Authentication dialog is needed to complete the
 # login.
 #
@@ -132,29 +180,18 @@ SecondFactorDevice=
 ExitAfterSecondFactorAuthenticationTimeout=no
 
 
-# This setting is only relevant if
-# ExitAfterSecondFactorAuthenticationTimeout is set to 'yes'.
-#
-# It controls how long (in seconds) IBC waits for login to complete
-# after the user acknowledges the second factor authentication
-# alert at the IBKR Mobile app. If login has not completed after
-# this time, IBC terminates.
-# The default value is 40.
-
-SecondFactorAuthenticationExitInterval=
-
-
 # Trading Mode
 # ------------
 #
-# TWS 955 introduced a new Trading Mode combo box on its login
+# This indicates whether the live account or the paper trading
-# dialog. This indicates whether the live account or the paper
+# account corresponding to the supplied credentials is to be used.
-# trading account corresponding to the supplied credentials is
+# The allowed values are 'live' (the default) and 'paper'.
-# to be used. The allowed values are 'live' (the default) and
+#
-# 'paper'. For earlier versions of TWS this setting has no
+# If this is set to 'live', then the credentials for the live
-# effect.
+# account must be supplied. If it is set to 'paper', then either
+# the live or the paper-trading credentials may be supplied.
 
-TradingMode=
+TradingMode=paper
 
 
 # Paper-trading Account Warning
@@ -188,7 +225,7 @@ AcceptNonBrokerageAccountWarning=yes
 #
 # The default value is 60.
 
-LoginDialogDisplayTimeout=20
+LoginDialogDisplayTimeout=60
 
 
 
@@ -217,7 +254,15 @@ LoginDialogDisplayTimeout=20
 # but they are acceptable.
 #
 # The default is the current working directory when IBC is
-# started.
+# started, unless the TWS_SETTINGS_PATH setting in the relevant
+# start script is set.
+#
+# If both this setting and TWS_SETTINGS_PATH are set, then this
+# setting takes priority. Note that if they have different values,
+# auto-restart will not work.
+#
+# NB: this setting is now DEPRECATED. You should use the
+# TWS_SETTINGS_PATH setting in the relevant start script.
 
 IbDir=/root/Jts
 
@@ -286,13 +331,30 @@ ExistingSessionDetectedAction=primary
 #
 # If OverrideTwsApiPort is set to an integer, IBC changes the 
 # 'Socket port' in TWS's API configuration to that number shortly 
-# after startup. Leaving the setting blank will make no change to
+# after startup (but note that for the FIX Gateway, this setting is
+# actually stored in jts.ini rather than the Gateway's settings
+# file). Leaving the setting blank will make no change to 
 # the current setting. This setting is only intended for use in 
 # certain specialized situations where the port number needs to 
+# be set dynamically at run-time, and for the FIX Gateway: most
+# non-FIX users will never need it, so don't use it unless you know
+# you need it.
+
+OverrideTwsApiPort=4000
+
+
+# Override TWS Master Client ID
+# -----------------------------
+#
+# If OverrideTwsMasterClientID is set to an integer, IBC changes the
+# 'Master Client ID' value in TWS's API configuration to that 
+# value shortly after startup. Leaving the setting blank will make
+# no change to the current setting. This setting is only intended 
+# for use in certain specialized situations where the value needs to
 # be set dynamically at run-time: most users will never need it,
 # so don't use it unless you know you need it.
 
-; OverrideTwsApiPort=4002
+OverrideTwsMasterClientID=
 
 
 # Read-only Login
@@ -302,11 +364,13 @@ ExistingSessionDetectedAction=primary
 # account security programme, the user will not be asked to perform
 # the second factor authentication action, and login to TWS will
 # occur automatically in read-only mode: in this mode, placing or
-# managing orders is not allowed. If set to 'no', and the user is
+# managing orders is not allowed. 
-# enrolled in IB's account security programme, the user must perform
+#
-# the relevant second factor authentication action to complete the
+# If set to 'no', and the user is enrolled in IB's account security
-# login. 
+# programme, the second factor authentication process is handled
-
+# according to the Second Factor Authentication Settings described
+# elsewhere in this file.
+#
 # If the user is not enrolled in IB's account security programme,
 # this setting is ignored. The default is 'no'.
 
