Adjust the `soft_wait()` strategy to avoid sending needless cancel
requests if it is known that a child process is already terminated or
does so before the cancel request times out. This should be no slower
and should avoid needless waits on either closure-in-progress or already
closed channels.
Basic strategy is,
- request child actor to cancel
- if process termination is detected, cancel the cancel
- if the process is still alive after a cancel request timeout warn the
user and yield back to the hard reap handling
Better encapsulate all the mem-chan, Queue, sync-primitives inside our
linked task channel in order to avoid `mypy`'s complaints about monkey
patching. This also sets footing for adding an `asyncio`-side channel
API that can be used more like this `trio`-side API.
For whatever reason `trio` seems to be swallowing this exception when
raised in the `trio` task so instead wrap it in our own non-base
exception type: `AsyncioCancelled` and raise that when the `asyncio`
task cancels itself internally using `raise <err> from <src_err>` style.
Further don't bother cancelling the `trio` task (via cancel scope)
since we we can just use the recv mem chan closure error as a signal
and explicitly lookup any set asyncio error.
Wraps the pairs of underlying `trio` mem chans and the `asyncio.Queue`
with this new composite which will be delivered from `open_channel_from()`.
This allows for both sending and receiving values from the `asyncio`
task (2 way msg passing) as well controls for cancelling or waiting on
the task.
Factor `asyncio` translation and re-raising logic into a new closure
which is run on both `trio` side error handling as well as on normal
termination to avoid missing `asyncio` errors even when `trio` task
cancellation is handled first.
Only close the `trio` mem chans on `trio` task termination *iff*
the task was spawned using `open_channel_from()`:
- on `open_channel_from()` exit, mem chan closure is the desired semantic
- on `run_task()` we normally only return a single value or error and
if the channel is closed before the error is raised we may propagate
a `trio.EndOfChannel` instead of the desired underlying `asyncio`
task's error
Pull the common `asyncio` -> `trio` error translation logic into
a common context manager and don't expect a final result to be captured
when using `open_channel_from()` since it's a manager interface and it
would be clunky to try and deliver some "final result" after exit.
Close the mem chan before cancelling the `trio` task in order to ensure
we retrieve whatever error is shuttled from `asyncio` before the channel
read is potentially cancelled (previously a race?).
Handle `asyncio.CancelledError` specially such that we raise it directly
(instead of `raise aio_cancelled from other_err`) since it *is* the
source error in the case where the cancellation is `asyncio` internal.
Clearly this wasn't developed against a task that spawned just an async
func in `asyncio`.. Fix all that and remove a bunch of unnecessary func
layers. Add provisional support for the target receiving the `to_trio`
and `from_trio` channels and for the @tractor.stream marker.
This should mostly maintain top level SC principles for any task spawned
using `tractor.to_asyncio.run()`. When the `asyncio` task completes make
sure to cancel the pertaining `trio` cancel scope and raise any error
that may have resulted. This interface uses `trio`'s "guest-mode" to run
`asyncio` loop using a special entrypoint which is handed to Python
during process spawn.
If the one side of an inter-actor context cancels the other then that
side should always expect back a `ContextCancelled` message. However we
should not set this error in this case (where the cancel request was
sent and a `ContextCancelled` msg was received back) since it may
override some other error that caused the cancellation request to be
sent out in the first place. As an example when a context opens another
context to a peer and some error happens which causes the second peer
context to be cancelled but we want to propagate the original error.
Fixes the issue found in https://github.com/pikers/piker/issues/244
After more extensive testing I realized that keying on the context
manager *instance id* isn't going to work since each entering task is
going to create a unique key XD
Instead pass the manager function as `acm_func` and optionally allow
keying the resource on the passed `kwargs` (if hashable) or the
`key:str`. Further, pass the key to the enterer task and avoid
a separate keying scheme for the manager versus the value it delivers.
Don't bother with checking and releasing the lock in `finally:` block,
it should be an error if it's still locked.
Without this wakeup you can have tasks which re-enter `.receive()`
and get stuck waiting on the wakeup event indefinitely. Whenever
a ``trio.EndOfChannel`` arrives we want to make sure all consumers
at least know about it and don't block. This previous behaviour was
basically a bug.
Add some state flags for tracking if the broadcaster was either
cancelled or terminated via EOC mostly for testing and debugging
purposes though this info might be useful if we decide to offer
a `.statistics()` like API in the future.
This commit obviously denotes a re-license of all applicable parts of
the code base. Acknowledgement of this change was completed in #274 by
the majority of the current set of contributors. From here henceforth
all changes will be AGPL licensed and distributed. This is purely an
effort to maintain the same copy-left policy whilst closing the
(perceived) SaaS loophole the GPL allows for. It is merely for this
loophole: to avoid code hiding by any potential "network providers" who
are attempting to use the project to make a profit without either
compensating the authors or re-distributing their changes.
I thought quite a bit about this change and can't see a reason not to
close the SaaS loophole in our current license. We still are (hard)
copy-left and I plan to keep the code base this way for a couple
reasons:
- The code base produces income/profit through parent projects and is
demonstrably of high value.
- I believe firms should not get free lunch for the sake of
"contributions from their employees" or "usage as a service" which
I have found to be a dubious argument at best.
- If a firm who intends to profit from the code base wants to use it
they can propose a secondary commercial license to purchase with the
proceeds going to the project's authors under some form of well
defined contract.
- Many successful projects like Qt use this model; I see no reason it
can't work in this case until such a time as the authors feel it
should be loosened.
There has been detailed discussion in #103 on licensing alternatives.
The main point of this AGPL change is to protect the code base for the
time being from exploitation while it grows and as we move into the next
phase of development which will include extension into the multi-host
distributed software space.
If we make it too fast a nursery with debug mode children can cancel
too fast and causes some test failures. It's likely not a huge deal
anyway since the purpose of this poll/check is for human interaction
and the current delay isn't really that noticeable.
Decrease log levels in the debug module to avoid console noise when in
use. Toss in some more detailed comments around the new debugger lock
points.
A context method handling all this logic makes the most sense since it
contains all the state related to whether the error should be raised in
a nursery scope or is expected to be raised by a consumer task which
reads and processes the msg directly (via a `Portal` API call). This
also makes it easy to always process remote errors even when there is no
(stream) overrun condition.
A context stream overrun should normally never take place since if
a stream is opened (via ``Context.open_stream()``) backpressure is
applied on the message buffer (unless explicitly disabled by the
``backpressure=False`` flag) such that an overrun on the receiving task
should result in blocking the (remote) sender task (eventually depending
on the underlying ``MsgStream`` transport).
Here we add a special error message that reports if one side never
opened a stream and let's the user know in the overrun error message
that they may be trying to push messages to a task that isn't ready to
receive them.
Further fixes / details:
- pop any `Context` at the end of any `_invoke()` task that creates
one and registers with the runtime.
