pikers
/
piker
4
1
Fork 0
Code Issues 20 Pull Requests 13 Packages Projects Releases Wiki Activity
piker/config/conf.toml

36 lines
970 B
TOML
Raw Permalink Normal View History

Start draft `conf.toml` "root" config with tsdb contact info
2023-05-17 14:58:12 +00:00
[network]
Fix endpoint config and daemon startup from PR94 review Keep the shipped `conf.toml` defaults TCP-only for this `tractor` pin, with an explicit single-transport note and commented UDS alternatives. Preserve repeated Click `--maddrs` options and treat a direct string as one endpoint. Deats, - Validate daemon bind requests against actual listeners, not registrar discovery endpoints; normalize tagged addresses and allow OS-assigned TCP ports. Explain registrar ownership and automatic client binding at the validation site. - Resolve explicit or inherited registrar addresses independently of other daemon kwargs, consuming overrides before forwarding them and keeping discovery and startup on the same registrar. - Default chart binding to `None` for absent or empty network config, and remove the unconditional Binance debugger pause. - Defer the prematurely cherry-picked `test_datad_spawn` until its service API lands. Add offline endpoint/startup regressions and a real distinct-registrar/daemon lifecycle check. Include the human-directed config and registrar/bind explanations and the direct prompt provenance pair from the review fix pass. Prompt-IO: ai/prompt-io/20261007T165453Z_bde2457b_prompt_io.md (this patch was generated in some part by `opencode` using `gpt-6.1-sol` (`openai`))
2026-10-10 18:20:52 +00:00
# This Tractor pin supports one transport per actor, not mixed TCP/UDS.
# Use the single TCP endpoint shown in each list for this version.
# Mixed-transport configs need a future Tractor pin with that support.
Wow, update root `conf.toml` to new multiaddr style I don't know how this wasn't already committed but.. drops the legacy `marketstore` tsdb socket info vars since we're going all in on `nativedb` BP
2025-10-03 00:07:23 +00:00
pikerd = [
Add `tpt_bind_addrs` and separate registry eps Thread a `tpt_bind_addrs` param through `open_piker_runtime()` and `open_pikerd()` so pikerd's bind addrs can differ from the registry endpoint (support a dedicated `regd` service). Simplify `load_trans_eps()` to delegate entirely to `tractor.discovery.parse_endpoints()`. Deats, - `conf.toml`: fix maddr prefixes to proper `/ip4/` and `/unix/`, add `chart` endpoints section, add commented `regd` example. - `cli/__init__.py`: replace `parse_maddr` with `parse_endpoints`, rename `--maddr` -> `--maddrs`, parse `regd` key from eps falling back to `pikerd` addrs. - `_actor_runtime.py`: thread `tpt_bind_addrs` through runtime open fns to `open_root_actor`. - `ui/cli.py`: activate `network` config parsing for chart CLI, extract `chart` eps for bind and `regd`/`pikerd` for registry, pass `tpt_bind_addrs` through runtime config. (this commit msg was generated in some part by [`claude-code`][claude-code-gh]) [claude-code-gh]: https://github.com/anthropics/claude-code
2026-04-14 16:20:57 +00:00
# TCP localhost loopback
'/ip4/127.0.0.1/tcp/6116',
Use `tractor.Address` for endpoint resolution Replace manual `layers['ipv4']['addr']` / `layers['tcp']['port']` tuple extraction with direct `tractor.Address` objects returned from `load_trans_eps()`. In `open_pikerd()` call `addr.unwrap()` for the raw-tuple comparison against `root_actor.accept_addrs`. Deats, - `conf.toml`: update maddr prefix `/ipv4/` -> `/ipv/`, add commented UDS socket path example. - `cli/__init__.py`: wrap endpoint loading in `maybe_open_crash_handler`, append `addr` objects directly to `regaddrs`. - `ui/cli.py`: restructure `chart()` body into `maybe_open_crash_handler` scope, switch to `registry_addrs` from config, comment out the `network`-based `load_trans_eps` path (WIP `multiaddr` transition). - `_actor_runtime.py`: use `addr.unwrap()` for accept-addr membership check. - `uv.lock`: add `multiaddr >= 0.2.0` and its transitive deps. (this commit msg was generated in some part by [`claude-code`][claude-code-gh]) [claude-code-gh]: https://github.com/anthropics/claude-code
2026-04-13 17:40:40 +00:00
Fix endpoint config and daemon startup from PR94 review Keep the shipped `conf.toml` defaults TCP-only for this `tractor` pin, with an explicit single-transport note and commented UDS alternatives. Preserve repeated Click `--maddrs` options and treat a direct string as one endpoint. Deats, - Validate daemon bind requests against actual listeners, not registrar discovery endpoints; normalize tagged addresses and allow OS-assigned TCP ports. Explain registrar ownership and automatic client binding at the validation site. - Resolve explicit or inherited registrar addresses independently of other daemon kwargs, consuming overrides before forwarding them and keeping discovery and startup on the same registrar. - Default chart binding to `None` for absent or empty network config, and remove the unconditional Binance debugger pause. - Defer the prematurely cherry-picked `test_datad_spawn` until its service API lands. Add offline endpoint/startup regressions and a real distinct-registrar/daemon lifecycle check. Include the human-directed config and registrar/bind explanations and the direct prompt provenance pair from the review fix pass. Prompt-IO: ai/prompt-io/20261007T165453Z_bde2457b_prompt_io.md (this patch was generated in some part by `opencode` using `gpt-6.1-sol` (`openai`))