@@ -326,7 +390,44 @@ ReadOnlyLogin=no
 # set the relevant checkbox (this only needs to be done once) and
 # not provide a value for this setting.
 
-ReadOnlyApi=no
+ReadOnlyApi=
+
+
+# API Precautions
+# ---------------
+# 
+# These settings relate to the corresponding 'Precautions' checkboxes in the
+# API section of the Global Configuration dialog.
+#
+# For all of these, the accepted values are:
+# - 'yes' sets the checkbox
+# - 'no' clears the checkbox
+# - if not set, the existing TWS/Gateway configuration is unchanged
+#
+# NB: thess settings are really only supplied for the benefit of new TWS
+# or Gateway instances that are being automatically installed and
+# started without user intervention, or where user settings are not preserved
+# between sessions (eg some Docker containers). Where a user is involved, they
+# should use the Global Configuration to set the relevant checkboxes and not
+# provide values for these settings.
+
+BypassOrderPrecautions=
+
+BypassBondWarning=
+
+BypassNegativeYieldToWorstConfirmation=
+
+BypassCalledBondWarning=
+
+BypassSameActionPairTradeWarning=
+
+BypassPriceBasedVolatilityRiskWarning=
+
+BypassUSStocksMarketDataInSharesWarning=
+
+BypassRedirectOrderWarning=
+
+BypassNoOverfillProtectionPrecaution=
 
 
 # Market data size for US stocks - lots or shares
@@ -381,54 +482,145 @@ AcceptBidAskLastSizeDisplayUpdateNotification=accept
 SendMarketDataInLotsForUSstocks=
 
 
+# Trusted API Client IPs
+# ----------------------
+#
+# NB: THIS SETTING IS ONLY RELEVANT FOR THE GATEWAY, AND ONLY WHEN FIX=yes.
+# In all other cases it is ignored.
+#
+# This is a list of IP addresses separated by commas. API clients with IP
+# addresses in this list are able to connect to the API without Gateway
+# generating the 'Incoming connection' popup.
+#
+# Note that 127.0.0.1 is always permitted to connect, so do not include it
+# in this setting.
+
+TrustedTwsApiClientIPs=
+
+
+# Reset Order ID Sequence
+# -----------------------
+#
+# The setting resets the order id sequence for orders submitted via the API, so
+# that the next invocation of the `NextValidId` API callback will return the
+# value 1. The reset occurs when TWS starts.
+#
+# Note that order ids are reset for all API clients, except those that have
+# outstanding (ie incomplete) orders: their order id sequence carries on as
+# before.
+#
+# Valid values are 'yes', 'true', 'false' and 'no'. The default is 'no'.
+
+ResetOrderIdsAtStart=
+
+
+# This setting specifies IBC's action when TWS displays the dialog asking for
+# confirmation of a request to reset the API order id sequence.
+#
+# Note that the Gateway never displays this dialog, so this setting is ignored
+# for a Gateway session.
+#
+# Valid values consist of two strings separated by a solidus '/'. The first
+# value specifies the action to take when the order id reset request resulted
+# from setting ResetOrderIdsAtStart=yes. The second specifies the action to
+# take when the order id reset request is a result of the user clicking the
+# 'Reset API order ID sequence' button in the API configuration. Each value
+# must be one of the following:
+#
+#    'confirm' 
+#        order ids will be reset
+#
+#    'reject' 
+#        order ids will not be reset
+#
+#    'ignore' 
+#        IBC will ignore the dialog. The user must take action.
+#
+#    The default setting is ignore/ignore
+
+# Examples:
+#
+#    'confirm/reject' - confirm order id reset only if ResetOrderIdsAtStart=yes
+#                       and reject any user-initiated requests
+#
+#    'ignore/confirm' - user must decide what to do if ResetOrderIdsAtStart=yes
+#                       and confirm user-initiated requests
+#
+#    'reject/ignore'  - reject order id reset if  ResetOrderIdsAtStart=yes but
+#                       allow user to handle user-initiated requests 
+
+ConfirmOrderIdReset=
+
+
 