- ignore but warn about messages received for a context that either
no longer exists or is unknown (guarding against crashes by malicious
packets in the latter case)
Keeping it disabled on context open will help with detecting any stream
connection which was never opened on one side of the task pair. In that
case we can report that there was an overrun **and** a stream wasn't
opened versus if the stream is explicitly configured not to use bp then
we throw the standard overflow.
Use `trio.Nursery._closed` to detect "closure" XD since it seems to be
the most reliable way to determine if a spawn call will trigger
a runtime error.
Half of portal API usage requires a 1 message response (`.run()`,
`.run_in_actor()`) and the streaming APIs should probably be explicitly
enabled for backpressure if desired by the user. This makes more sense
in (psuedo) realtime systems where it's better to notify on a block then
freeze without notice. Make this default behaviour with a new error to
be raised: `tractor._exceptions.StreamOverrun` when a sender overruns
a stream by the default size (2**6 for now). The old behavior can be
enabled with `Context.open_stream(backpressure=True)` but now with
warning log messages when there are overruns.
Add task-linked-context error propagation using a "nursery raising"
technique such that if either end of context linked pair of tasks
errors, that error can be relayed to other side and raised as a form of
interrupt at the receiving task's next `trio` checkpoint. This enables
reliable error relay without expecting the (error) receiving task to
call an API which would raise the remote exception (which it might never
currently if using `tractor.MsgStream` APIs).
Further internal implementation details:
- define the default msg buffer size as `Actor.msg_buffer_size`
- expose a `msg_buffer_size: int` kwarg from `Actor.get_context()`
- maybe raise aforementioned context errors using
`Context._maybe_error_from_remote_msg()` inside `Actor._push_result()`
- support optional backpressure on a stream when pushing messages
in `Actor._push_result()`
- in `_invote()` handle multierrors raised from a `@tractor.context`
entrypoint as being potentially caused by a relayed error from the
remote caller task, if `Context._error` has been set then raise that
error inside the `RemoteActorError` that will be relayed back to that
caller more or less proxying through the source side error back to its
origin.
In preparation for supporting both backpressure detection (through an
optional error) as well as control over the msg channel buffer size, add
internal configuration flags for both to contexts. Also adjust
`Context._err_on_from_remote_msg()` -> `._maybe..` such that it can be
called and will only raise if a scope nursery has been set. Add
a `Context._error` for stashing the remote task's error that may be
delivered in an `'error'` message.
This more formally declares the runtime's remote task startingn API
and uses it throughout all the dependent `Portal` API methods.
Allows dropping `Portal._submit()` and simplifying `.run_in_actor()`
style result waiting to be delegated to the context APIs at remote
task `return` response time. We now also track the remote entrypoint
"type` as `Context._remote_func_type`.
Instead of tracking feeder mem chans per RPC dialog, store `Context`
instances which (now) hold refs to the underlying RPC-task feeder chans
and track them inside a `Actor._contexts` map. This begins a transition
to making the "context" idea the primitive abstraction for representing
messaging dialogs between tasks in different memory domains (i.e.
usually separate processes).
A slew of changes made this possible:
- change `Actor.get_memchans()` -> `.get_context()`.
- Add new `Context._send_chan` and `._recv_chan` vars.
- implicitly create a new context on every `Actor.send_cmd()` call.
- use the context created by `.send_cmd()` in `Portal.open_context()`
instead of manually creating one.
- call `Actor.get_context()` inside tasks run from `._invoke()`
such that feeder chans are implicitly created for callee tasks
thus fixing the bug #265.
NB: We might change some of the internal semantics to do with *when* the
feeder chans are actually created to denote whether or not a far end
task is actually *read to receive* messages. For example, in the cases
where it **never** will be ready to receive messages (one-way streaming,
a context that never opens a stream, etc.) we will likely want some kind
of error or at least warning to the caller that messages can't be sent
(yet).
Previously we were ignoring a race where the callee an opened task
context could enter `Context.open_stream()` before calling `.started().
Disallow this as well as calling `.started()` more then once.
We don't need to any more presuming you get ideal remote cancellation
conditions where the remote actor should teardown and kill the streams
from its end.
On msg loop termination we now check and see if a channel is associated
with a child-actor registered in some local task's nursery. If so, we
attempt to wait on channel closure initiated from the child side (by
draining the underlying msg stream) so as to avoid closing it too early
resulting in the child not relaying its termination status response. This
means we now support the ideal case in 2-general's where we get back the
ack to the closure request instead of just ignoring it and timing out XD
The main implementation detail is that when `Portal.cancel_actor()`
remotely calls `Actor.cancel()` we actually wait for the RPC response
from that request before allowing the channel shutdown sequence to
engage. The new msg stream draining support enables this.
Also, factor child-to-parent error propagation logic into a helper func
and improve some docs (yeah yeah y'all don't like the ''', i don't
care - it makes my eyes not hurt).
Use a `trio.Event` to enable nursery closure detection such that core
runtime tasks can be notified when a local nursery exits and allow
shutdown protocols to operate without close-before-terminate issues
(such as IPC channel closure during remote peer cancellation).
Enables "draining" the last set of messages after a channel/stream has
been terminated mostly for the purposes of receiving a final ACK to
a remote cancel command. Also, add an internal `Channel._cancel_called`
flag which can be set by `Portal.cancel_actor()`.
It's definitely possible to have a nursery spawn task be cancelled
before a `trio.Process` handle is ever returned; we now handle this
case as a cancelled-during-spawn scenario. Zombie collection logic
also is bypassed in this case.
Thanks to @richardsheridan for pointing out the limitations of using
*any* kind of value as the result-cached-flag and how it might cause
problems for anyone returning pickled blob-data. This changes the
`Portal` internal result value tracking to stash the full message from
which the value can be retrieved by any `Portal.result()` caller.
The internal change is that `Portal._return_once()` now returns a tuple
of the message *and* its value.
Fixes the issue where if the main remote task returns `None`,
`Portal.result()` would erroneously wait again on the underlying feeder
mem chan since `None` was being used as the cache flag. Instead set the
flag as the channel uid and consider the result collected when set to
anything else (since it would be odd to return that value from a remote
task when you already can read it as part of portal/channel apis).
The api we've made here is actually closer to `asyncio.gather()` but
with opening async context managers instead of funcs. Use another event
to allow for graceful teardown of children on non-cancellation exits
and add a doc string.
Since it seems we're building out more and more higher level primitives
in order to support certain parallel style actor trees and messaging
patterns (eg. task broadcast channels), we might as well start a new
sub-package for purely `trio` constructions. We hereby dub this
the realm of `trionics` (like electronics but for trios instead of
electrons).
To kick things off, add an `async_enter_all()` concurrent
exit-stack-like context manager API which will concurrently spawn
a sequence of provided async context managers and deliver their ordered
results but with proper support for `trio` cancellation semantics.
