Type hint all ctx managers in _ringbuf.py
Remove unnecesary send lock on ring chan sender
Handle EOF on ring chan receiver
Rename ringbuf tests to make it less redundant
Add EOF signaling mechanism
Support proper `receive_some` end of stream semantics
Add StapledStream non-ipc test
Create MsgpackRBStream similar to MsgpackTCPStream for buffered whole-msg reads
Add EventFD.read cancellation on EventFD.close mechanism using cancel scope
Add test for eventfd cancellation
Improve and add docstrings
Add trio.StrictFIFOLock on sender.send_all
Support max_bytes argument on receive_some, keep track of write_ptr on receiver
Add max_bytes receive test test_ringbuf_max_bytes
Add docstrings to all ringbuf tests
Remove EFD_NONBLOCK support, not necesary anymore since we can use abandon_on_cancel=True on trio.to_thread.run_sync
Close eventfd's after usage on open_ringbuf
Namely transferring the `Actor` peer-`Channel` tracking attrs,
- `._peers` which maps the uids to client channels (with duplicates
apparently..)
- the `._peer_connected: dict[tuple[str, str], trio.Event]` child-peer
syncing table mostly used by parent actors to wait on sub's to connect
back during spawn.
- the `._no_more_peers = trio.Event()` level triggered state signal.
Further we move over with some minor reworks,
- `.wait_for_peer()` verbatim (adjusting all dependants).
- factor the no-more-peers shielded wait branch-block out of
the end of `async_main()` into 2 new server meths,
* `.has_peers()` with optional chan-connected checking flag.
* `.wait_for_no_more_peers()` which *just* does the
maybe-shielded `._no_more_peers.wait()`
Namely while what I was actually trying to solve was why
`TransportClosed` was getting raised from `Portal.cancel_actor()` but
still useful edge case auditing either way. Also opts into the
`debug_mode` fixture with apprope timeout adjustment B)
That is moving from `._addr`,
- `TCPAddress` to `.ipc._tcp`
- `UDSAddress` to `.ipc._uds`
Obviously this requires adjusting a buncha stuff in `._addr` to avoid
import cycles (the original reason the module was not also included in
the new `.ipc` subpkg) including,
- avoiding "unnecessary" imports of `[Unwrapped]Address` in various modules.
* since `Address` is a protocol and the main point is that it **does
not need to be inherited** per
(https://typing.python.org/en/latest/spec/protocol.html#terminology)
thus I removed the need for it in both transport submods.
* and `UnwrappedAddress` is a type alias for tuples.. so we don't
really always need to be importing it since it also kinda obfuscates
what the underlying pairs are.
- not exporting everything in submods at the `.ipc` top level and
importing from specific submods by default.
- only importing various types under a `if typing.TYPE_CHECKING:` guard
as needed.
In `tests/test_advanced_faults.py` that is.
Since instead of zero-responses like we'd expect from a network-socket
we actually can get a few differences from the OS when "everything IPC
is known"
XD
Namely it's about underlying `trio` exceptions versus how we wrap them
and how we expect to box them. A `TransportClosed` boxing improvement
is coming in follow up btw to make this all work!
B)
Via a new accumulative `--tpt-proto` arg you can select which
`tpt_protos: list[str]`-fixture protocol keys will be delivered to
opting in tests!
B)
Also includes,
- CLI quote handling/stripping.
- default of 'tcp'.
- only support one selection per session at the moment (until we figure
out how we want to support multiples, either simultaneously or
sequentially).
- draft a (masked) dynamic-`metafunc` parametrization in the
`pytest_generate_tests()` hook.
- first proven and working use in the `test_advanced_faults`-suite (and
thus its underlying
`examples/advanced_faults/ipc_failure_during_stream.py` script)!
|_ actually needed this to prove that the suite only has 2 failures on
'uds' seemingly due to low-level `trio` error semantics translation
differences to do with with calling `socket.close()`..
On a very nearly related topic,
- draft an (also commented out) `set_script_runtime_args()` fixture idea
for a std way of `partial`-ling in runtime args to `examples/`
scripts-as-modules defining a `main()` which would proxy to
`tractor.open_nursery()`.
There was a very strange legacy test
`test_spawning.test_local_arbiter_subactor_global_state` which was
causing unforseen hangs/errors on the UDS tpt and looking deeper this
test was already doing root-actor things that should never have been
valid XD
So rework that test to properly demonstrate something of value
(i guess..) and add a new suite which start more rigorously auditing our
`open_root_actor()` permitted usage.
For the old test,
- since the main point of this test seemed to be the ability to invoke
the same function in both the parent and child actor (using the very
legacy `ActorNursery.run_in_actor()`.. due to be deprecated) rename it
to `test_run_in_actor_same_func_in_child`,
- don't re-enter `.open_root_actor()` since that's invalid usage (tested
in new suite see below),
- adjust some `spawn()` arg/var naming and ensure we only return in the
child.
For the new suite add tests for,
- ensuring the implicit `open_root_actor()` call under `open_nursery()`.
- double open of `open_root_actor()` from within the same process tree
both from a root and sub.