 # =============================================================================
-# 4.   TWS Auto-Closedown
+# 4.   TWS Auto-Logoff and Auto-Restart
 # =============================================================================
 #
-# IMPORTANT NOTE: Starting with TWS 974, this setting no longer
+# TWS and Gateway insist on being restarted every day. Two alternative
-# works properly, because IB have changed the way TWS handles its
+# automatic options are offered: 
-# autologoff mechanism. 
 #
-# You should now configure the TWS autologoff time to something
+#    - Auto-Logoff: at a specified time, TWS shuts down tidily, without
-# convenient for you, and restart IBC each day.
+#      restarting.
 #
-# Alternatively, discontinue use of IBC and use the auto-relogin
+#    - Auto-Restart: at a specified time, TWS shuts down and then restarts
-# mechanism within TWS 974 and later versions (note that the 
+#      without the user having to re-autheticate.
-# auto-relogin mechanism provided by IB is not available if you
+#
-# use IBC).
+# The normal way to configure the time at which this happens is via the Lock
+# and Exit section of the Configuration dialog. Once this time has been
+# configured in this way, the setting persists until the user changes it again.
+#
+# However, there are situations where there is no user available to do this
+# configuration, or where there is no persistent storage (for example some
+# Docker images). In such cases, the auto-restart or auto-logoff time can be
+# set whenever IBC starts with the settings below.
+#
+# The value, if specified, must be a time in HH:MM AM/PM format, for example
+# 08:00 AM or 10:00 PM. Note that there must be a single space between the
+# two parts of this value; also that midnight is "12:00 AM" and midday is
+# "12:00 PM".
+#
+# If no value is specified for either setting, the currently configured
+# settings will apply. If a value is supplied for one setting, the other
+# setting is cleared. If values are supplied for both settings, only the
+# auto-restart time is set, and the auto-logoff time is cleared.
+#
+# Note that for a normal TWS/Gateway installation with persistent storage
+# (for example on a desktop computer) the value will be persisted as if the
+# user had set it via the configuration dialog.
+#
+# If you choose to auto-restart, you should take note of the considerations
+# described at the link below. Note that where this information mentions
+# 'manual authentication', restarting IBC will do the job (IBKR does not
+# recognise the existence of IBC in its docuemntation).
+#
+#  https://www.interactivebrokers.com/en/software/tws/twsguide.htm#usersguidebook/configuretws/auto_restart_info.htm
+#
+# If you use the "RESTART" command via the IBC command server, and IBC is
+# running any version of the Gateway (or a version of TWS earlier than 1018),
+# note that this will set the Auto-Restart time in Gateway/TWS's configuration
+# dialog to the time at which the restart actually happens (which may be up to
+# a minute after the RESTART command is issued). To prevent future auto-
+# restarts at this time, you must make sure you have set AutoLogoffTime or
+# AutoRestartTime to your desired value before running IBC. NB: this does not
+# apply to TWS from version 1018 onwards.
 
-# Set to yes or no (lower case).
+AutoLogoffTime=
-#
-#   yes   means allow TWS to shut down automatically at its
-# 	  specified shutdown time, which is set via the TWS
-#	  configuration menu.
-#
-#   no    means TWS never shuts down automatically.
-#
-# NB: IB recommends that you do not keep TWS running
-# continuously. If you set this setting to 'no', you may
-# experience incorrect TWS operation.
-#
-# NB: the default for this setting is 'no'. Since this will
-# only work properly with TWS versions earlier than 974, you
-# should explicitly set this to 'yes' for version 974 and later.
-
-IbAutoClosedown=yes
 
+AutoRestartTime=
 
 
 # =============================================================================
 # 5.   TWS Tidy Closedown Time
 # =============================================================================
 #
-# NB: starting with TWS 974 this is no longer a useful option
+# Specifies a time at which TWS will close down tidily, with no restart.
-# because both TWS and Gateway now have the same auto-logoff
-# mechanism, and IBC can no longer avoid this.
 #
-# Note that giving this setting a value does not change TWS's
+# There is little reason to use this setting. It is similar to AutoLogoffTime,
-# auto-logoff in any way: any setting will be additional to the
+# but can include a day-of-the-week, whereas AutoLogoffTime and AutoRestartTime
-# TWS auto-logoff.
+# apply every day. So for example you could use ClosedownAt in conjunction with
+# AutoRestartTime to shut down TWS on Friday evenings after the markets
+# close, without it running on Saturday as well.
 #
 # To tell IBC to tidily close TWS at a specified time every
 # day, set this value to <hh:mm>, for example:
@@ -487,7 +679,7 @@ AcceptIncomingConnectionAction=reject
 #   no    means the dialog remains on display and must be
 #         handled by the user.
 