The stdlib's `AsyncExitStack` is not compatible with nurseries not
`trio` tasks (which are cancelled) since as task will be suspended on
the stack after push and does not ever hit a checkpoint until the stack
is closed.
This is actually surprisingly easy to grok having gone through a lot of
pain understanding edge cases in the zombie lord dev branch. Basically
we just need to make sure actors are managed in a 2 step reap sequence.
In the "soft" reap phase we wait for the process to terminate on its own
concurrently with (maybe) waiting for its portal's final result (if it's
a `.run_in_actor()`). If this path is cancelled or errors, then we do
a "hard" reap where we timeout and send a signal to the proc to
terminate immediately. The only last remaining trick is to tie in the
root-is-debugger-aware logic to yet again avoid tty clobbers.
As for `Actor.cancel()` requests, do the same for
`Actor._cancel_task()` but use `_invoke()` to ensure
correct msg transactions with caller. Don't cancel task
cancels on a cancel-all-tasks operation in attempt at
more determinism.
Now that we're on our way to a (somewhat) serious beta release I think
it's about time to start de-noising the logging emissions. Since we're
trying out this approach of "stack layer oriented" log levels, I figured
this is a good time to move most of the "warnings" to what they should
be: cancellation monitoring status messages. The level is set to 16
which is just above our "runtime" level but just below the traditional
"info" level. I think this will be a decent approach since usually if
you're confused about why your `tractor` app is behaving unlike you
expect, it's 90% of the time going to be to do with cancellation or
error propagation. This this setup a user can specify the 'cancel' level
and see all the msgs pertaining to both actor and task-in-actor
cancellation mechanics.
The stdlib's `logging.LoggingAdapter` doesn't currently pass through
`stacklevel: int` down to its wrapped logger instance. Hack it here
and get our msgs looking like they would if using a built-in level.
In an effort to have some kind of more formal interface around the
transport layer, add a `MsgTransport` protocol type and use with
the channel composition of message streams. Start a little "key map"
of `(<codec>, <protocol>)` to `MsgTransport` types which can be
dynamically loaded. Add a `Channel.from_stream()` constructor thus
cleaning up the mangled logic that was in the constructor based on
inputs. Drop all the "auto reconnect" channel logic for now since
nothing is using it (internally) and it's likely it will need rework
once we bring in a protocol besides TCP.
`msgspec` sends python lists over the wire
(https://github.com/jcrist/msgspec/issues/30) which is fine and dandy
but we use them as lookup keys so we need to be sure we tuple-cast
first.
This change some super old (and bad) code from the project's very early
days. For some redic reason i must have thought masking `trio`'s
internal stream / transport errors and a TCP EOF as `StopAsyncIteration`
somehow a good idea. The reality is you probably
want to know the difference between an unexpected transport error
and a simple EOF lol. This begins to resolve that by adding our own
special `TransportClosed` error to signal the "graceful" termination of
a channel's underlying transport. Oh, and this builds on the `msgspec`
integration which helped shed light on the core issues here B)
Add a `tractor._ipc.MsgspecStream` type which can be swapped in for
`msgspec` serialization transparently. A small msg-length-prefix framing
is implemented as part of the type and we use
`tricycle.BufferedReceieveStream` to handle buffering logic for the
underlying transport.
Notes:
- had to force cast a few more list -> tuple spots due to no native
`tuple`decode-by-default in `msgspec`: https://github.com/jcrist/msgspec/issues/30
- the framing can be understood by this protobuf walkthrough:
https://eli.thegreenplace.net/2011/08/02/length-prefix-framing-for-protocol-buffers
- `tricycle` becomes a new dependency
Can only really use an encoder currently since there is no streaming api
in `msgspec` as of currently. See jcrist/msgspec#27.
Not sure if any encoding speedups are currently noticeable especially
without any validation going on yet XD.
First experiments toward #196
- drop `shield` input to `MsgStream`
- check for cancel called prior to loading the feeder mem chan
in `Context.open_stream()`
- warn on a timeout when trying to cancel a remote task from
`Context.cancel()`
- drop noop endofchannel handler block
The `collections.deque` takes care of array length truncation of values
for us implicitly but in the future we'll likely want this value exposed
to alternate array implementations. This patch is to provide for that as
well as make `mypy` happy since the `dequeu.maxlen` can also be `None`.
Get rid of all the (requirements for) clones of the underlying
receivable. We can just use a uuid generated key for each instance
(thinking now this can probably just be `id(self)`). I'm fully convinced
now that channel cloning is only a source of confusion and anti-patterns
when we already have nurseries to define resource lifetimes. There is no
benefit in particular when you allocate subscriptions using a context
manager (not sure why `trio.open_memory_channel()` doesn't enforce
this).
Further refinements:
- add a `._closed` state that will error the receiver on reuse
- drop module script section; it's been moved to a real test
- call the "receiver" duck-type stub a new name
This allows for wrapping an existing stream by re-assigning its receive
method to the allocated broadcaster's `.receive()` so as to avoid
expecting any original consumer(s) of the stream to now know about the
broadcaster; this instead mutates the stream to delegate to the new
receive call behind the scenes any time `.subscribe()` is called.
Add a `typing.Protocol` for so called "cloneable channels" until we
decide/figure out a better keying system for each subscription and
mask all undesired typing failures.
Add `ReceiveMsgStream.subscribe()` which allows allocating a broadcast
receiver around the stream for use by multiple actor-local consumer
tasks. Entering this context manager idempotently mutates the stream's
receive machinery which for now can not be undone. Move `.clone()` to
the receive stream type.
Resolves#204
For every set of broadcast receivers which pull from the same producer,
we need a singleton state for all of,
- subscriptions
- the sender ready event
- the queue
Add a `BroadcastState` dataclass for this and pass it to all
subscriptions. This makes the design much more like the built-in memory
channels which do something very similar with `MemoryChannelState`.
Use a `filter()` on the subs list in the sequence update step, plus some
other commented approaches we can try for speed.
Using the current task as a subscription key fails horribly as soon as
you hand off new subscription receiver to another task you've spawned..
Instead use the underlying ``trio.abc.ReceiveChannel.clone()`` as a key
(so i guess we're assuming cloning is supported by the underlying?)
which makes this all work just like default mem chans. As a bonus, now
we can just close the underlying rx (which may be a clone) on
`.aclose()` and everything should just work in terms of the underlying
channels lifetime (i think?).
Change `.subscribe()` to be async since the receive channel type
interface only expects `.aclose()` and it actually ends up being
nicer for 3.9+ style `async with` parentheses style anyway.
Buncha improvements:
- pass in the queue via constructor
- tracking over all underlying memory channel closure using cloning
- do it like `tokio` and set lagged consumers to the last sequence
before raising
- copy the subs on first receiver wakeup for iteration instead of
iterating the table directly (and being forced to skip the current
tasks sequence increment)
- implement `.aclose()` to close the underlying clone for this task
- make `broadcast_receiver()` just take the recv chan since it doesn't
need anything on the send side.