Intro some new `_exceptions` used in the new suite,
- a top level `RuntimeFailure` for generically expressing faults not of
our own doing that prevent successful operation; this is what we now
(changed in this commit) raise on attempts to open a 2nd root.
- mk `ActorFailure` derive from the former; it's already used from
`._spawn` when subprocs fail to boot.
Such that we can run (opting-in) tests on both TCP and UDS backends and
ensure the `reg_addr` fixture and various timeouts are adjusted
accordingly.
Impl deats,
- add a new `tpc_proto` CLI option and fixture to allow choosing which
"transport protocol" will be used in the test suites (either globally
or contextually).
- rm `_reg_addr` instead opting for a `_rando_port` which will only be
used for `reg_addr`s which are net-tpt-protos.
- rejig `reg_addr` fixture to set a ideally session-unique `testrun_reg_addr`
based on the `tpt_proto` setting making appropriate calls to `._addr`
APIs as needed.
- refine `daemon` fixture a bit with typing, `tpt_proto` timings, and
stderr capture.
- in `test_discovery` do a ton of type-annots, add `debug_mode` fixture
opt ins, augment `spawn_and_check_registry()` with `psutil.Process`
passing for introspection (when things go wrong..).
EventFD class now expects the fd to already be init with open_eventfd
RingBuff Sender and Receiver fully manage SharedMemory and EventFD lifecycles, no aditional ctx mngrs needed
Separate ring buf tests into its own test bed
Add parametrization to test and cancellation
Add docstrings
Add simple testing data gen module .samples
Demonstrates fixed size frame-oriented reads by the child where the
parent only transmits a "read" stream msg on "frame fill events" such
that the child incrementally reads the shm list data (much like in
a real-time-buffered streaming system).
Muchas grax to @guilledk for finding the first issue which kicked of
this further scrutiny of the `tractor.Context` and `MsgStream` semantics
test suite with a strange edge case where,
- if the parent opened and immediately closed a stream while the remote
child task started and continued (without terminating) to send msgs
the parent's `open_context().__aexit__()` would **not block** on the
child to complete!
=> this was seemingly due to a bug discovered inside the
`.msg._ops.drain_to_final_msg()` stream handling case logic where we
are NOT checking if `Context._stream` is non-`None`!
As such this,
- extends the `test_caller_closes_ctx_after_callee_opens_stream` (now
renamed, see below) to include cases for all combinations of the child
and parent sending before receiving on the stream as well as all
placements of `Context.cancel()` in the parent before, around and after
the stream open.
- uses the new `expect_ctxc()` for expecting the taskc (`trio.Task`
cancelled)` cases.
- also extends the `test_callee_closes_ctx_after_stream_open` (also
renamed) to include the case where the parent sends a msg before it
receives.
=> this case has unveiled yet-another-bug where somehow the underlying
`MsgStream._rx_chan: trio.ReceiveMemoryChannel` is allowing the
child's `Return[None]` msg be consumed and NOT in a place where it is
correctly set as `Context._result` resulting in the parent hanging
forever inside `._ops.drain_to_final_msg()`..
Alongside,
- start renaming using the new "remote-task-peer-side" semantics
throughout the test module: "caller" -> "parent", "callee" -> "child".
Namely that `add_hooks: bool` should be the same as on the rent side..
Also, just drop the now unused `iter_maybe_sends`.
This makes the suite entire greeeeen btw, including the new sub-suite
which i hadn't runt before Bo
Namely renaming and massively simplifying it to a new
`test_ext_types_over_ipc` which avoids all the wacky "parent dictates
what sender should be able to send beforehand"..
Instead keep it simple and just always try to send the same small set of
types over the wire with expect-logic to handle each case,
- use the new `dec_hook`/`ext_types` args to `mk_[co]dec()` routines for
pld-spec ipc transport.
- always try to stream a small set of types from the child with logic to
handle the cases expected to error.
Other,
- draft a `test_pld_limiting_usage` to check runtime raising of bad API
usage; haven't run it yet tho.
- move `test_custom_extension_types` to top of mod so that the
`enc/dec_nsp()` hooks can be reffed from test parametrizations.
- comment out (and maybe remove) the old routines for
`iter_maybe_sends`, `test_limit_msgspec`, `chk_pld_type`.
XXX TODO, turns out the 2 failing cases from this suite have exposed an
an actual bug with `MsgTypeError` unpacking where the `ipc_msg=` input
is being set to `None` ?? -> see the comment at the bottom of
`._exceptions._mk_recv_mte()` which seems to describe the likely
culprit?
By using our new `PldRx` design we can,
- pass through the pld-spec & a `dec_hook()` to our `MsgDec` which is
used to configure the underlying `.dec: msgspec.msgpack.Decoder`
- pass through a `enc_hook()` to `mk_codec()` and use it to conf the
equiv `MsgCodec.enc` such that sent msg-plds are converted prior
to transport.