2026-10-10 18:20:52 +00:00
# UDS alternative: replace TCP and select the UDS transport.
# '/unix/run/user/1000/piker/pikerd.sock',
Wow, update root `conf.toml` to new multiaddr style I don't know how this wasn't already committed but.. drops the legacy `marketstore` tsdb socket info vars since we're going all in on `nativedb` BP
2025-10-03 00:07:23 +00:00
]
Add `tpt_bind_addrs` and separate registry eps Thread a `tpt_bind_addrs` param through `open_piker_runtime()` and `open_pikerd()` so pikerd's bind addrs can differ from the registry endpoint (support a dedicated `regd` service). Simplify `load_trans_eps()` to delegate entirely to `tractor.discovery.parse_endpoints()`. Deats, - `conf.toml`: fix maddr prefixes to proper `/ip4/` and `/unix/`, add `chart` endpoints section, add commented `regd` example. - `cli/__init__.py`: replace `parse_maddr` with `parse_endpoints`, rename `--maddr` -> `--maddrs`, parse `regd` key from eps falling back to `pikerd` addrs. - `_actor_runtime.py`: thread `tpt_bind_addrs` through runtime open fns to `open_root_actor`. - `ui/cli.py`: activate `network` config parsing for chart CLI, extract `chart` eps for bind and `regd`/`pikerd` for registry, pass `tpt_bind_addrs` through runtime config. (this commit msg was generated in some part by [`claude-code`][claude-code-gh]) [claude-code-gh]: https://github.com/anthropics/claude-code
2026-04-14 16:20:57 +00:00
chart = [
'/ip4/127.0.0.1/tcp/3003',
Fix endpoint config and daemon startup from PR94 review Keep the shipped `conf.toml` defaults TCP-only for this `tractor` pin, with an explicit single-transport note and commented UDS alternatives. Preserve repeated Click `--maddrs` options and treat a direct string as one endpoint. Deats, - Validate daemon bind requests against actual listeners, not registrar discovery endpoints; normalize tagged addresses and allow OS-assigned TCP ports. Explain registrar ownership and automatic client binding at the validation site. - Resolve explicit or inherited registrar addresses independently of other daemon kwargs, consuming overrides before forwarding them and keeping discovery and startup on the same registrar. - Default chart binding to `None` for absent or empty network config, and remove the unconditional Binance debugger pause. - Defer the prematurely cherry-picked `test_datad_spawn` until its service API lands. Add offline endpoint/startup regressions and a real distinct-registrar/daemon lifecycle check. Include the human-directed config and registrar/bind explanations and the direct prompt provenance pair from the review fix pass. Prompt-IO: ai/prompt-io/20261007T165453Z_bde2457b_prompt_io.md (this patch was generated in some part by `opencode` using `gpt-6.1-sol` (`openai`))
2026-10-10 18:20:52 +00:00
# '/unix/run/user/1000/piker/chart.sock',
Add `tpt_bind_addrs` and separate registry eps Thread a `tpt_bind_addrs` param through `open_piker_runtime()` and `open_pikerd()` so pikerd's bind addrs can differ from the registry endpoint (support a dedicated `regd` service). Simplify `load_trans_eps()` to delegate entirely to `tractor.discovery.parse_endpoints()`. Deats, - `conf.toml`: fix maddr prefixes to proper `/ip4/` and `/unix/`, add `chart` endpoints section, add commented `regd` example. - `cli/__init__.py`: replace `parse_maddr` with `parse_endpoints`, rename `--maddr` -> `--maddrs`, parse `regd` key from eps falling back to `pikerd` addrs. - `_actor_runtime.py`: thread `tpt_bind_addrs` through runtime open fns to `open_root_actor`. - `ui/cli.py`: activate `network` config parsing for chart CLI, extract `chart` eps for bind and `regd`/`pikerd` for registry, pass `tpt_bind_addrs` through runtime config. (this commit msg was generated in some part by [`claude-code`][claude-code-gh]) [claude-code-gh]: https://github.com/anthropics/claude-code
2026-04-14 16:20:57 +00:00
]
# the service-actor registry endpoint;
# other pikerd trees contact this to discover
# actors.
# XXX if absent, pikerd binds the registry
# on its own tpt_bind_addrs.
# regd = ['/ip4/127.0.0.1/tcp/6116']
# chart = [
# '/ip4/127.0.0.1/tcp/3333',
# '/unix/run/user/1000/piker/chart@3333.sock',
# ]
Wow, update root `conf.toml` to new multiaddr style I don't know how this wasn't already committed but.. drops the legacy `marketstore` tsdb socket info vars since we're going all in on `nativedb` BP
2025-10-03 00:07:23 +00:00
Fix reading font size from user config Was borked on linux if you didn't provide the setting in `conf.toml` due to some logic errors. Fix that by rejigging `DpiAwareFont` internal variables: - add new `._font_size_calc_key: str` which was the old `._font_size` and is only used when no explicit font size is set by the user in the `conf.toml` config: - this is the "key" that is used to lookup a calculation function which attempts to compute a best fit font size given the measured system displays DPI settings and dimensions. - make the `._font_size: int` the **actual** font size integer that is cached and passed to `Qt` to set the size. - this is overridden by user config now if defined. - change the input kwarg `font_size: str` to the constructor to better change the input kwarg `font_size: str` to the constructor to better named private `_font_size_key: str` which gets set to the new `._font_size_calc_key`. Also, adjust all client code which instantiates `DpiAwareFont` to use the new `_font_size_key` kwarg input so nothing breaks XD
2023-06-19 19:13:01 +00:00
[ui]
# set custom font + size which will scale entire UI
# font_size = 16
# font_name = 'Monospaced'
# colorscheme = 'default' # UNUSED
# graphics.update_throttle = 60 # Hz # TODO