We're not actually using this but it's for reference if we do end up
needing it.
The std lib's `pdb` internals override SIGINT handling whenever one
enters the debugger repl. Force a handler that kills the tree if SIGINT
is triggered from the root actor, otherwise ignore it since supervised
children should be managed already. This resolves an issue with guest
mode where `pdb` causes SIGINTs to be swallowed resulting in the host
loop never terminating the process tree.
The whole origin was not having an explicit open/close semantic for
streams. We have that now so this internal mechanic isn't needed and
further our streams become more correct by having `.aclose()` be
independent of cancellation.
Finally this makes a cancelled root actor nursery not clobber child
tasks which request and lock the root's tty for the debugger repl.
Using an edge triggered event which is set after all fifo-lock-queued
tasks are complete, we can be sure that no lingering child tasks are
going to get interrupted during pdb use and tty lock acquisition.
Further, even if new tasks do queue up to get the lock, the root will
incrementally send cancel msgs to each sub-actor only once the tty is
not locked by a (set of) child request task(s). Add shielding around all
the critical sections where the child attempts to allocate the lock from
the root such that it won't be disrupted from cancel messages from the
root after the acquire lock transaction has started.
If the root calls `trio.Process.kill()` on immediate child proc teardown
when the child is using pdb, we can get stdstreams clobbering that
results in a pdb++ repl where the user can't see what's been typed. Not
killing such children on cancellation / error seems to resolve this
issue whilst still giving reliable termination. For now, code that
special path until a time it becomes a problem for ensuring zombie
reaps.
A context is the natural fit (vs. a receive stream) for locking the root
proc's tty usage via it's `.started()` sync point. Simplify the
`_breakpoin()` routine to be a simple async func instead of all this
"returning a coroutine" stuff from before we decided that
`tractor.breakpoint()` must be async. Use `runtime` level for locking
logging making it easier to trace.
Another face palm that was causing serious issues for code that is using
the `.shielded` feature..
Add a bunch more detailed comments for all this subtlety and hopefully
get it right once and for all. Also aggregated the `trio` errors that
should trigger closure inside `.aclose()`, hopefully that's right too.
Revert this change since it really is poking at internals and doesn't
make a lot of sense. If the context is going to be cancelled then the
msg loop will tear down the feed memory channel when ready, we don't
need to be clobbering it and confusing the runtime machinery lol.
Add clear teardown semantics for `Context` such that the remote side
cancellation propagation happens only on error or if client code
explicitly requests it (either by exit flag to `Portal.open_context()`
or by manually calling `Context.cancel()`). Add `Context.result()`
to wait on and capture the final result from a remote context function;
any lingering msg sequence will be consumed/discarded.
Changes in order to make this possible:
- pass the runtime msg loop's feeder receive channel in to the context
on the calling (portal opening) side such that a final 'return' msg
can be waited upon using `Context.result()` which delivers the final
return value from the callee side `@tractor.context` async function.
- always await a final result from the target context function in
`Portal.open_context()`'s `__aexit__()` if the context has not
been (requested to be) cancelled by client code on block exit.
- add an internal `Context._cancel_called` for context "cancel
requested" tracking (much like `trio`'s cancel scope).
- allow flagging a stream as terminated using an internal
`._eoc` flag which will mark the stream as stopped for iteration.
- drop `StopAsyncIteration` catching in `.receive()`; it does
nothing.
This mostly adds the api described in
https://github.com/goodboy/tractor/issues/53#issuecomment-806258798
The first draft summary:
- formalize bidir steaming using the `trio.Channel` style interface
which we derive as a `MsgStream` type.
- add `Portal.open_context()` which provides a `trio.Nursery.start()`
remote task invocation style for setting up and tearing down tasks
contexts in remote actors.
- add a distinct `'started'` message to the ipc protocol to facilitate
`Context.start()` with a first return value.
- for our `ReceiveMsgStream` type, don't cancel the remote task in
`.aclose()`; this is now done explicitly by the surrounding `Context`
usage: `Context.cancel()`.
- streams in either direction still use a `'yield'` message keeping the
proto mostly symmetric without having to worry about which side is the
caller / portal opener.
- subtlety: only allow sending a `'stop'` message during a 2-way
streaming context from `ReceiveStream.aclose()`, detailed comment
with explanation is included.
Relates to #53
Since we currently have no real "discovery protocol" between process
trees, the current naive approach is to check via a connect and drop to
see if a TCP server is bound to a particular address during root actor
startup. This was a historical decision and had no real grounding beyond
taking a simple approach to get something working when the project
was first started.
This is obviously problematic from an error handling perspective since
we need to be able to avoid such quick connect-and-drops from cancelling
an "arbiter"'s (registry actor's) channel-msg loop machinery (which
would propagate and cancel the actor).
For now we map this particular TCP error, which gets remapped by `trio`
as a `trio.BrokenResourceError` to our own internal `TransportClosed`
which is swallowed by channel message loop processing and indicates
a graceful teardown of the far end actor.
This change some super old (and bad) code from the project's very early
days. For some redic reason i must have thought masking `trio`'s
internal stream / transport errors and a TCP EOF as `StopAsyncIteration`
somehow a good idea. The reality is you probably
want to know the difference between an unexpected transport error
and a simple EOF lol. This begins to resolve that by adding our own
special `TransportClosed` error to signal the "graceful" termination of
a channel's underlying transport. Oh, and this builds on the `msgspec`
integration which helped shed light on the core issues here B)
It's clear now that special attention is needed to handle the case where
a spawned `multiprocessing` proc is started but then the parent is
cancelled before the child can connect back; in this case we need to be
sure to kill the near-zombie child asap. This may end up being the
solution to other resiliency issues seen around mp with nested process
trees too. More testing is needed to be sure.
Relates to #84#89#134#146
NB: this is a breaking change removing support for `Portal.run()` being
able to invoke remote streaming functions and instead replacing the
method call with an async context manager api `Portal.open_stream_from()`
This style explicitly defines stream teardown at the call site instead
of expecting the user to handle tricky things correctly themselves: eg.
`async_geneartor.aclosing()`. Going forward `Portal.run()` can be used
only for invoking async functions.
Move receive stream into streaming modules and rebrand as a "message
stream". Factor out cancellation mechanics in `.aclose()` into the
`Context` type which will soon provide the api for for cancelling portal
invocations. Comment-stage a few methods on both types in anticipation
of a new bi-directional streaming api. Add a `MsgStream` bidirectional
channel type which will be the eventual type yielded from
`Context.open_stream()`. Adjust the response/dialog types to be the set
`{'asyncfun', 'asyncgen', 'context'}`. OH, and add async func checking
in `Portal.run()` to catch and error on sync funcs early.