The trick ended up being just to always union the `mk_dec()`
extension-types spec with the normaly with the `msgspec.Raw` pld-spec
such that the `dec_hook()` is only invoked for payload types tagged
by the encoder/sender side B)
A variety of impl tweaks to make it all happen as well as various
cleanups in the `.msg._codec` mod include,
- `mk_dec()` no defaul `spec` arg, better doc string, accept the new
`ext_types` arg, doing the union of that with `msgspec.Raw`.
- proto-ed a now unused `mk_boxed_ext_struct()` which will likely get
removed since it ended up that our `PayloadMsg` structs already cover
the ext-type-hook requirement that the decoder is passed
a `.type=msgspec.Struct` of some sort in order for `.dec_hook` to be
used.
- add a `unpack_spec_types()` util fn for getting the `set[Type]` from
from a `Union[Type]` annotation instance.
- mk the default `mk_codec(pc_pld_spec = Raw,)` since the `PldRx` design
was already passing/overriding it and it doesn't make much sense to
use `Any` anymore for the same reason; it will cause various `Context`
apis to now break.
|_ also accept a `enc_hook()` and `ext_types` which are used to maybe
config the `.msgpack.Encoder`
- generally tweak a bunch of comments-as-docs and todos namely the ones
that are completed after the pld-rx design was implemented.
Also,
- mask the non-functioning `'defstruct'` approach `inside
`.msg.types.mk_msg_spec()` to prep for its removal.
Adjust the test suite (rn called `test_caps_based_msging`),
- add a new suite `test_custom_extension_types` and move and
use the `enc/dec_nsp()` hooks to the mod level for its use.
- prolly planning to drop the `test_limit_msgspec` suite since it's
mostly replaced by the `test_pldrx_limiting` mod's version?
- originally was tweaking a bunch in `test_codec_hooks_mod` but likely
it will get mostly rewritten to be simpler and simply verify that
ext-typed fields can be used over IPC `Context`s between actors (as
originally intended for this sub-suite).
Including changes like,
- loose eg flagging in various test emedded `trio.open_nursery()`s.
- changes to eg handling (like using `except*`).
- added `debug_mode` integration to tests that needed some REPLin
in order to figure out appropriate updates.
Namely the `tractor.pause_from_sync()` examples using both bg threads
and `asyncio` which seem to go into bad states where SIGINT is ignored..
Deats,
- add `maybe_expect_timeout()` cm to ensure the EOF hangs get
`.xfail()`ed instead.
- @pytest.mark.ctlcs_bish` `test_pause_from_sync` and don't expect the
greenback prompt msg.
- also mark `test_sync_pause_from_aio_task`.
Seems that on 3.13 it's not showing our script code in the output now?
Gotta get an example for @oremanj to see what's up but really it'd be
nice to just custom format stuff above `trio`'s runtime by def..
Anyway, update the `.devx._stackscope`,
- log formatting to be a little more "sclangy" lookin.
- change the per-actor "delimiter" lines style.
- report the `signal.getsignal(SIGINT)` which i needed in the
`sync_bp.py` with ctl-c causing a hang..
- mask the `_tree_dumped` duplicator log report as well as the "dumped
fine" one.
- add an example `pkill --signal SIGUSR1` cmdline.
Tweak the test to cope with,
- not showing our script lines now.. which i've commented in the
`assert_before()` patts..
- to expect the newly formatted delimiter (ascii) lines to separate the
root vs. hanger sub-actor sections.
That is whenever `trio.EndOfChannel` is raised (presumably from the
`._to_trio.receive()` call inside `LinkedTaskChannel.receive()`) we need
to be extra certain that we let it bubble upward transparently DESPITE
special exc-as-signal handling that is normally suppressed from the aio
side; REPEAT we want to ALWAYS bubble any `trio_err ==
trio.EndOfChannel` in the `finally:` handler of `translate_aio_errors()`
despite `chan._trio_to_raise == AsyncioTaskExited` such that the
caller's iterable machinery will operate as normal when the inter-task
stream is stopped (again, presumably by the aio side task terminating
the inter-task stream).
Main impl deats for this,
- in the EoC handler block ensure we assign both `chan._trio_err` and
the local `trio_err` as well as continue to re-raise.
- add a case to the match block in the `finally:` handler which FOR SURE
re-raises any `type(trio_err) is EndOfChannel`!
Additionally fix a bad bug,
- a ref bug where we were NOT using the
`except BaseException as _trio_err` to assign to `chan._trio_err` (by
accident was missing the leading `_`..)
Unrelated impl tweak,
- move all `maybe_raise_aio_side_err()` content back to inline with its
parent func - makes it easier to use `tractor.pause()` mostly Bp
- go back to trying to use `aio_task.set_exception(aio_taskc)` for now
even though i'm pretty sure we're going to move to a try-fute-first
style helper for this in the future.
Adjust some tests to match/mk-them-green,
- break from `aio_echo_server()` recv loop on
`to_asyncio.TrioTaskExited` much like how you'd expect to (implicitly
with a `for`) with a `trio.EndOfChannel`.
- toss in a masked `value is None` pause point i needed for debugging
inf looping caused by not re-raising EoCs per the main patch
description.
- add a debug-mode sized delay to root-infected test.
Guillermo Rodriguez
Tyler Goodlet