-AllowBlindTrading=yes
+AllowBlindTrading=no
 
 
 # Save Settings on a Schedule
@@ -530,6 +722,26 @@ AllowBlindTrading=yes
 SaveTwsSettingsAt=
 
 
+# Confirm Crypto Currency Orders Automatically
+# --------------------------------------------
+#
+# When you place an order for a cryptocurrency contract, a dialog is displayed
+# asking you to confirm that you want to place the order, and notifying you
+# that you are placing an order to trade cryptocurrency with Paxos, a New York
+# limited trust company, and not at Interactive Brokers.
+#
+#   transmit    means that the order will be placed automatically, and the
+#               dialog will then be closed
+#
+#   cancel      means that the order will not be placed, and the dialog will
+#               then be closed
+#
+#   manual      means that IBC will take no action and the user must deal
+#               with the dialog
+
+ConfirmCryptoCurrencyOrders=transmit
+
+
 
 # =============================================================================
 # 7.   Settings Specific to Indian Versions of TWS
@@ -566,13 +778,17 @@ DismissNSEComplianceNotice=yes
 #
 # The port number that IBC listens on for commands
 # such as "STOP". DO NOT set this to the port number
-# used for TWS API connections. There is no good reason
+# used for TWS API connections.
-# to change this setting unless the port is used by
+#
-# some other application (typically another instance of
+# The convention is to use 7462 for this port,
-# IBC). The default value is 0, which tells IBC not to
+# but it must be set to a different value from any other
-# start the command server
+# IBC instance that might run at the same time.
+#
+# The default value is 0, which tells IBC not to start
+# the command server
 
 #CommandServerPort=7462
+CommandServerPort=0
 
 
 # Permitted Command Sources
@@ -583,19 +799,19 @@ DismissNSEComplianceNotice=yes
 # IBC.  Commands can always be sent from the
 # same host as IBC is running on.
 
-ControlFrom=127.0.0.1
+ControlFrom=
 
 
 # Address for Receiving Commands
 # ------------------------------
 #
 # Specifies the IP address on which the Command Server
-# is so listen. For a multi-homed host, this can be used
+# is to listen. For a multi-homed host, this can be used
 # to specify that connection requests are only to be
 # accepted on the specified address. The default is to
 # accept connection requests on all local addresses.
 
-BindAddress=127.0.0.1
+BindAddress=
 
 
 # Command Prompt
@@ -621,7 +837,7 @@ CommandPrompt=
 # information is sent. The default is that such information
 # is not sent.
 
-SuppressInfoMessages=no
+SuppressInfoMessages=yes
 
 
 
@@ -651,10 +867,10 @@ SuppressInfoMessages=no
 # The LogStructureScope setting indicates which windows are
 # eligible for structure logging:
 #
-#    - if set to 'known', only windows that IBC recognizes
+#    - (default value) if set to 'known', only windows that
-#      are eligible - these are windows that IBC has some
+#      IBC recognizes are eligible - these are windows that
-#      interest in monitoring, usually to take some action
+#      IBC has some interest in monitoring, usually to take
-#      on the user's behalf;
+#      some action on the user's behalf;
 #
 #    - if set to 'unknown', only windows that IBC does not
 #      recognize are eligible. Most windows displayed by
@@ -667,9 +883,8 @@ SuppressInfoMessages=no
 #    - if set to 'all', then every window displayed by TWS
 #      is eligible.
 #
-# The default value is 'known'.
 
-LogStructureScope=all
+LogStructureScope=known
 
 
 # When to Log Window Structure
@@ -682,13 +897,15 @@ LogStructureScope=all
 #       structure of an eligible window the first time it
 #       is encountered;
 #
+#     - if set to 'openclose', the structure is logged every
+#       time an eligible window is opened or closed;
+#
 #    - if set to 'activate', the structure is logged every
 #      time an eligible window is made active;
 #
-#    - if set to 'never' or 'no' or 'false', structure
+#    - (default value) if set to 'never' or 'no' or 'false',
-#      information is never logged.
+#      structure information is never logged.
 #
-# The default value is 'never'.
 
 LogStructureWhen=never
 
@@ -708,4 +925,3 @@ LogStructureWhen=never
 #LogComponents=
 
 
-