You can always wrap a sync function in an async one and there seems to
be no good reason to support invoking them directly especially since
cancellation won't work without some thread hackery. If it's requested
we'll point users to `trio-parallel`.
Resolves#77
Add a sync method that can be used to cancel the current actor from
a synchronous context. This is useful in debugging situations where
sync debugger code may need to kill the process tree.
Also, make the internal "lifetime stack" a global var; easier to manage
from client code that may was to add callbacks prior to the actor
runtime being fully setup.
Using `None` as the default key for a `@msg.pub` can cause conflicts if
there is more then one "taskless" (no tasks={,} passed) pub offered on
an actor... So instead use the first trio "task name" (usually just the
function name) instead thus avoiding this very hard to debug and
understand problem.
Probably should throw in a test but I'm super lazy today.
This begins the move to dropping support for `tractor.run()` which we
don't really need since the runtime is started (as it always has been)
from a new sub-task / nursery. Instead this introduces starting the
actor tree through a `open_root_actor()` async context manager which
we'll likely implicitly call (from the root) on the first use of an
actor nursery.
Drop `_actor._start_actor()` and factor its contents into this new api.
Make `run()` and `run_daemon()` use `open_root_actor()` until we decide
to remove them.
Relates to #168 and #177
It turns out in order to maintain our sneaky little "call an `Actor`
method in this remote process" we still need the ability to invoke
functions from a namespace. We're currently using a "self" namespace as
a way to do this for internal inter-process method calling. Either way,
I see no reason not to keep a public method for this invoke style (we
just won't market it) since it is still how the machinery works
underneath.
This resolves and completes #69 allowing all RPC invocation APIs to pass
function references directly instead of explicit `str` names for the
target namespace and function (this is still done implicitly
underneath). This brings us closer to `trio`'s task running API as well
as acknowledges that any inter-host RPC system (and API) will likely
need to be implemented on top of local RPC primitives anyway. Even if
this ends up **not** being true we can always go to "function stubs" as
part of our IAC protocol or, add a new method to do explicit namespace
calls: `.run_from_module()` or whatever everyone votes on.
Resolves#69
Further, this commit drops `Actor.statespace` from the entire system
since a user can easily get this same functionality using module
level variables. Fix docs to match all these changes (luckily mostly
already done due to example scripts referencing).
Add a ``tractor._portal.StreamReceiveChannel.shield_channel()`` context
manager which allows for avoiding the closing of an IPC stream's
underlying channel for the purposes of task re-spawning. Sometimes you
might want to cancel a task consuming a stream but not tear down the IPC
between actors (the default). A common use can might be where the task's
"setup" work might need to be redone but you want to keep the
established portal / channel in tact despite the task restart.
Includes a test.
Turns out this is a lower level issue in terms of the stdlib's default
`pdb.Pdb` settings and how they conflict with `trio`s cancellation and
KBI handling. The details are hashed out more thoroughly in
python-trio/trio#1155. Maybe we can get a fix in trio so things are
solved under our feet :)
The channel server should be torn down *before* the rpc
task/service nursery. Do this explicitly even in the root's main task
to avoid a strange hang I found in the pubsub tests. Start dropping
the `warnings.warn()` usage.
Add `Actor._cancel_called` and `._cancel_complete` making it possible to
determine whether the actor has started the cancellation sequence and
whether that sequence has fully completed. This allows for blocking in
internal machinery tasks as necessary. Also, always trigger the end of
ongoing rpc tasks even if the last task errors; there's no guarantee the
trio cancellation semantics will guarantee us a nice internal "state"
without this.
For reliable remote cancellation we need to "report" `trio.Cancelled`s
(just like any other error) when exhausting a portal such that the
caller can make decisions about cancelling the respective actor if need
be.
Resolves#156
Every subactor in the tree now receives the socket (or whatever the
mailbox type ends up being) during startup and can call the new
`tractor._discovery.get_root()` function to get a portal to the current
root actor in their tree. The main reason for adding this atm is to
support nested child actors gaining access to the root's tty lock for
debugging.
Also, when a channel disconnects from a message loop, might as well kill
all its rpc tasks.
It's not like any of this code is really being used anyway since we
aren't indefinitely blocking for cancelled subactors to terminate (yet).
Drop the `do_hard_kill()` bit for now and just rely on the underlying
process api. Oh, and mark the nursery as cancelled asap.
Seems like the request task cancel scope is actually solving all the
deadlock issues and masking SIGINT isn't changing much behaviour at all.
I think let's keep it unmasked for now in case it does turn out useful
in cancelling from unrecoverable states while in debug.
This is needed in order to avoid the deadlock condition where
a child actor is waiting on the root actor's tty lock but it's parent
(possibly the root) is waiting on it to terminate after sending a cancel
request. The solution is simple: create a cancel scope around the
request in the child and always cancel it when a cancel request from the
parent arrives.
There seems to be no good reason not too since our cancellation
machinery/protocol should do this work when the root receives the
signal. This also (hopefully) helps with some debugging race condition
stuff.
This seems to prevent a certain class of bugs to do with the root actor
cancelling local tasks and getting into deadlock while children are
trying to acquire the tty lock. I'm not sure it's the best idea yet
since you're pretty much guaranteed to get "stuck" if a child activates
the debugger after the root has been cancelled (at least "stuck" in
terms of SIGINT being ignored). That kinda race condition seems to still
exist somehow: a child can "beat" the root to activating the tty lock
and the parent is stuck waiting on the child to terminate via its
nursery.
This aids with tearing down resources **after** the crash handling and
debugger have completed. Leaving this internal for now but should
eventually get a public convenience function like
`tractor.context_stack()`.
Keep an actor local (bool) flag which determines if there is already
a running debugger instance for the current process. If another task
tries to enter in this case, simply ignore it since allowing entry may
result in a deadlock where the new task will be sync waiting on the
parent stdio lock (a case that will never arrive due to the current
debugger's active use of it).
In the future we may want to allow FIFO queueing of local tasks where
instead of ignoring re-entrant breakpoints we allow tasks to async wait
for debugger release, though not sure the implications of that since
you'd likely want to support switching the debugger to the new task and
that could cause deadlocks where tasks are inter-dependent. It may be
more sane to just error on multiple breakpoint requests within an actor.
This is the first step in addressing #113 and the initial support
of #130. Basically this allows (sub)processes to engage the `pdbpp`
debug machinery which read/writes the root actor's tty but only in
a FIFO semaphored way such that no two processes are using it
simultaneously. That means you can have multiple actors enter a trace or
crash and run the debugger in a sensible way without clobbering each
other's access to stdio. It required adding some "tear down hooks" to
a custom `pdbpp.Pdb` type such that we release a child's lock on the
parent on debugger exit (in this case when either of the "continue" or
"quit" commands are issued to the debugger console).
There's some code left commented in anticipation of full support for
issue #130 where we're need to actually capture and feed stdin to the
target (remote) actor which won't necessarily being running on the same
host.
Allow entering and attaching to a `pdb` instance in a child process.
The current hackery is to have the child make an rpc to the parent and
ask it to hijack stdin, once complete the child enters a `pdb` blocking
method. The parent then relays all stdin input to the child thus
controlling the "remote" debugger.
A few things were added to accomplish this:
- tracking the mapping of subactors to their parent nurseries
- in the root actor, cancelling all nurseries under the root `trio` task
on cancellation (i.e. `Actor.cancel()`)
- pass a "runtime vars" map down the actor tree for propagating global state
In an effort acquire more deterministic actor cancellation,
this adds a clearer and more resilient (whilst possibly a bit
slower) internal nursery structure with explicit semantics for
clarifying the task-scope shutdown sequence.
Namely, on cancellation, the explicit steps are now:
- cancel all currently running rpc tasks and wait
for them to complete
- cancel the channel server and wait for it to complete
- cancel the msg loop for the channel with the immediate parent
- de-register with arbiter if possible
- wait on remaining connections to release
- exit process
To accomplish this add a new nursery called the "service nursery" which
spawns all rpc tasks **instead of using** the "root nursery". The root
is now used solely for async launching the msg loop for the primary
channel with the parent such that it is (nearly) the last thing torn
down on cancellation.
In the future it should also be possible to have `self.cancel()` return
a result to the parent once the runtime is sure that the rest of the
shutdown is atomic; this would allow for a true unbounded shield in
`Portal.cancel_actor()`. This will likely require that the error
handling blocks in `Actor._async_main()` are moved "inside" the root
nursery block such that the msg loop with the parent truly is the last
thing to terminate.
Always shield waiting for he process and always run
``trio.Process.__aexit__()`` on teardown. This enforces
that shutdown happens to due cancellation triggered inside
the sub-actor instead of the process being killed externally
by the parent.
Trio will kill subprocesses via `Process.__aexit__()` using a `finally:`
block (which, yes, will get triggered on cancellation) so we avoid that
until true process "tear down" since subactors do many things during
graceful shutdown (such as de-registering from the name discovery
system). Oddly this only seems to be an issue during cancellation of
infinite stream consumption.
Resolves#141
In order to have reliable subactor startup we need the following
sequence to take place:
- connect to the parent actor, handshake and receive runtime state
- load exposed modules into memory
- start the channel server up fully using the provided bind address
- finally, start processing new messages from the parent
Add a bunch more comments to clarify all this.
Using the context manager interface does some extra teardown beyond simply
calling `.wait()`. Pass the subactor's "uid" on the exec line for
debugging purposes when monitoring the process tree from the OS.
Hard code the child script module path to avoid a double import warning.
This is an edit to factor out changes needed for the `asyncio` in guest mode
integration (which currently isn't tested well) so that later more pertinent
changes (which are tested well) can be rebased off of this branch and
merged into mainline sooner. The *infect_asyncio* branch will need to be
rebased onto this branch as well before merge to mainline.
This is an initial solution for #120.
Allow spawning `asyncio` based actors which run `trio` in guest
mode. This enables spawning `tractor` actors on top of the `asyncio`
event loop whilst still leveraging the SC focused internal actor
supervision machinery. Add a `tractor.to_syncio.run()` api to allow
spawning tasks on the `asyncio` loop from an embedded (remote) `trio`
task and return or stream results all the way back through the `tractor`
IPC system using a very similar api to portals.
One outstanding problem is getting SC around calls to
`asyncio.create_task()`. Currently a task that crashes isn't able to
easily relay the error to the embedded `trio` task without us fully
enforcing the portals based message protocol (which seems superfluous
given the error ref is in process). Further experiments using `anyio`
task groups may alleviate this.
The logic in the `ActorNursery` block is critical to cancellation
semantics and in particular, understanding how supervisor strategies are
invoked. Stick in a bunch of explanatory comments to clear up these
details and also prepare to introduce more supervisor strats besides
the current one-cancels-all approach.
Instead of hackery trying to map modules manually from the filesystem
let Python do all the work by simply copying what ``multiprocessing``
does to "fixup the __main__ module" in spawned subprocesses. The new
private module ``_mp_fixup_main.py`` is simply cherry picked code from
``multiprocessing.spawn`` which does just that. We only need these
"fixups" when using a backend other then ``multiprocessing``; for
now just when using ``trio_run_in_process``.
Thanks to @salotz for pointing out that the first example in the docs
was broken. Though it's somewhat embarrassing this might also explain
the problem in #79 and certain issues in #59...
The solution here is to import the target RPC module using the its
unique basename and absolute filepath in the sub-actor that requires it.
Special handling for `__main__` and `__mp_main__` is needed since the
spawned subprocess will have no knowledge about these parent-
-state-specific module variables. Solution: map the modules name to the
respective module file basename in the child process since the module
variables will of course have different values in children.
Add a `--spawn-backend` option which can be set to one of {'mp',
'trio_run_in_process'} which will either run the test suite using the
`multiprocessing` or `trio-run-in-process` backend respectively.
Currently trying to run both in the same session can result in hangs
seemingly due to a lack of cleanup of forkservers / resource trackers
from `multiprocessing` which cause broken pipe errors on occasion (no
idea on the details).
For `test_cancellation.py::test_nested_multierrors`, use less nesting
when mp is used since it breaks if we push it too hard with the
whole recursive subprocess spawning thing...
Set `trio-run-in-process` as the default on *nix systems and
`multiprocessing`'s spawn method on Windows. Enable overriding the
default choice using `tractor._spawn.try_set_start_method()`. Allows
for easy runs of the test suite using a user chosen backend.
This took a ton of tinkering and a rework of the actor nursery tear down
logic. The main changes include:
- each subprocess is now spawned from inside a trio task
from one of two containing nurseries created in the body of
`tractor.open_nursery()`: one for `run_in_actor()` processes and one for
`start_actor()` "daemons". This is to address the need for
`trio-run-in_process.open_in_process()` opening a nursery which must
be closed from the same task that opened it. Using this same approach
for `multiprocessing` seems to work well. The nurseries are waited in
order (rip actors then daemon actors) during tear down which allows
for avoiding the recursive re-entry of `ActorNursery.wait()` handled
prior.
- pull out all the nested functions / closures that were in
`ActorNursery.wait()` and move into the `_spawn` module such that
that process shutdown logic takes place in each containing task's
code path. This allows for vastly simplifying `.wait()` to just contain an
event trigger which initiates process waiting / result collection.
Likely `.wait()` should just be removed since it can no longer be used
to synchronously wait on the actor nursery.
- drop `ActorNursery.__aenter__()` / `.__atexit__()` and move this
"supervisor" tear down logic into the closing block of `open_nursery()`.
This not only cleans makes the code more comprehensible it also
makes our nursery implementation look more like the one in `trio`.
Resolves#93
Get a few more things working:
- fail reliably when remote module loading goes awry
- do a real hacky job of module loading using `sys.path` stuffsies
- we're still totally borked when trying to spin up and quickly cancel
a bunch of subactors...
It's a small move forward I guess.
Prepend the actor and task names in each log emission. This makes
debugging much more sane since you can see from which process and
running task the log message originates from!
Resolves#13
If a nursery fails to cancel (some sub-actors presumably) then hard kill
the whole process tree to avoid hangs during a catastrophic failure.
This logic may get factored out (and changed) as we introduce custom
supervisor strategies.
`trio.MultiError` isn't an `Exception` (derived instead from
`BaseException`) so we have to specially catch it in the task
invocation machinery and ship it upwards (like regular errors)
since nurseries running in sub-actors can raise them.
Add `@tractor.stream` which must be used to denote non async generator
streaming functions which use the `tractor.Context` API to push values.
This enforces a more explicit denotation as well as allows enforcing the
declaration of the `ctx` argument in definitions.
This begins moving toward explicitly decorated "streaming functions"
instead of checking for a `ctx` arg in the signature.
- provide each context with its task's top level `trio.CancelScope`
such that tasks can cancel themselves explictly if needed via calling
`Context.cancel_scope()`
- make `Actor.cancel_task()` a private method (`_cancel_task()`) and
handle remote rpc calls specially such that the caller does not need
to provide the `chan` argument; non-primitive types can't be passed on
the wire and we don't want the client actor be require knowledge of
the channel instance the request is associated with. This also ties into
how we're tracking tasks right now (`Actor._rpc_tasks` is keyed by the
call id, a UUID, *plus* the channel).
- make `_do_handshake` a private actor method
- use UUID version 4
Add full support for using the "spawn" process starting method as per:
https://docs.python.org/3/library/multiprocessing.html#contexts-and-start-methods
Add a `spawn_method` argument to `tractor.run()` for specifying the
desired method explicitly. By default use the "fastest" method available.
On *nix systems this is the original "forkserver" method.
This should be the solution to getting windows support!
Resolves#60
As mentioned in prior commits there's currently a bug in Python that
make async gens **not** task safe. Since this is the core cause of almost
all recent problems, instead implement our own async iterator derivative of
`trio.abc.ReceiveChannel` by wrapping a `trio._channel.MemoryReceiveChannel`.
This fits more natively with the memory channel API in ``trio`` and adds
potentially more flexibility for possible bidirectional inter-actor streaming
in the future.
Huge thanks to @oremanj and of course @njsmith for guidance on this one!
For now stop `.aclose()`-ing all async gens on portal close since it can
cause hangs and other weird behaviour if another task operates on the
same instance.
See https://bugs.python.org/issue32526.
Use an inner function / closure to properly process required arguments
at call time as is recommended in the `wrap` docs. Do async gen and
arg introspection at decorate time and raise appropriate type errors.
Turns out you get a bad situation if the target actor who's task you're
trying to cancel has already died (eg. from an external
`KeyboardInterrupt` or other error) and so we need to eventually bail on
the RPC request. Also don't bother closing the channel created in
`open_portal()` manually since the cancel scope should take care of all
that.
- when calling the async gen func provided by the user wrap it in
`@async_generator.aclosing` to ensure correct teardown at cancel time
- expect the gen to yield a dict with topic keys and data values
- add a `packetizer` function argument to the api allowing a user
to format the data to be published in whatever way desired
- support using the decorator without the parentheses (using default
arguments)
- use a `wrapt` "adapter" to override the signature presented to the
`_actor._invoke` inspection machinery
- handle the default case where `tasks` isn't provided; allow only one
concurrent publisher task
- store task locks in an actor local variable
- add a comprehensive doc string
Use the new `Actor.cancel_task()` api to remotely cancel streaming
tasks spawned by a portal. This guarantees that if an actor is
cancelled all its (remote) portal spawned tasks will be as well.
On portal teardown only cancel all async
generator calls (though we should cancel all RPC requests in general
eventually) and don't close the channel since it may have been passed
in from some other context that wishes to keep it connected. In
`open_portal()` run the message loop shielded so that if the local
task is cancelled, messaging will continue until the internal scope
is cancelled at end of block.
Enable cancelling specific tasks from a peer actor such that when
a actor task or the actor itself is cancelled, remotely spawned tasks
can also be cancelled. In much that same way that you'd expect a node
(task) in the `trio` task tree to cancel any subtasks, actors should
be able to cancel any tasks they spawn in separate processes.
To enable this:
- track rpc tasks in a flat dict keyed by (chan, cid)
- store a `is_complete` event to enable waiting on specific
tasks to complete
- allow for shielding the msg loop inside an internal cancel scope
if requested by the caller; there was an issue with `open_portal()`
where the channel would be torn down because the current task was
cancelled but we still need messaging to continue until the portal
block is exited
- throw an error if the arbiter tries to find itself for now
Add a draft pub-sub API `@tractor.msg.pub` which allows
for decorating an asyn generator which can stream topic keyed
dictionaries for delivery to multiple calling / consuming tasks.
Instead of chan/cid, whenever a remote function defines a `ctx` argument
name deliver a `Context` instance to the function. This allows remote
funcs to provide async generator like streaming replies (and maybe more
later).
Additionally,
- load actor modules *after* establishing a connection to the spawning
parent to avoid crashing before the error can be reported upwards
- fix a bug to do with unpacking and raising local internal actor errors
from received messages
RPC module/function lookups should not cause the target actor to crash.
This change instead ships the error back to the calling actor allowing
for the remote actor to continue running depending on the caller's
error handling logic. Adds a new `ModuleNotExposed` error to accommodate.
I'm not sure how this ever worked but when a "fake" async gen
(i.e. function with special `chan`, `cid` kwargs) is completed
we need to signal the end of the stream just like with normal
async gens. Also don't fail when trying to remove tasks that were
never tracked.
Fixes#46
At the expense of a bit more complexity in `ActorNursery.wait()`
(which I commented the heck out of fwiw) this adds far superior and
correct cancellation semantics for when a nursery is cancelled due
to (remote) errors in subactors.
This includes:
- `wait()` will now raise a `trio.MultiError` if multiple subactors
error with the same semantics as in `trio`.
- in `wait()` portals which are paired with `run_in_actor()`
spawned subactors (versus `start_actor()`) are waited on separately
and if the nursery **hasn't** been cancelled but there are errors
those are raised immediately before waiting on `start_actor()`
subactors which will block indefinitely if they haven't been
explicitly cancelled.
- if `wait()` does raise when the nursery hasn't yet been cancelled
it's expected that it will be called again depending on the actor
supervision strategy (i.e. right now we operate with a one-cancels-all
strategy, the same as `trio`, so `ActorNursery.__aexit__() calls
`cancel()` if any error is raised by `wait()`).
Oh and I added `is_main_process()` helper; can't remember why..
Use the new custom error types throughout the actor and portal
primitives and set a few new rules:
- internal errors are any error not raised by an rpc task and are
**not** forwarded to portals but instead are raised directly in
the msg loop.
- portals always re-raise a "main task" error for every call to
``Portal.result()``.
When an actor has already been registered with the arbiter it should
exist in the registry and thus the wait event should have been removed.
Check that the registry indeed holds an event before clearing it.
This is purely for documentation purposes for now as it should be
obvious a bunch of the signatures aren't using the correct "generics"
syntax (i.e. the use of `(str, int)` instead of `typing.Tuple[str, int])`)
in a bunch of places. We're also not using a type checker yet and besides,
`trio` doesn't really expose a lot of its internal types very well.
2SQASH
Something changed in 3.7 (likely to do with changes to the core
import system) that requires explicitly importing our version
of `forkserver.main()` in order to guarantee the server runs our
module code. Override `forkserver.ensure_running()`; specifically,
modify the python launch command.
This ensures that internal errors received from a remote actor are
indeed raised even in the `MainProcess` **before** comms tasks are
cancelled. Internal error in this case means any error packet received
on a channel that doesn't have a `cid` header. RPC errors (which **do**
have a `cid` header) are still forwarded to the consuming caller as usual.
If an internal error is bubbled up from some sub-actor throw that error
into the `MainProcess` "main" async function / coro in order to trigger
nursery teardowns (i.e. cancellations) that need to be done.
I'll likely change this shortly back to where we run a "main task"
inside `actor._async_main()`...
Allows for waiting on another actor (by name) to register with the
arbiter. This makes synchronized actor spawning and consecutive task
coordination easier to accomplish from within sub-actors.
Resolves#31
This allows for registering more then one actor with the same "name"
when you have multiple actors fulfilling the same role. Eventually
we'll need support for looking up all actors registered under a given
"service name" (or whatever we decide to call it).
Also, a fix to the arbiter such that each new instance refers to a
separate `_registry` dict (found an issue with duplicate names during
testing).
Resolves#7
Start a forkserver once in the main (parent-most) process
and pass ipc info (fds) to subprocesses manually such that embedded
calls to `multiprocessing.Process.start()` just work. Note that this
relies on our overridden version of the stdlib's
`multiprocessing.forkserver` module.
Resolves#6
The stdlib insists on creating multiple forkservers and semaphore trackers
for each sub-sub-process launched. This isn't ideal since it costs each
`tractor` sub-actor an additional 2 more processes then necessary and is
confusing when viewed as a process tree (eg. via `pstree`).
The majority of the change is simply avoiding the call to
`forkserver.ensure_running()` and `semaphore_tracker.ensure_running()`
in `ForkServer.connect_new_process()` and instead treating the user like
an adult and expecting those calls to be made *once* in the parent most
process (i.e. what `multiprocessing` calls the `MainProcess`).
Really a proper patch should be made against cpython which allows for
similar manual management of the server along with a mechanism to communicate
forkserver and semaphore tracker fd info to sub-processes such that
further calls to `Process.start()` work as expected.
Relates to #6
Stop worrying about a "main task" in each actor and instead add an
additional `ActorNursery.run_in_actor()` method which wraps calls
to create an actor and run a lone RPC task inside it. Note this
adjusts the public API of `ActorNursery.start_actor()` to drop
its `main` kwarg.
The dirty deats of making this possible:
- each spawned RPC task is now tracked with a specific cancel scope such
that when the actor is cancelled all ongoing responders are cancelled
before any IPC/channel machinery is closed (turns out that spawning
new actors from `outlive_main=True` actors was probably borked before
finally getting this working).
- make each initial RPC response be a packet which describes the
`functype` (eg. `{'functype': 'asyncfunction'}`) allowing for async
calls/submissions by client actors (this was required to make
`run_in_actor()` work - `Portal._submit()` is the new async method).
- hooray we can stop faking "main task" results for daemon actors
- add better handling/raising of internal errors caught in the bowels of
the `Actor` itself.
- drop the rpc spawning nursery; just use the `Actor._root_nursery`
- only wait on `_no_more_peers` if there are existing peer channels that
are actually still connected.
- an `ActorNursery.__aexit__()` now implicitly waits on `Portal.result()` on close
for each `run_in_actor()` spawned actor.
- handle cancelling partial started actors which haven't yet connected
back to the parent
Resolves#24
Take @njsmith's advice and properly close actor invoked async generators
using `async_generator.aclosing()` instead of hacking it (as previous)
with a shielded cancel scope.
Cancellation requires that each actor cancel it's spawned subactors
before cancelling its own root (nursery's) cancel scope to avoid breaking
channel connections before kill commands (`Actor.cancel()`) have been sent
off to peers. To solve this, ensure each main task is cancelled to
completion first (which will guarantee that all actor nurseries have
completed their cancellation steps) before cancelling the actor's "core"
tasks under the "root" scope.
Here is a bunch of code tightening to make sure cancellation works even
if recently spawned actors haven't fully started up and the parent is
cancelled.
The fixes include:
- passing the arbiter socket address to each actor
- ensure all spawned actors respect the spawner's log level
- handle process versus final `portal.result()` teardown in multiple
tasks such that if a proc dies before shipping a result we don't wait
- more detailed debug logging in teardown code paths
- don't store peer connected events in the same `dict` as the peer channels
- if necessary fake main task results on peer channel disconnect
- warn when a `trio.Cancelled` is what causes a nursery to bail
otherwise error
- store the subactor portal in the nursery for teardown purposes
- add dedicated `Portal.cancel_actor()` which acts as a "hard cancel"
and never blocks (indefinitely)
- add `Arbiter.unregister_actor()` it's more explicit what's being
requested
- Allow passing in a program-wide `loglevel`
- Add detailed debug logging particularly to do with channel msg processing
and connection handling
- Don't daemonize subprocesses for now as it prevents use of
sub-sub-actors (need to solve #6 first)
- Add a `Portal.close()` which just tells the remote actor to tear down
the channel (for now)
- Add a message to signal the remote `StopAsyncIteration` from an async
gen such that the client side terminates properly as well
- Make `Actor.cancel()` cancel the channel server first
- Actors *must* complete the arbiter registeration steps before moving
on with their main taks and rpc handling
- When delivering rpc responses (using the local per caller queue) use
the blocking interface (`trio.Queue.put()`) to get backpressure
- Properly detect an `partial` wrapped async generators in `_invoke`
Fix quite a few little bugs:
- async gen func detection in `_invoke()`
- always cancel channel server on main task exit
- wait for remaining channel peers after unsub from arbiter
- return result from main task(s) all the way up to `tractor.run()`
Also add a `Portal.result()` for getting the final result(s) from the
actor's main task and fix up a bunch of docs.
Tyler Goodlet
overclockworked64
goodboy
Guillermo Rodriguez
Tyler Goodlet
Christian López Barrón
goodboy